I need to have transparencies in a .png file
I am trying to edit a pic for an avatar and need them to have transparencies (i.e. no white space around the pic) and dont seem to be able to do it in PS Can it actually be done or do it have to go with gifs ??
I've been stuck with the task of creating textures for the people's clothes and etc. He sends me the main templates which are 24 bit pngs . and I have to edit them and then save them as 32 bit png . everytime I save them as pngs though they default to 24 bit is there anyway to change them to 32 bit ?
View 1 Replies View RelatedI can get Photoshop CS2 to open up and work fine. Only, I cannot get it to open any files up. .jpgs, .pngs, and even .psds don't open. It says that there is a program error, and it doesn't say what that error is exactly.
I've tried "Open As" and tried to open the files as something different but that didn't work at all. I can open up images in ImageReady, yet I can't transfer them back to Photoshop to work on them. It also won't allow me to create a new canvas, (the same message pops up).
I recently moved, but I'm not sure if that would have caused any issue for Photoshop to act up like this. Everything else on the computer works fine and dandy. And it hasn't ever done anything like this before.
I'd rather not have to uninstall and then reinstall it,
If I have a jpg or PSD file of a picture frame and I wanted to have the center be transparent how would I accomplish that. I have a program called PRO Show Producer that will let me put a picture in motion into the transparent window of a picture frame. I have a picture frame but the center is not transparent. I'm running Windows Vista.
View 9 Replies View RelatedI have two images, a picture and an overlay. The overlay is made in Photoshop using Render Clouds and the Plastic Wrap filters. I overlayed this on my picture using 50% Fill and Linear Light blend mode.
I hid the picture, and saved the overlay as a PNG-8, hoping that the variable transparency would hold. It didn't. The question is, is there a way to control levels of transparencies in a GIF or PNG?
I already know you can edit the Color Table and select different colors, or shades as it were, but there doesn't seem to be any way of implementing 50% transparency. Or really anything outside of either it is or it isn't visible.
I have to import a set of png's from Photoshop to Edge Animate. The actual source file is a Photoshop psd but I cannot import the psd into Edge so I have to painstakingly export each layer as a png and there are over 40 layers. Is there a way to take a layered Photoshop file and turn those layers into transparent pngs so when they import to Edge or another app the layers would remain intact but just as png's?
View 2 Replies View RelatedW/ 6 & I think 7, in order to create a transparent png I would have to save the file (single layer PSD w/ transparancy) and open it up in Image Ready, or click on the image ready button to send the image over. Then I would have to select PNG and optimize it, and it would save the transparency.
If I would try to do this all within PS, the transparent areas are saved as white, so the image was not transparent.
Do I still have to do this w/ CS, or can you really save truley transparent pngs within Photoshop now?
I'd like to transition to .PNGs for my web graphics. I use a lot of transparent .GIFs for buttons and so forth. I know that .PNGs have transparency, but is there a way to do that in Photoshop with .PNGs?
View 4 Replies View RelatedI have these two PNG pics. On Firefox (and possibly other browsers), the transparency looks fine. However, the transparency doesn't work on IE :
So, what do I do? JPEG isn't transparent. GIF lowers the quality by 1000%.
I have a little X icon (all gray) against no background, and there aren't any other layers. It doesn't work if there are either..
View 4 Replies View Relatedcan someone explain how this image is done? i've tried using opacity levels, but the color doesn't look as vibrant.
View 5 Replies View RelatedI want to produce three positive transparency (C M Y) "films" that I can lay on top of each other over a white light for demonstration purposes (to simulate the behaviour of a slide film). Obviously each film has to be printed in its own colour (Y, M, C).
View 4 Replies View Relatedcan someone explain how this image is done? i've tried using opacity levels, but the color doesn't look as vibrant.
View 1 Replies View RelatedI'm using an Epson Perfection 4990 Photo scanner. I need to tell the scanner I am scanning a transparency but there appears to be no way to do this in Elements 11.
View 1 Replies View RelatedMy team and I have been having issues with generate image assets not saving png files correctly. Photoshop has been saving them with the png extension, but the file has a white background like a jpg. Has there been in recent updates that may be causing this?
View 2 Replies View RelatedI want to produce three positive transparency (C M Y) "films" that I can lay on top of each other over a white light for demonstration purposes (to simulate the behaviour of a slide film). Obviously each film has to be printed in its own colour (Y, M, C).
View 1 Replies View RelatedHow can I scan transparencies, colour negatives and B7W negatives into Elements 12?
View 7 Replies View RelatedWhen I save my .PSD files as .JPEGS the colour of the images change drastically.
View 1 Replies View RelatedI made a coloured square in PS. I saved it as a JPG. I saved it as a PNG. I saved it as a PSD. I dragged all three of these into InDesign. The JPG and the PSD were the same colour. The PNG was different. Now, before you all say that PNG's do funny things to colours, let me just say that the PNG was the ONLY one out of the three that matched a coloured square I made in InDesign with the same RGB values as what I made in PS. Both programs were using the same colour settings.
Just for interests sake, I tried the same experiment in Illustrator. Interestingly, I had no problems in Illie - all 3 (JPG, PNG and AI) files were the same colour as each other AND the same colour as the test square in InDesign.
I design graphics for Scrapbooking kits which I am beginning to sell and need both JPGS and PNGS (because of transparency) for these kits. AND I need the colour to be consistent. I also design in Illustrator (where there appeared to be no problems), but obviously there are some things that are simply not possible in Illustrator.
I have been doing so much research trying to figure this out. Either im missing something or its not possible.29571-saving-layers-seperate-files-one-persistent-layer
I ran across that post on this forum and that is exactly what i want to do (at end of post)Ive tried the LayerSaver jsx but it only allows selected layers and top layer and bottom background.
my bottom has to be transparent. I have an icon set that has a bottom group (that i can merge to layer) and a top group (that i can also merge to layer) and the middle contains my icons.
Every time I try to use VPE, the resulting mesh is fine (the dxf), but the PNGs do not match the drawn planes at all.
For example, I'll use a file from wikimedia. (all images re-compressed for the forum ) I draw the right wall, make sure it is blue, then pull the floor.Pull the floor and the left wallPull the back ground (hard to see in the compressed image, but it is there).Pull the ceiling.
The completed planes. Right wall was drawn, remaining were each pulled out the of the previous plane. All blue. Entire image is covered.Importing the VPE into After Effects CC. Note the wonky textures.Here are the actual textures (original PNGs compressed into JPEG for posting).
This is the background piece, note how the section of the image doesn't align at all with the plane I drew.I've successfully used the Vanishing Point filter extensively in previous versions of Photoshop. I'm currently using Photoshop CC on OSX 10.8.4 running on a 15" PowerBook Retina.
I've tried the following to no avail:differing JPEGsdrawing the floor firstdrawing the first surface counter-clockwise and clockwise : ) ensured all planes are bluedisabled graphics acceleration under prefererencescompleted uninstalled Photoshop and reinstalled with clean performance/preference settings (did not import any previous settings).removed the "Adobe Photoshop CC Settings" folder as well.Tried exporting a DXF, again mesh looks great, textures are wrong.
System Info below:
Adobe Photoshop Version: 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00) x64
Operating System: Mac OS 10.8.4
System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
[code]....
I'm having problems with transparencies and drop shadows when publishing to PDF. Look at the attached picture: the text beneath the transparent shape looks jagged; same with drop shadows. This happens only with PDF/X-3 format; I would choose Acrobat 6 or 8 format, if I could, but that is the file format the printer service wants.
Is there a way out?
I wanted to upgrade from PSP 8, which doesn't work well at all any more since I installed Win7 to the newest Corel's PSP x5.After downloading and installing the 30 day demo I went to view some of my saved PNG & PSD files which have transparencies, but PSP x5 will not display the transparencies, instead it turns their backgrounds into a solid white.
I'm still using GIMP 2 which has no problem showing my transparencies, why won't PSP x5 show them and what do I do I need to do to view my transparencies?
Illustrator CS6 exports to PNG with unwanted transparencies. I've done everything I can think of but some of the shapes in my Ai file with 100% opacity are still showing the layer under them in the PNG export file.
View 3 Replies View RelatedAt work I use Photoshop, but at home I have started using GIMP. One problem I constantly have is the size of pngs. How do you reduce the size of pngs?
I have 400KB png, when I save the same image at home in GIMP as jpg it becomes smaller, but if I save it as png it becomes about 2MB - this is huge compared to photoshop
If I use the save for web plugin, the results are the same for jpgs, but if I save as 24bit png the image suddenly becomes 2.5MB. Why are PNGs in GIMP so large?
PS: I use windows vista, in case this matters.
I'm trying to create images of pairs of cards from png images of a deck of playing cards, basically I would like to combine two cards into a single image, i.e. have the A clubs with the King clubs for AcKc (attached), I would like to do this for all starting hands if you're familiar with poker (AA,KK..72 etc)
Lastly, I would like to change the color of the diamonds and clubs suits from red to blue and black to green respectively, without affecting the black border.
Attached File(s) king_of_clubs2.png (256.97K)
Number of downloads: 7
I have a problem with Illustrator CS6: anytime I try to export file to PNG, it saves a file of exactly 102 kb and the file is essentially empty. Is it a bug in Illustrator.
View 3 Replies View RelatedI use Coral Draw X5 on win 7 64-bit.
I have trouble working with transparencies inside a symbol. It also does not work if it is power-clipped inside a symbol. The error message is as follows:
This item cannot be stored inside a Symbol. The item must be removed in order to be able to finish editing this symbol.
this same procedure works in Corel X4.
I am creating a design which uses an elliptical fill. When exported as a .pdf and opened in Illustrator, the fill is given the name "non-native art" and is rasterized. My question is this: if the print job were for the side of a van, could XDP be used to do this and retain a pure vector output?
View 6 Replies View RelatedWhen useing my old favorite graphic software MS Picture-It i often need to apply overall or border transparencies to many patches. Since im enjoying the pleasures of GIMPs select definitions which absolutely cause no distortions im often thinking - this be the only missing thing. Am i correct or do such functions like previewable halfways restoring of the previous look plus border fading indeed already exist in the new GIMP?
View 10 Replies View RelatedHow do I easily change all different transparency levels of one color to a new color with matching transparencies? I want the antialising pixels for parts of my logo to keep the same transparency, but change all pixels with the same color to a new color. Everything I have tried so far doesn't seem to work, and I must not have the recolor tool figured out. I'm loving Paint.Net, but a little frustrated right now.
View 2 Replies View Related