I have tried and tried again but there is something preventing me from opening PSDs and JPGs. Along with that, when I first start up the program, I have about a thousand errors all having something to do with Plugin.dll.
View 1 RepliesI can get Photoshop CS2 to open up and work fine. Only, I cannot get it to open any files up. .jpgs, .pngs, and even .psds don't open. It says that there is a program error, and it doesn't say what that error is exactly.
I've tried "Open As" and tried to open the files as something different but that didn't work at all. I can open up images in ImageReady, yet I can't transfer them back to Photoshop to work on them. It also won't allow me to create a new canvas, (the same message pops up).
I recently moved, but I'm not sure if that would have caused any issue for Photoshop to act up like this. Everything else on the computer works fine and dandy. And it hasn't ever done anything like this before.
I'd rather not have to uninstall and then reinstall it,
I just bought a website template and there are certain files that won't open in gimp like psd's and even some png's and jpg's (though the ones I need most do). My girlfriend was able to open the psd's in photoshop. Anyway to get all these files to open in gimp?
I've attached the psd, the png and jpgs wont attach (maybe because they are tiny 70 byte files that dont matter). (Im using Windows 7 64 bit)
Is there a way to delete the LR metadata from files? I can delete the xmp sidecars using the OS, but I also want to delete all the LR metadata from jpgs, etc . Is there a plugin that will do this, or do I have to use exiftool?
View 10 Replies View RelatedI'm receiving the error 'Could not complete your request because of a program error' when I try to open some psd's.
Â
The last few entries in the error log are ...
Â
2012:12:17 09:32:36 : /Volumes/workarea/PS_13.1_Mac_Daily_Retail/20121126.r.220/photoshop/m ain/photoshop/xcode/../sources/USheetFX.cpp : 4482 : REQUIRE failed
2012:12:17 09:32:43 : /Volumes/workarea/PS_13.1_Mac_Daily_Retail/20121126.r.220/photoshop/m ain/photoshop/xcode/../sources/USheetFX.cpp : 4482 : REQUIRE failed
2012:12:17 09:33:35 : /Volumes/workarea/PS_13.1_Mac_Daily_Retail/20121126.r.220/photoshop/m ain/photoshop/xcode/../sources/USheetFX.cpp : 4482 : REQUIRE failed
I have about 40GB of .jpegs and some Photoshop files that I can no longer open. When I try to open the .jpegs, Photoshop says Invalid JPEG marker. Windows Picture Viewer says no preview available. Internet Explorer just shows a small x in the corner. Others like IrfanView or Paint and say things like Image Header Corrupted or Invalid File Type. I have tried a dozen applications with no luck. I have tried several recovery tools with no luck. The files themselves are still there. The dates are correct and the file sizes are correct. They just can’t be previewed or opened. When I open them in wordpad, the screen is empty. When I open them with a Hex editor, I get all 0’s in the middle section and dots in the right section. When I zip them, the compressed file is still relatively large so there must be some data there.
I had the files on a hard drive (D) that I use for storage. My computer got zapped with a virus or spyware that I was unable to remove so I reformatted my system drive (C) and reinstalled a fresh version of Windows XP. I have done this a half dozen times over the years on several different computers with no problems. This time was different. After Windows installed, I got a screen that said something about orphaned files and that Windows was updating them or renaming them. It scrolled for about an hour through all of my .jpegs.
After this was finished I could not open about half of my .jpegs on the D drive. (I have a backup off most of my files but there about 1,000 shots that I hadn’t back up yet.)
Does anyone have any clues as to what happened or how I can open these files?
I have a few older PSDs that were saved with Photoshop CS that will not open in GIMP or in IrfanView... instead of the PSD layers, I get a white image that has a message in four languages that says, "This layered Photoshop file was not saved with a composite image".
Yet I have other layered PSDs that were saved of similar images at the same time that do open in GIMP just fine.
Also what is very strange here in these files that won't show their image is that the paths in these original PSDs do show up in GIMP, but normally GIMP cannot read path information from PSD files... or from PSDs saved in GIMP anyway.
how to get these images to open with their original content, or show their images at all?
is there a max plugin that identifies errors on a mesh? I have a .obj file I imported. I know it has some problems like holes or doubles shared edges and unwelded vertics. I am just looking for a program or max plugin that can point out those errors?
View 1 Replies View RelatedI'm using Vista 32. After updating to CS4 I can no longer open jpg files directly into PS by clicking on the file in windows explorer or an e-mail. After much searching and looking for file associations, I was able to get jpgs to open into Bridge from windows explorer, but still cannot get them to open directly in PS. When I attempt to open a jpg from an e-mail message, I get a window in Bridge pointed to a temp folder.
View 6 Replies View Relatedwhen I try to open a jpg nothing happens. I'm just doing what I normally do, File > Open then navigate to the jpg, but since this latest cat-sitting incident when I do this the jpg will not open. I get nothing but the big gray Photoshop main page.Â
View 3 Replies View RelatedI downloaded Photoshop CC the other day, and it worked fine. Today when I try and open Photoshop I am getting a multitude of errors about ‘FastCore Routines Module’, ‘MMXCore Routines module’, ‘Multiprocessor Support module’, and then that it could not ‘initialise Photoshop the internal file signature is incorrect’.
View 2 Replies View RelatedI have a Fedora 17 distro installed on a couple of different machines. I am unable to open pictures and scans, I have, which are in 'jpeg/jpg' format. I understand the saving/exporting thing, but I am unable to even open them.
I am using Kernel 3.6.6-1.fc17.x86_64 and Gnome 3.4.2. The version of Gimp I am using is 2.8.2-6.fc17.
I can't open a drawing I saved yesterday afternoon. I always get a fatal error after reaching 98%. When i try doing recovery I get a message that is something like a program failure.Is there any way to open that drawing?
View 9 Replies View RelatedEvery drawing I created using LT 2009 opens now with "Open Drawings - Errors Found" window telling me the drawing has xxx numbe of errors and asking me whether to continue or close and recover. Why is it doing this?
View 6 Replies View RelatedIs it possible to programatically suppress dialogs or warnings and errors when I open Inventor?
View 1 Replies View RelatedI installed the PSD plugin so I could go to Photoshop edit a color/BW photo in Photoshop. In paint.net the file was saved as a psd file although photoshop can not open it?
View 1 Replies View RelatedI'm looking for a plugin that enables PS CS5 (64-Bit) to read/open .ECW files.The only plugin that I found (ResMap's "Adobe Photoshop ECW v2.0 Read and Write Plug-in") works only with the 32-Bit PS (confirmed this with the publisher).
Â
Since we do not install the 32-Bit PS additionally to the 64-Bit PS in our offices there is a real need for a 64-Bit ECW-plugin.
I am running PS CS6 on a MacBook Pro retina(OSX 10.8.3), and PS CS5 on an iMac(OSX 10.8.4).I recently installed the Kwik 2 plugin, from Kwiksher.com
Â
Installation via Extension Manager goes normally.When I open the Kwik 2 panel, I see it try to open it's SWF UI, but after a few seconds I get the twirling colorful ball, and photoshop stops responding. Only option is to force quit.
Â
I created a new user on this machine to try to narrow things down. When I log in as that other user, everything works, Kwik 2 plugin panel opens normally and I can work with the plugin.I'm trying to figure out how I can troubleshoot this. I can't seem to find any place where Photoshop creates logs in situations like this.Apparently, something is being loaded (or not loaded) when I log in with my normal username.
When I try to open raw files from Sony NEX-5 instead of going to PhotoShop like all my NEF files, they go to another software suite that I have (On-One).Â
I am running MAC OS 10.7.5 with latest PS-CS6 and latest raw converter plug-in 7.1. On-One seems to hi-jack these Sony raw files and won't give me the opportunity for the adjustments that I get with the Adobe Raw File converter.
I recently upgraded my computer from windows 7 32 bits to win 7 64 bits. I am trying to use Photoshop cs6 64 bits, however I cannot open any files in camare raw (the plugin does not exist). also I cannot update Photoshop (last I tried from update submenu was Adobe CSX6 InfrastructureCS6). What I need to do to use camera raw in 64 bits and to update photoshop?
View 1 Replies View RelatedI've just upgraded from Photoshop 7 to CS and I love everything (especially those very cool layer comps!). What I don't like is the fact I have an old PSD of a site I did and the client wants a new page as a template. One of the fonts I used in the layout was Myriad Italic which was a font I had access to in Photoshop 7, but not now in Photoshop CS.
Just for you information, I installed CS on a new hard drive. I've exported all my old fonts from the other system onto the new one, so I'm scratching my head over where the font could have went.
This sort of leaves me in a pickle with the client because I don't have the font for the header text of the page.
Did anybody have a similar problem? What did you do to fix it?
1) I'm not buying the font....
2) I'm not redoing all the headers on all the pages! (well....not yet anyway!).
When I first got CS5 I was having problems with color management. Not sure how to explain this, but the colors in the preview pane differed drastically after I clicked on the photo to edit . That is, as soon as I clicked on the photo I wanted to edit, it turned out much duller. the reds suddenly become brownish orange. and they're not raw, so that's not the problem. Although I shoot in Adobe RGB I set the color management to SRGB and (I don't remember what else I set) and when I clicked on a photo to edit, I would get the message where I had the ability to discard the icc profile (no color management) and that's what I chose. there were all my rich colors, and it was worth the hassle of doing that with every unedited photo.Â
Â
I turned CS5 on and everything had changed. Now I'm back to seeing the dull colors in CS5, even the one's that I already edited. I have some photos with rich red, they're fine on my website, but in photoshop dull brown.
Â
I'm temporarily back to using Corel, because for some reason it has no problem displaying the correct colors. So it's something going on with PS. I think somehow, though I don't know how, maybe some setting got changed. But am desperate. I've tried all sorts of combinations. using the adobe setting, switching things on and off and dull, dull, dull.
I'm getting the EPIC_APP will not launch problem trying to launch Acrobat, so I try to launch Photoshop, Dreamweaver, Flash, etc., get the License Agreement screen, accept it, it goes away, and nothing more happens (incl. no indication in Task Manager that it has started). I have a working internet connection (obviously, or I wouldn't be able to submit this question), but could it be a firewall issue anyway? If not, what gives? It's a fresh install of Adobe MC CS3 on a Toshiba Sattellite L305-S5933 running 32 bit Windows Vista Home Premium SP1 w/ 3GB of RAM. Please help: I'm trying to use Acrobat to edit my 1040 and, obviously, time is of the essence!
View 3 Replies View Relatedi have some pics that were taken at an outside picnic. the sky behind the subjects is almost white, but they are in really deep shadow. When i fix the subjects the rest of the photo is really bad. I've made some headway with adjustemnt layers and masks, but is there anything else i could be doing?
View 8 Replies View RelatedSince I updated CS6 recently (I use the creative cloud) I have had problems with saving some PSDs in photoshop. My workflow is as follows: I import from lightroom 4 as 8bit psds into Photoshop, do my editing and then click to close the file. Then usually the save box would pop up and I would click "save", sending the psd back to Lightroom. This still works on some files, but others just close (even though I have done substantial editing on them) and I have lost a lot of time, having to redo the editing. I tried to use the "save as" command and the file is saved correctly and is also sent back to lightroom, but it takes so much longer and is annoying to do... I have tried to close and reopen the applications, but it still happens...
View 1 Replies View Relatedphotoshop and resolutions. Will there be problem if my graphic's resolution is 72px/in and i print it out right away.
I tried creating and my settings was legal, you know paper legal, and the resolution was 300 and the workspace was gigantic.
where I can get some Nutrition or healthy PSD's from? I was to make some flyers or poster to hang in my work for March which is Nutrition month. Its to promote healthy eating and living.
View 1 Replies View RelatedI have PhotoShop 7 and all the sudden when I open my PSDs I get this
wxchat.com/help.jpg
What are these lines all over my psd? and how can I get rid of them?
I'm not very organized, and im missing a lot of files. Is there a way to search for a specific file type, and pull up a list of all psds on my computer?
View 3 Replies View RelatedThe Liquify filter in PS 13.0 x64 does not work correctly. The Forward Warp, Magnify and Hand tools work okay, but the rest of them produce the same strange effect of a jumbled combination of swirl and black on white dot patterns. ending with a circular "transparent" pattern. I have just installed after removing 5.5 and using the Adobe Cleaning Tool. There were multiple errors in the installation log file, which I saved. I'm running Win 7 fully patched and up to date. I have a Toshiba Tecra wiith 6GB of RAM and an ATI Radeon DH 6450M GPU.
All three of the non-functioning tools begin with a swirly pattern quickly being jumbled by dots and checkerboard. If you hold the click for a few seconds it ends up looking like the above image.I use the liquify filter a lot and I don't want to waste a fortune by going back to CS55.
I have several .psd images that I need to turn into .swf's. The only solution I can figure is to place the psd into illustrator and save. Is there a faster/easier option as I have hundreds of files that I need to do this to! I also need them to be .pngs.
View 13 Replies View Related