Photoshop :: Cannot Open Files (.jpgs .pngs .psds) In PS-CS2

Oct 5, 2007

I can get Photoshop CS2 to open up and work fine. Only, I cannot get it to open any files up. .jpgs, .pngs, and even .psds don't open. It says that there is a program error, and it doesn't say what that error is exactly.

I've tried "Open As" and tried to open the files as something different but that didn't work at all. I can open up images in ImageReady, yet I can't transfer them back to Photoshop to work on them. It also won't allow me to create a new canvas, (the same message pops up).

I recently moved, but I'm not sure if that would have caused any issue for Photoshop to act up like this. Everything else on the computer works fine and dandy. And it hasn't ever done anything like this before.

I'd rather not have to uninstall and then reinstall it,


Photoshop :: Cannot Open Anything But PSDs And JPGs And Plugin.dll Major Errors

Oct 22, 2006

I have tried and tried again but there is something preventing me from opening PSDs and JPGs. Along with that, when I first start up the program, I have about a thousand errors all having something to do with Plugin.dll.

View 1 Replies View Related

Photoshop :: No Colour Consistency With JPGs & PNGs Saved In PS

Jun 20, 2006

I made a coloured square in PS. I saved it as a JPG. I saved it as a PNG. I saved it as a PSD. I dragged all three of these into InDesign. The JPG and the PSD were the same colour. The PNG was different. Now, before you all say that PNG's do funny things to colours, let me just say that the PNG was the ONLY one out of the three that matched a coloured square I made in InDesign with the same RGB values as what I made in PS. Both programs were using the same colour settings.

Just for interests sake, I tried the same experiment in Illustrator. Interestingly, I had no problems in Illie - all 3 (JPG, PNG and AI) files were the same colour as each other AND the same colour as the test square in InDesign.

I design graphics for Scrapbooking kits which I am beginning to sell and need both JPGS and PNGS (because of transparency) for these kits. AND I need the colour to be consistent. I also design in Illustrator (where there appeared to be no problems), but obviously there are some things that are simply not possible in Illustrator.

View 9 Replies View Related

Photoshop :: CS6 13.1 - Can't Open Some PSDs

Dec 17, 2012

I'm receiving the error 'Could not complete your request because of a program error' when I try to open some psd's.
The last few entries in the error log are ...
2012:12:17 09:32:36 : /Volumes/workarea/PS_13.1_Mac_Daily_Retail/20121126.r.220/photoshop/m ain/photoshop/xcode/../sources/USheetFX.cpp : 4482 : REQUIRE failed
2012:12:17 09:32:43 : /Volumes/workarea/PS_13.1_Mac_Daily_Retail/20121126.r.220/photoshop/m ain/photoshop/xcode/../sources/USheetFX.cpp : 4482 : REQUIRE failed
2012:12:17 09:33:35 : /Volumes/workarea/PS_13.1_Mac_Daily_Retail/20121126.r.220/photoshop/m ain/photoshop/xcode/../sources/USheetFX.cpp : 4482 : REQUIRE failed

View 1 Replies View Related

Photoshop :: Cannot Open JPEGs Or PSDs

Feb 25, 2007

I have about 40GB of .jpegs and some Photoshop files that I can no longer open. When I try to open the .jpegs, Photoshop says Invalid JPEG marker. Windows Picture Viewer says no preview available. Internet Explorer just shows a small x in the corner. Others like IrfanView or Paint and say things like Image Header Corrupted or Invalid File Type. I have tried a dozen applications with no luck. I have tried several recovery tools with no luck. The files themselves are still there. The dates are correct and the file sizes are correct. They just canít be previewed or opened. When I open them in wordpad, the screen is empty. When I open them with a Hex editor, I get all 0ís in the middle section and dots in the right section. When I zip them, the compressed file is still relatively large so there must be some data there.

I had the files on a hard drive (D) that I use for storage. My computer got zapped with a virus or spyware that I was unable to remove so I reformatted my system drive (C) and reinstalled a fresh version of Windows XP. I have done this a half dozen times over the years on several different computers with no problems. This time was different. After Windows installed, I got a screen that said something about orphaned files and that Windows was updating them or renaming them. It scrolled for about an hour through all of my .jpegs.

After this was finished I could not open about half of my .jpegs on the D drive. (I have a backup off most of my files but there about 1,000 shots that I hadnít back up yet.)

Does anyone have any clues as to what happened or how I can open these files?

View 1 Replies View Related

GIMP :: Can't Open Some PSDs

Apr 14, 2011

I have a few older PSDs that were saved with Photoshop CS that will not open in GIMP or in IrfanView... instead of the PSD layers, I get a white image that has a message in four languages that says, "This layered Photoshop file was not saved with a composite image".

Yet I have other layered PSDs that were saved of similar images at the same time that do open in GIMP just fine.

Also what is very strange here in these files that won't show their image is that the paths in these original PSDs do show up in GIMP, but normally GIMP cannot read path information from PSD files... or from PSDs saved in GIMP anyway.

how to get these images to open with their original content, or show their images at all?

View 2 Replies View Related

Photoshop :: Getting Transparencies In .pngs Files ??

Feb 28, 2005

I need to have transparencies in a .png file

I am trying to edit a pic for an avatar and need them to have transparencies (i.e. no white space around the pic) and dont seem to be able to do it in PS Can it actually be done or do it have to go with gifs ??

View 5 Replies View Related

Photoshop :: CS4 - Cannot Open JPGs Directly Into PS

Nov 8, 2008

I'm using Vista 32. After updating to CS4 I can no longer open jpg files directly into PS by clicking on the file in windows explorer or an e-mail. After much searching and looking for file associations, I was able to get jpgs to open into Bridge from windows explorer, but still cannot get them to open directly in PS. When I attempt to open a jpg from an e-mail message, I get a window in Bridge pointed to a temp folder.

View 6 Replies View Related

Photoshop :: Converting 24 Bit Pngs To 32 Bit Pngs

Jul 8, 2005

I've been stuck with the task of creating textures for the people's clothes and etc. He sends me the main templates which are 24 bit pngs . and I have to edit them and then save them as 32 bit png . everytime I save them as pngs though they default to 24 bit is there anyway to change them to 32 bit ?

View 1 Replies View Related

Corel PHOTO-PAINT X6 :: Open / Save Transparent PNGs Without Loss Of Image Information?

Feb 28, 2013

Till X3 Photo-Paint opened and saved transparent PNGs as a seperate image with attached mask.Example:I have an image and load a B/W mask into it.

When I save this as PNG and reload it in X3, Photo-Paint displays again exactly what I have just saved:

However when I open this same PNG in X6, the image and mask get merged into a single object:

It's in effect doing automatically a "create object from selection" function and discards then the background.Why? I can't work with the full background image anymore, because the transparent parts are missing, and the mask is also gone. Is there no way to open the full PNG, without any merging and deleting of masks, just the way X3 was doing it?Also, the only way to save a transparent PNG in X6 is to check "save only selected objects"? When I don't check this, but still check "transparency" in the PNG export dialogue, then the mask won't be saved nonetheless.

View 7 Replies View Related

GIMP :: 2012 - Cannot Open Pictured And Scans (JPEGs / JPGs Format)

Dec 20, 2012

I have a Fedora 17 distro installed on a couple of different machines. I am unable to open pictures and scans, I have, which are in 'jpeg/jpg' format. I understand the saving/exporting thing, but I am unable to even open them.

I am using Kernel 3.6.6-1.fc17.x86_64 and Gnome 3.4.2. The version of Gimp I am using is 2.8.2-6.fc17.

View 6 Replies View Related

Photoshop :: "Photoshop Jpgs" Vs "jpgs." Files Default

Apr 28, 2006

I have given a disc of photos to a client that she can't access without launching Photoshop on her Mac. They were scanned by me on an Epson as jpgs, then run through Photoshop (CS1) for touch-up and resaved as jpgs by me. Now I look under "get info" and see that they are all saved as "Photoshop Jpgs". this can be a big problem, as I intend to make a lot of discs for clients in the future. I don't want to have to tell them to use "Open with" every time they want to view a photo.

View 1 Replies View Related

Photoshop :: PSDs Not Saving In CS6?

Mar 26, 2013

Since I updated CS6 recently (I use the creative cloud) I have had problems with saving some PSDs in photoshop. My workflow is as follows: I import from lightroom 4 as 8bit psds into Photoshop, do my editing and then click to close the file. Then usually the save box would pop up and I would click "save", sending the psd back to Lightroom. This still works on some files, but others just close (even though I have done substantial editing on them) and I have lost a lot of time, having to redo the editing. I tried to use the "save as" command and the file is saved correctly and is also sent back to lightroom, but it takes so much longer and is annoying to do... I have tried to close and reopen the applications, but it still happens...

View 1 Replies View Related

Photoshop :: Printing Psds

Jul 4, 2007

photoshop and resolutions. Will there be problem if my graphic's resolution is 72px/in and i print it out right away.

I tried creating and my settings was legal, you know paper legal, and the resolution was 300 and the workspace was gigantic.

View 9 Replies View Related

Photoshop :: Nutrition / Healthy PSDs

Feb 24, 2012

where I can get some Nutrition or healthy PSD's from? I was to make some flyers or poster to hang in my work for March which is Nutrition month. Its to promote healthy eating and living.

View 1 Replies View Related

Photoshop :: Erronous Lines On My Psds?

Mar 10, 2006

I have PhotoShop 7 and all the sudden when I open my PSDs I get this

What are these lines all over my psd? and how can I get rid of them?

View 7 Replies View Related

Photoshop :: Is There A Way To Search Your Computer For .psds?

Aug 22, 2007

I'm not very organized, and im missing a lot of files. Is there a way to search for a specific file type, and pull up a list of all psds on my computer?

View 3 Replies View Related

Photoshop :: Unable To Open Files From The File OPEN On MAC

Jan 21, 2009

I am unable to open files from the file "OPEN". I can open from Bridge or open recent document, but not from just File, Open.

My operating system is Mac OS X.

View 3 Replies View Related

Photoshop :: Marks In PSDs When Moving Edit Layers In CC

Nov 20, 2013

I have just upgraded this evening to PS CC after I upgraded I cannot now move any type without it leaving marks over any images in the PSD file when I save the file as a jpeg etc the marks are still there. They appear even if the image layer is turned off or I delete the image layer...move the edit then paste the image back into the PSD...the marks still appear.

View 4 Replies View Related

Photoshop :: CS6 Layered PSD To PNGs

Nov 3, 2012

I have to import a set of png's from Photoshop to Edge Animate. The actual source file is a Photoshop psd but I cannot import the psd into Edge so I have to painstakingly export each layer as a png and there are over 40 layers. Is there a way to take a layered Photoshop file and turn those layers into transparent pngs so when they import to Edge or another app the layers would remain intact but just as png's?

View 2 Replies View Related

Photoshop :: PS CS And Transparent Pngs

Feb 5, 2004

W/ 6 & I think 7, in order to create a transparent png I would have to save the file (single layer PSD w/ transparancy) and open it up in Image Ready, or click on the image ready button to send the image over. Then I would have to select PNG and optimize it, and it would save the transparency.

If I would try to do this all within PS, the transparent areas are saved as white, so the image was not transparent.

Do I still have to do this w/ CS, or can you really save truley transparent pngs within Photoshop now?

View 1 Replies View Related