I am creating a design which uses an elliptical fill. When exported as a .pdf and opened in Illustrator, the fill is given the name "non-native art" and is rasterized. My question is this: if the print job were for the side of a van, could XDP be used to do this and retain a pure vector output?
View 6 Replies
can someone explain how this image is done? i've tried using opacity levels, but the color doesn't look as vibrant.
View 1 Replies View RelatedI am attempting to edit a scanned abstract drawing where many of the colors are similar, resulting in them printing as all the same shade of red. I am attempting to change some of the reds to have a greater degree of shading. I am aware that I can probably do this using masks and RGB tweaking; but it occurred to me that I can also use a drawn shape and color fill with transparency to change the shade. This worked very well; but it caused one problem I don't know how to solve.
The image I am editing is intended to be uploaded to a website named Zazzle that takes your artwork and puts it on their products. This includes anything from notecards to canvases, to clothing, to shoes, etc., etc. Customers browse the site to find products and images they like. I also have a free webpage on the site where I can promote the sale of these items with my artwork on them.
The image must be a high resolution preferably png file which can be resized greatly for the canvases or left as is for notecards and the like.
While experimenting with the size of my image, I discovered that the edits I performed stay the same size while the rest of the image increases. Is it possible to make the edited shapes part of the scanned image so they will increase and decrease with the rest of the image?
I often have trouble bending shapes with nice gradients, typically a tube on technical concept drawings
I'm using a workaround of adding lines on top of each other with gradually brighter colours feathered but it's not really elegant and there are issues at the end of the lines.
How would you this if I want to keep the nice gradients and the tube needs bending?
I have a problem with images and shadows over a white backgroung. When I send these images to print (in commercial press CMYK), the shadows doesn't show all the gradient from the white color smoothly, instead, it prints with rough edges. It seems that when they make the plates, the machine doesn't read the lighter tones and starts reading from certain amount of color. It has happened sometimes with gradients also. Is there any way to avoid that?
View 6 Replies View RelatedI use Xara Xtreme Pro 3, and when I open a pdf file for editing, the color gradients don't show up. They are definitely there in the pdf file (I can see them in Adobe Reader) but Xara doesn't seem to display them.
Let me know if I can upload images, pdfs, more info, etc
I have been working with Xara for two days now, and it's great! I am using the trial version of Xara Photo & Graphic Designer 9. I created a file with a couple of transparent shapes (love the transparency tool - so easy!), and it looked great. I exported to .pdf, and the transparent gradient was all gone. The shapes are there, but have no gradient whatsoever.
I also exported it as a .jpg and the gradients are present in the .jpg. In other words, the .xar file looks great and the .jpg looks great. Just the .pdf doesn't work.
I click the gradients panel and then the dropdown of gradients on the left side.
All I see is: White Black, Gold Dust, and Blue Sky.
I know AI has a ton more gradients premade than that so why aren't they in the list? How do I add more to that dropdown?
is it possible to make a specific color transparent on a gif or png?
View 7 Replies View RelatedI am switchin over from photoshop and would like to do the following
1) Select a color: I have a logo with a green and red text and would like to select only the green text. The logo is a flat file so I do not have access to the text-layers. (In Photoshop I would now use the "select color range" tool)
2) Keep the selection of the color active (as a selection)
3) Create a new overlay-layer and fill the selection with a blue color.
How would you do this in Xara Designer?
I have a small sublimation business whereby I print photo's onto small personalised gifts such as mugs, phone covers fridge magnets. I print out the images to fit the size of the gift i.e. a phone cover or mug the images are a specific size.
Often I want to print multiple items onto one page each with a customised size as the paper is expensive and I need to make the most of every sheet. I can't figure out how to do this in photoshop elements 12. I am using windows XP
I've had a simple lisp I've been using for years that suddenly disappeared. It required that you identify a block name, tag name, and the value that you want the tag to be. All of this is performed via command line, so it is scriptable. Since I lost it, I've been experimenting with -attedit. This command comes frustratingly close to what I'm looking for, except it only appends an existing tag, or replaces a specific string within the tag; I can't get it to replace the entire tag, regardless of its value.
1> Any lisp routine that does what I describe?
or
2> How to make -attedit replace a tag value without regard to what the value currently is (like a * wildcard)?
I am in the course of evaluating Xara, and it has a lot of good things going for it compared to Adobe, particularly in combining many of the features of ID and AI. The graduated color screening on objects is way better than AI.
However, I cannot find how to copy an object or text block and paste multiples at specific intervals. Both Pagemaker and InDesign have this feature, so I can't believe Xara overlooked it, as it is particularly useful when laying out say business cards 12 up on a sheet for printing. Yes, I have done a search on this forum and also studied Xara help files.
I have finished designing a flag using Xara which contains an EPS import in the bottom right hand corner.
I can print the XAR element of the design but it will not print the EPS element
I created an ad in color but might possibly be required to provide it in black and white also. However, The file contains an image that's in color. So I need to know if there is an option to print the file to PDF in black and white? I tried changed the settings many times to no avail. I'm using DP7.
View 5 Replies View RelatedI want to get some designs I've done printed, the design are pretty simple block colors and shapes, Xara Xtreme 5 is brilliant for doing these designs. However the T-Shirt printers (spreadshirt) want to files a vectors graphics. This is what they say on the site
Transforming objects into curves
Transform all design elements and text into curves.
This is possible with Corel Draw: highlight the part of the design you want to convert. Click on 'set up' - 'transform into curves'.; You may run into a few problems when converting complex pixel graphics into curves. Try to convert as few individual objects and colors as possible. Note: vector graphics for plot printing can have up to three colors per design.
Check the minimum size of the object
After you've converted to curves, you'll have to check every element of the design to make sure that it has a minimum size of 1.5 mm. One trick for checking this: create a small circle with a diameter of 1.5 mm and lay it over the smallest parts of the design. If the area is smaller than the circle, it's too small for plot printing.
Save image as vector graphic
Unfortunately, you cannot just open a pixel graphic into a vector program and save it in a vector format (.eps.) This is not enough. You have to manually make sure the pixel graphic has been converted into curves.
Can I just export as an .eps and it'll work, or do I need to convert to editable shapes then export?
I've included a URL to a screen grab that shows how the artwork falls off the desired background. And so effects what gets printed ... I think.
What is the normal way to cause the printed product to cut off at the desired edge?
In this case the blue noisy bkg is the exact size of what is supposed to get printed.
I used to use Xara Xtreme 4 and loved it. Since changing my computer to one with Windows 7 I have not been able to use Xara Xtreme.
Needed to print out an old Xara image today so downloaded and installed Xara Web Designer 7 as this seems to be the nearest I can get to the old Xara Xtreme that runs on my laptop.
However, I can't find any "Print" option. It's not under File, Ctrl P doesn't do anything, nothing under right clicking. I need to print something quickly and I've given up trying to find the Print option. where have they 'hidden' Print?
Also, am I correct in thinking Web Designer 7 is the nearest program with features to Xara Xtreme or are the features of Xara Xtreme loss forever to this new web site design program?
I export pngs almost exclusively from Xara. I have always opened them in PSP and changed the resolution to 118.50 (about 301dpi) so they are print ready.
I have to make over 21,000 arrows (sob) and having to open each and every one of them in PSP is not something I am looking forward to. There is a way to change the png export resolution to something more suited for printing.
This post is regarding using Designer Pro to edit print ready PDF's (with crop marks, colour bars etc) created using Photoshop and Illustrator. I can do the edits, but if I try and export the file it corrupts (colour values change, some text changes col)
The files are supplied to me by a designer and sometimes I need to do urgent changes myself before going to print. I have unticked the 'add printers marks' box to avoid a double set of marks and colour bars and have the fonts installed too.
What is the best way to convert a color photo to black and white for commercial printing.
View 9 Replies View RelatedIf I have a jpg or PSD file of a picture frame and I wanted to have the center be transparent how would I accomplish that. I have a program called PRO Show Producer that will let me put a picture in motion into the transparent window of a picture frame. I have a picture frame but the center is not transparent. I'm running Windows Vista.
View 9 Replies View RelatedI have two images, a picture and an overlay. The overlay is made in Photoshop using Render Clouds and the Plastic Wrap filters. I overlayed this on my picture using 50% Fill and Linear Light blend mode.
I hid the picture, and saved the overlay as a PNG-8, hoping that the variable transparency would hold. It didn't. The question is, is there a way to control levels of transparencies in a GIF or PNG?
I already know you can edit the Color Table and select different colors, or shades as it were, but there doesn't seem to be any way of implementing 50% transparency. Or really anything outside of either it is or it isn't visible.
What I want to know is if there is a way to make a hotkey or at all save specific options for specific tools. Let's say I'm using the 'Paintbrush, Opacity 70%, Hardness 075, Size 4.00' as my "standard outline tool". Can I some how save that preference (and any other tool such as "Specific Eraser Op. 100%, Hard. 100, Size 10.00) so that I can easily switch between "Ouline Brush" and "Specific Eraser" . Maybe to the 'f-buttons'
I'd like to be able to make maybe 5 specific tools:-Outline Brush
-Small Eraser
-Big Eraser
-Detailed Color brush
-Big Color Brush.
I have a little X icon (all gray) against no background, and there aren't any other layers. It doesn't work if there are either..
View 4 Replies View RelatedI'm having problems with transparencies and drop shadows when publishing to PDF. Look at the attached picture: the text beneath the transparent shape looks jagged; same with drop shadows. This happens only with PDF/X-3 format; I would choose Acrobat 6 or 8 format, if I could, but that is the file format the printer service wants.
Is there a way out?
I wanted to upgrade from PSP 8, which doesn't work well at all any more since I installed Win7 to the newest Corel's PSP x5.After downloading and installing the 30 day demo I went to view some of my saved PNG & PSD files which have transparencies, but PSP x5 will not display the transparencies, instead it turns their backgrounds into a solid white.
I'm still using GIMP 2 which has no problem showing my transparencies, why won't PSP x5 show them and what do I do I need to do to view my transparencies?
can someone explain how this image is done? i've tried using opacity levels, but the color doesn't look as vibrant.
View 5 Replies View RelatedI want to produce three positive transparency (C M Y) "films" that I can lay on top of each other over a white light for demonstration purposes (to simulate the behaviour of a slide film). Obviously each film has to be printed in its own colour (Y, M, C).
View 4 Replies View RelatedI need to have transparencies in a .png file
I am trying to edit a pic for an avatar and need them to have transparencies (i.e. no white space around the pic) and dont seem to be able to do it in PS Can it actually be done or do it have to go with gifs ??
Illustrator CS6 exports to PNG with unwanted transparencies. I've done everything I can think of but some of the shapes in my Ai file with 100% opacity are still showing the layer under them in the PNG export file.
View 3 Replies View Related
