AutoCAD .NET :: Creating Acad Plugins For Using Point Cloud Data
Jun 13, 2012I am looking for some good article/location on creating acad plugins for using point cloud data.
View 3 Replies
ADVERTISEMENT
AutoCAD Inventor :: Raw Point Cloud Data File
Dec 9, 2011Any (simple) raw point cloud data file.
View 2 Replies View RelatedAutoCAD Civil 3D :: Point Cloud Data - Processing Error
Jul 10, 20122012 SP2. I get this very descriptive message while trying to create a point cloud: The following error occurred processing the point cloud data: An error ocurred in data processing.
I've previously created point clouds from the same data (ENZ comma delimited) without a problem. I believe this was done before applying SP2. Any problems creating point clouds since SP2?
AutoCAD Map 3D :: How To Delete Index File For Point Cloud Data
Jul 16, 2013I'm hoping this could be a quick fix without completely reinstalling CAD.
I jammed too much LiDAR data into my Index file for point cloud data, and now I can not even open it. Even new drawings are trying to open the overall index with everything in it.
What I want to do is just delete the whole thing and start fresh again, but not sure how to do that. If I could open it once I could start deleting stuff from it, but it is too large to even open.
AutoCAD Civil 3D :: Creating TIN From Point Cloud
Dec 11, 2011I have been searching for a solution to a problem i have been having. I have a point cloud, and I am wanting to TIN it to create a surface.
When I use the Create Surface tool, no dialog box appears. Everything I have found seems to rely on this Dialog Box. How to get it to display?
Using AutoCad Civil 3D 2011.
AutoCAD Civil 3D :: Import Point Cloud Data From Source (NASA)
Jul 12, 2012It was in Feb - March 2012. I was then using AutoCAD Civil 3D 2012. I had faced a problem of getting ground data for a large surface by using satellite imageries processed by some government wing of USA (NASA?), have lost track of it.
View 6 Replies View RelatedAutoCAD 2010 :: Matching Up Point Clouds Using Alignment Tool / Smooth Object From Point Cloud
May 30, 2012how to match up certain points. I have imported 2 point clouds and have tried to use the 'align' tool to specify three points from the source object (cloud) and three points from the destination object (cloud). When doing this, it does not properly align them. The point cloud makes it difficult to select the exact point I would like to align, since there may not be a point at that exact location, but close to it. Does AutoCAD require the points in alignment to match up perfectly or is it capable of doing a best fit?
Also, is AutoCAD capable of creating a solid 3D piece from the point cloud? I would like to take all of my points and make a smooth object.
AutoCAD .NET :: How To Access Point Position Within Point Cloud
Mar 29, 2010AutoCAD 2011. C#
How to access the point positions within a Point Cloud using C#? Or is this function not provided in the managed class?
AutoCAD .NET :: Point Positions In A Point Cloud?
Apr 6, 2012how to access the positions of every points in pointcloud(.pcg files)?
Isn't it available in ObjectARX.NET 2012?or should I write my own warpper for .NET?
Photoshop :: Use Of Plugins In Creative Cloud
Feb 13, 2013Can I use my Photoshop plugins, such as Portraiture or Retouch Me, in Creative Cloud?
View 11 Replies View RelatedPhotoshop :: How To Move NIK Software Plugins To Creative Cloud From CS5 On Mac
Nov 6, 2013how do I move my Nik software plugins to PS creative cloud from PS cs5 on a mac?
View 1 Replies View RelatedPhotoshop :: Creative Cloud Single App Subscription Plugins?
Apr 16, 2013If I purchase a Creative Cloud single app, Photoshop subscription, can I use my photoshop plug-ins?
View 1 Replies View RelatedPhotoshop :: Missing Plugins From Creative Cloud CS6 Download?
Sep 9, 2012I am missing all the default Plug-ins from Photoshop CS6 from the Creative Cloud. I have uninstalled it. Used the Adobe Cleaner Tool. Done this over and over 4x and the Plug-ins are still missing from the new installation. It is like the Cloud is only re-installing the previous bad version. I also check don't migrate and don't save preferences.
View 4 Replies View RelatedAutoCAD Civil 3D :: Import Point Data For Each Point Includes Hyperlink
Jan 17, 2013I have a database of points I am trying to import, and the point data for each point includes a hyperlink. I've created a set of custom User-Defined Property Classifications for all the data types in the point database, and I've created a point file format to use to import the points.
It's a database of existing curb ramps, the data includes things like widths, slopes, some text, and a hyperlink to the Google Streetview at each ramp. I've created a custom point label that will show the data I need to see at each ramp.
All goes great except that the import fails because of the hyperlinks. I've tested it by removing the hyperlinks from a small test portion of the data set, and the test points are then successfully imported. I suppose I can delete the hyperlinks from the entire database, but if there is a way to include the hyperlinks in the point import I would prefer that.
Win 7E 64-bit, Intel i7, 12 GB
C3D 2012
AutoCAD Map 3D :: Import Point Data With Object Data?
Jan 20, 2011how to import point data that has Map Object Data also attached to it? "import it by attaching to a data source".
Example: I have a bunch of manholes. Each MH has X,Y,Z, but also Type, Invert Elevs., Pipe Sizes, Pipe Materials, Pipe Directions, Structure Type/Material, etc. etc. etc. I may have point data representing MH's, airport runway ends, trees, anything you can imagine, with all kinds of data imaginable.
I want to import this data directly into Autocad/Civil 3D as either Autocad points, lines, or closed polylines (I also have utility lines, parking lots, etc.- all with data associated with it), all with the data attached as object data. I know that anything more complex than points might be hard to explain here, so I am hoping at least for a solution on how to import points - I have 99,999 MH's and obviously I don't want to have to type all that data in one by one.
I basically suck at using sql server. I can get around using the Map workspace and the different tabs. I have never used FDO, and I am not even sure what it is.
I fooled it today by creating 99,999 Autocad points at the correct XYZ, attaching the correct object data to them, then exporting as a shp file. I went into the shp_name.dbf file and edited it to add the data I wanted by cutting & pasting from Excel. then I re-imported the shp file. but, this is a workaround at best.
Surely Map can import objects and their associated data fields, all populated with valid data! all I need is to know how to do it. I mean, if this is not something I can do directly using Map commands should I take the money I earned by surveying 99,999 MH's with my GIS data collector that allows me to assign 101data fields to each object I survey, and buy something better?
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
AutoCAD Map 3D :: Point Cloud Not Aligning?
Mar 8, 2011I can get my stylised map from Promap into Map3d 2011, and I have tried importing the point cloud data which I have as a esri ascii grid file, it is basically 3 columns of numbers:- for north, east and height.
Unfortunately when I choose to format as nez (when importing) it turns the whole lot round by 90degrees ...
I have tried importing it as enz but no joy, and also in niether case will it align with my map (have tried using coords and not using coords).
AutoCAD .NET :: How To Get Coordinates Of Point Cloud
Mar 27, 2012I use POINTCLOUDINDEX to convert .las file to .pcg file, then I use POINTCLOUDATTACH to add .pcg file to model space.
How can I get the 3d coordinates of points in .pcs files?
I use ObjectARX in .net.
I can't find any Entity types related to pointcloud, should I find in other namespace?
AutoCad 3D :: Snapping With Point Cloud
Jan 3, 2012I am trying to trace part of my point cloud, which has been aligned according to a new UCS I set. Drawing on the top down view, a poly line works fine out in the black ether or the model space, however when I attempt to trace over the point cloud it shoots way off in the distance.
My node snapping is turned off of course, but this only happens when I click over a part of the point cloud, as if it was snapping to the cloud and getting confused.
When I turn snapping off completely I can click anywhere I want and I'm fine. This suggests to me that it is a snapping issue, although I was under the assumption that "Node" was the only snap setting that related to point clouds.
AutoCAD VB :: Edit Point Cloud With NET?
Apr 20, 2012AutoCAD 2013 point clouds can have a 3D bounding box displayed, and you can grab the grips to edit the box, x, y and z. It's a nice feature.
Using vb.net, will I be able to programmatically move those bounding box points?
AutoCAD Civil 3D :: Point Cloud Index
Aug 7, 2012Point Cloud Index fails on Faro Scans that work in 2012???? Tools in 2013 seem better. Civil 3D and Point Cloud data.
View 4 Replies View RelatedAutoCAD Civil 3D :: PCG Point Cloud Bounding Box?
May 18, 2012Using Civil 3D 2013, Faro Scene 4.8.2.25521, Kubit PointCloud Pro 8.0.4.7.
Is it possible to turn off the bounding box on a non-Civil 3D, .PCG point cloud that was indexed into Civil 3d directly from the Faro .FWS file using the "POINTCLOUDINDEX" command?
AutoCAD Map 3D :: Convert Point Cloud To Solid
Mar 19, 2013Supposedly there's a way "To Convert One or More Surfaces to Solids":
[URL]
However, I'm unable to find Home tabSolid Editing panelThicken.
I'm trying to take LIDAR/Point Cloud data and 3D print it (in the end, I need to make an STL file). I've created a 3D surface from Point Cloud data which results in a Raster Layer. I do not know how to convert the surface that's in the Raster Layer into a solid.
AutoCAD Civil 3D :: Point Cloud 3D Rotation
May 23, 2012How can I rotate my point cloud to have the front view on the top. I want to optimize the surface creation on the lateral surface of a deck and not on the ground (top) surface. I think to rotate 90 degrees on the X or Y axis.
View 3 Replies View RelatedAutoCAD Map 3D :: Selecting Points From A Point Cloud
Nov 22, 2011I was wondering if there is a way to select specific 3D points out of a point cloud (.pcg). I am new with Autocad and handling of point clouds .
I can think of various things that you might want to do, as in clean up a bit the data or even delete some areas that you are not interested with. additionally, one might want to do some calculations, so selecting points first and the running a list script to use that points can be handy as well.
AutoCAD 2013 :: Point Cloud Color
Mar 7, 2013I'm working with a point cloud in 2013. The color comes in when I convert to .pcg and import into Revit. But I can't get the color to display in CAD. I've heard it may be a visual style problem, or a setting in my hardware acceleration, but nothing seems to work.
View 2 Replies View RelatedAutoCAD Map 3D :: Point Cloud Menu Not Visible
Apr 17, 2013I'm trying to access the style manager to allow classifying LiDAR point cloud based on elevation. I have been able to attached the point cloud and see it on the drawing. For some reason I can't see the Point Cloud Menu, which I believe should be showing up beside "Express" menu on the top toolbar.
I have AutoCAD Map 3D 2011.
AutoCad 3D :: How To Create Surface From Point Cloud
Sep 12, 2013I have a point cloud of an excavation surface, i want to create a surface from this points. 3d civil can do it but im not 3d civil user, is there any way to do it in autocad or in 3ds max.
View 5 Replies View RelatedAutoCAD Civil 3D :: Point Cloud Different Tools
Nov 19, 2013Civil 3D point cloud tools (ribbon) are different than AutoCAD's. Is there a way to bring up AutoCAD's point cloud ribbon in addition to Civil 3D's ribbon?I guess if the commands are the same, I can just copy the ribbon from AutoCAD's CUI and plop it into Civil 3D's CUI.
But, is there a better way or is there something I'm missing?I'm looking for the clipping tools and the point cloud display otions (scan colors, elevation, normal, intensity, etc.)
AutoCAD Inventor :: 3D Scan In Point Cloud Format
Sep 19, 2012I have 3d scan of aircraft door frame (see attach) in point cloud format. I'd like to overlap 5 different frames and construct a new 6th frame by averaging out all of the points.
At the moment, the 3d data files has no surface and I'm unsure if adding surface with the construction of the 6th frame. I will also need to take into consider alignment, point density, and orientation when overlapping all of the frames before I can start work to average all points (Note: each scan are taken from 5 different vehicle).
I have both Rhino3D and Autodesk Alias Design 2012. What are the logical steps to do in this case?
AutoCAD 2010 :: Color Point Cloud Plotting
Jul 12, 2012Is there a way to plot a color point cloud (PCG) in color in a viewport in paperspace? I can't seem to figure it out if there is.
View 2 Replies View RelatedAutoCAD Civil 3D :: Clip Or Filter Point Cloud
Sep 1, 2011I am working with a Lidar dataset that is over 34 million points. It covers an area far larger than I need for our project. I have experimented with point clouds and am able to process and generate a surface from the data by applying a clip boundary to the surface. The problem with this is the surface only has about 540k points out the total dataset and it appears that the points have been greatly reduced in density. I am thinking this is due to the way C3D limits large data sets to display only 1.5 million points and thus my surface data is highly filtered since it is extracted from a small area of the dataset. I have tried setting point cloud display to 100%.
can I somehow filter my point cloud so that I can reduce the area of coverage and thus increase the density that is extracted into my surface?