Every drawing I created using LT 2009 opens now with "Open Drawings - Errors Found" window telling me the drawing has xxx numbe of errors and asking me whether to continue or close and recover. Why is it doing this?
View 6 Replies
I can't open a drawing I saved yesterday afternoon. I always get a fatal error after reaching 98%. When i try doing recovery I get a message that is something like a program failure.Is there any way to open that drawing?
View 9 Replies View RelatedAutocad 2012 was working fine until a week ago when it started taking a long time to open drawings--even search for drawings on our network. It also takes at least 30 seconds to save files, where it used to take 5 seconds at most.
I found the AutoCad 2012 and AutoCad LT 2012 SP1 Ribbon Hotfix, which sounded like my problem, but it is for Product Version F.107.0.0 and I have Product Version F.51.0.0.
Every time I try to open a drawing I get the pop up stating that it can't be opened because of incomplete or corrupt information and needs to be recovered, but when I recover the file the audit doesn't find any errors. I can open the file, but this is kind of annoying to have to do this each time. I've purged the drawing, ran an audit, and verified that there aren't any problematic blocks or anything like that.
View 5 Replies View RelatedWhen I click the "Setup.exe" It brings up a "Initializing Adobe Photoshop CS3" When that is done, it brings up Adobe Photoshop, and I get an error.
It says exactly.
"Critical Errors were found in setup
Session has dependencies that cannot be satisfied.
Please see the setup log for details."
When Running Setup.exe it manages to get through it then it opens up a web page called Adobe Setup and then an error message occurs saying "Critical Errors were found in Setup.
If you know how to fix this I Would much appreciate it as I have been wanting to do some designing for a long time.
I m receiving the following error on all projects whether they be existing or newly created. I am getting this error on Revit 2013 and Revit 2014. To reproduce all I have to do is try to delete ANY object in the model. "No circuit errors found".
View 1 Replies View RelatedI have an error that started appearing in my VBA programs since we upgraded to AutoCAD 2012. This problem never occured in our previous releases. The program is supposed to loop through all entities in paperspace and check for entities that are a acBlockReference object.
Below is a simplified version of my program. I get an Element Not Found error on the line noted. Again, this has never happened in any of our previous versions of AutoCAD. Just started with 2012.
Sub Test
Dim blkref As AcadBlockReference
Dim entry As Variant
For Each entry In ThisDrawing.PaperSpace
If entry.EntityType = acBlockReference Then ' <-This is where the Element Not Found error occurs
msgbox entry.name
endif
next
end sub
I'm trying to install AutoCad Map 3D 2012 on a Windows 7 x64 machine. The user was
Successfully running the trial version.
Here a couple of the errors I get.
Could not write value Assembly to key softwareClassesCLSID{01255oCB-1BD0-42d5-BAC3-6567BFA308CC}InprocServer3217.0.54.0. Verify that you have sufficient access to that key, or contact your support personnel.
I have also attached a couple of the errors.
The user is a local admin of the machine, I have tried installing as the local administrator as well. I have tried to change the onwer in the registry and all give me the same error.
// Error: setParent: Object 'renderView' not found. //
View 1 Replies View RelatedIs it possible to programatically suppress dialogs or warnings and errors when I open Inventor?
View 1 Replies View RelatedWe are using AutoCAD 2011 and AutoCAD 2012 on the same drawings. It is slowing the drawings down in AutoCAD 2011. There is at least one person that only has AutoCAD 2012 on their machine.
View 2 Replies View RelatedI'm having an issue with my cad files that were done with Civil 3D 2012. When we made the jump to Civil 3D 2014 all my drawings seem to be corrupt. Now I have pipe networks in my base file. I have tired recovering and recoverall but no luck. I can send the CAD file.
View 1 Replies View RelatedI downloaded Photoshop CC the other day, and it worked fine. Today when I try and open Photoshop I am getting a multitude of errors about ‘FastCore Routines Module’, ‘MMXCore Routines module’, ‘Multiprocessor Support module’, and then that it could not ‘initialise Photoshop the internal file signature is incorrect’.
View 2 Replies View RelatedURL....I have a jpg file that I needed to apply some transparency to and saved it as a png file. I now want to delete the jpg file but it's being referenced in several drawings, but I don't know which ones. Is there a way to reverse the function of Reference Manager, ie find all the drawing files that reference my jpg file?
View 2 Replies View RelatedWe have used Inventor 2010 with PSP 2011.
- Recently we have upgrade to Inventor 2012.
- Installed pspro_cad_fp_10.0.39.3 update for PSP Server and for PSP Clients.
And now, some drawings we can not open in Inventor 2012. Inventor crashes!
But some drawings we are lucky to be able to open and work with.
Drawings have the same template.
If the drawing is locked (read only) then inventor 2012 can open it without a crash.
If I drag&drop drawing out from PSP onto my Desktop, Inventor 2012 can open drawing without problems.
So we are not able to work with some drawings in Inventor 2012 and PSP 2011.
As the first and quick (and 100%) solution - rollback to Inventor 2010 can cost us about 5 man-days of work. (Because we have done some work in Inventor 2012 allready and will not be able to work with this in Inventor 2010)
I have a set of drawings that are dwg's that have a dwf referenced/attached in. When I try to print, I get the following error.
FATAL ERROR: Unhandled Access Violation reading0x2573d000 Exception At 4f6c133fh (the numbers differ between drawings) I can plot all other CAD files with no problems, just this set.
The company I am working for has the old 2000 version of AutoCad. They send me drawings with blocks and attributes. But when I start working on them the system will lock up and not let me do anything else. I can maybe get two or three commands in then it will lock up. It doesn't even let me send a C.E.R. (customer error report) I have downloaded all of the service packs and the hot fixes but the problem persists. I don't where to go from here. My co worker thinks it may be a memory problem but I doubt it.
View 2 Replies View RelatedI have run CS4 on my windows Vista pc for years without a problem. Yesterday I downloaded DNG converter 7.2 as I have purchased a Fuji Xpro and needed to be able to process the Raw files - my version of ACR is not compatible. Today I tried to look at an old image processed from a year ago in CS4 and got the error message:
"The specified module could not be found C:programfilescommonfilesAdobeAdobeVersionCueCS4Client4.0.1Ver sionCue.DLL"
I have tried to open many different images from Bridge into photoshop and from the photoshop file menu - photoshop opens with the image, then this error comes up, I click ok and photoshop closes.
I have tried and tried again but there is something preventing me from opening PSDs and JPGs. Along with that, when I first start up the program, I have about a thousand errors all having something to do with Plugin.dll.
View 1 Replies View Relatedabout 3 days ago for some reason my cad is really slow when i have two drawings open at the same time. it lags when i am panning or zooming.
it just started randomly and the computer i am using is new and started using it about 6 months ago and it has been fine since i got it except for the past few days.
it doesn't matter what drawing file is open it lags. RAM is alot (8gigs) again this just started happening randomly. everything else is fine
i am working on AUTOCAD LT 2014
I tried the following method to save all drawing currently open. It always fire fill access arror, whereas AutoCAD can save the file wihthout any issue. Here I am checking for drawings that not even saved once and ask the user to take action for those files.
try
{
DocumentCollection docs = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager;
foreach (Document doc in docs)
{
string dname = doc.Name;
string s = doc.Name.Substring(doc.Name.LastIndexOf('\') + 1);
[code]....
I'm trying to add a block with an attribute to a drawing. The command works if there is only one drawing open, but when there are other open drawings then the block doesn't appear. Strangely if I select the block in the block editor and then close the block editor the block suddenly appears. Do you know what is causing the block to not appear when other drawings are open?
I included the code below. "s1" works but "s2" has the strange behavior of the block not being visible.
[CommandMethod("s1")]
public void AddBlockWithAttributeToDestination_WithNoOtherDrawingsOpen() {
var attributeValue = "1234";
var destination = Application.DocumentManager.MdiActiveDocument;
using (var transaction = destination.TransactionManager.StartTransaction()) {
addBlock(transaction, destination.Database, attributeValue);
transaction.Commit();
[code]....
I'm running 2013 C3D and have a quirk that my drawings zoom out when I first open the file. I'm not even sure what they are zooming out to as it is not 'Extents'.
View 9 Replies View RelatedFor some reason, one of our PC's running MEP 2012 has suddenly started to only open drawings in read-only mode. The same drawings will open just fine on other PC's so they / their folders are not set to read-only in windows. The user also has the exact same access rights on the server as the others.
The strangest thing about this is the following warning box that appears on screen. see attached.
For some reason, the alert message which displays the full path of the dwg in question, has it's path modified with a date and time stamp prefixed with a '@' symbol. Needless to say the folder '@GMT-2012.07.17-11.00.04' does not exist. In 18 years of playing with AutoCAD I've never seen this one before.
I usually open several drawing and use"drag and drop".
But something has happened.
Now, I can only open one drawing at the time. When I try to open the second drawing, the program close down the first.
What have I done ? and what shell I do ?
But, I've lost the ability to open drawings with the traditional "tree" type search.... Something like Windows Explorer. Just before this happened, I had blown up a drawing by, apparently, importing one too many iges files. Got a message that Autocad had an error and was shutting down. Now, when I hit file/open, I get nothing but the command line asking me to enter the drawing path.
View 5 Replies View RelatedCurrently when I open up multiple drawings (opening them up one at a time) they all appear in the same window (one instance) of AutoCAD.
I want each drawing to open in separate instances so I can view them on separate monitors (and close one without being asked to close them all).
I have tried changing the SDI system variable from 0 and 1 (and vise-versa)
I have tried changing the windows default program from AutoCAD Application to AutoCAD Launcher (and vise-versa)
I have set the TASKBAR system variable at both 0 and 1 (and vise-versa)
Windows 7
AutoCAD LT 2012
I was trying to retrieve a list of the currently open drawings before running a batch script in VB .Net 2008 so that the program can check the selected file listto update against whats open already to make sure that the file isnt read only.
View 2 Replies View RelatedIt seems that once my newly purchased autocad lt. 13 opens up a drawing created by an other co-worker in autocad Lt. 11, it automaticly converts to 13 and now the person using 11 can no longer open the file. what I should do?
View 3 Replies View RelatedI cannot get this feature of 2013 to work for me. When I grab a selected item and drag it to the new drawing window, I get at round circle with a line through it or sometimes I get a command that says invalid.
View 3 Replies View Related
