AutoCad :: How To Allow Split Screen Of Two Different Drawings
Apr 9, 2011
I have autocad 2000i and can't open two drawings on the same screen. The book I am reading currently is autocad 2002: no experience required. In the book it as to open the drawing that I am currently working on and a new drawing after, then choose window>tile vertically. That doesn't seem to work for me. Also, when I click on window ther is only the active file on list instead of two or others that I have previously opened. I think I am stuck. Maybe there is something to change in the options for the allowance of more than one file to be on the list so then it would become possible to allow a split screen of two different drawings.
FIGUERED IT OUT! tool>options>system>single-drawing compatability unchecked.
View 3 Replies
ADVERTISEMENT
Oct 4, 2012
I am working in paper space having more than six viewports which are arranged vertically. When I am checking for alignment, I need to pan more. To avoid this, is it possible to split the screen for the same file while working in paper space?
View 9 Replies
View Related
Aug 27, 2013
When I open Civil 3D 2014, my prospector will be off, If I open it, my screen splits as if it were two vertical viewports. Prospector appears in only the top one, which does not respond.
Here's a screen cap
I've been opening old drawings that don't seem to have this problem, and then creating new drawings. Is it possible that this has something to do with a dual monitor setup?
View 9 Replies
View Related
Apr 27, 2013
split screen.cad tutor..jpg
In AC LT 12 can you split the screen and work on one side independently of the other without it also showing up on the opposite side?
View 4 Replies
View Related
Sep 19, 2012
I just loaded Gimp 2.8 from 'ppa:otto-kesselgulasch/gimp' with the idea of using the 'all-in-one' new arrangement. I am using Mint 13 Maya and the new gimp interface is not yet in the repository.
That said, having opened the 'new' gimp I see the docks arrangement is a bit different. Whereas there used to be two docks one on either side of the drawing area, now the right hand dock is split screen.
The problem is that just for say the colour wheel it uses loads of screen space. I know I can toggle between 'all-in-one' and multi-mode but they both have a split screen for the docks on the right.
I don't see any obvious way to move the colour wheel dock back to where it has been under the toolbox and brushes docks.
Maybe this is a fixed arrangement in 2.8, if so I will have to go back to my Mint 13 native version.
View 5 Replies
View Related
Feb 12, 2013
how you create a flickering text effect as seen in the video :30 in. Also I would like to know how to get a split screen like they do in 1:07. URL...
View 4 Replies
View Related
Apr 1, 2013
i'm trying to link my edl with the correct clips. So when i got a green check icon , indicating that smoke have found the matched clip. But before i link it i just want to make sure that it's the correct clip. So in the bin, the clip is highligted and i double click it to open it up in the viewer. The problem the viewer split control is disabled so i can't do split screen to match that clip with the guide/offline (in the edl sequence i've inserted the guide movie). all i can see i have to link it first then go back to timeline and now i can view in split screen.
View 1 Replies
View Related
Mar 22, 2013
How to split my screen so i can merge a photo with a template. i am used to using photoshop elements 7 and now have #11.
View 1 Replies
View Related
Feb 2, 2007
When I open a drawing, if I have other drawings open, the drawing I am opening does not come up maximized. I have to drag the edge up to fill the screen.
Is there a setting for having all drawings open up maximized? The first drawing I open always comes up maximized.
View 3 Replies
View Related
Oct 10, 2013
I have been using various versions of VideoStudio for years to successfully edit videos for courtroom presentations, but this is the first time I have been asked to create a video using two videos playing simultaneously or a side by side image. The first video is a surveillance camera video of a traffic accident, and the second video is a video of a reconstruction of the accident recorded later on the same surveillance system. Even though we can play the videos separately in court, the prosecutor is asking whether or not there is a way to combine both videos into one final product, thereby showing the actual accident side by side with the recreation.
View 2 Replies
View Related
Sep 2, 2013
I made all my polygons with the same technique but somehow interactive polygon split tool does not split all polygons... I attached a file with which I have problem. Split tool just "disappears" after submitting changes...
View 1 Replies
View Related
Jun 3, 2013
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
View 4 Replies
View Related
Dec 28, 2012
I'm using ACAD LT 2008.
When i try to copy paste some drawing entities from a heavy drawing file to any other file, the program blocks and says 'not responding', endlessly. So i always have to shutdown the program. I experience the same problem using the designcenter: when I try to copy a layout into another drawing, my computer gets stuck.
Another annoying problem with these files is that they are so heavy, while in fact they shouldn't be. I tried the aectoacad file command. In result the file id half as big, but after I open it and save it, again is the original size.
View 5 Replies
View Related
Apr 2, 2013
Every now and then I go back and try to use publish to speed up printing but I always go back to plotting one by one.
I work in a housing construction office and I have 10 separate drawings side by side in model space for house plans that I need plot separate to give to certain people. My problem isn't that I can't publish them separately its that I can't save them over existing pdf's individually predetermined.
Q1. do i just have to go through and change every layout name before or after i publish?
Q2. how do i change the output publish location?
Q3. can each layout be saved to a different existing pdf and remember it?
Q3. can i save these setting across to a new drawing?
View 5 Replies
View Related
Nov 10, 2011
Model Space Screen Darkens and am unable to see screen
View 2 Replies
View Related
Nov 14, 2012
How to split polygon?I am using "bpoly" function when I split the polygon but It's inconvenient. Any better way to split polygons?I go over the functions through help desk.
View 5 Replies
View Related
Mar 25, 2012
I have a very large assembly drawing. The BOM is three times the height of my D size format. How do you split the BOM to break it into 2 or 3 columns instead of one large one that does not fit on the paper?
View 6 Replies
View Related
Nov 7, 2013
I have a part I have drawn in inventor. It is saved as an ".ipt" file.
I would like to split this part into two seperate Ipt files so i can assemble it a different way.
For example,
the part i wish to design is an alternate keying of the one i just drew-
meaning that a solid of the part is rotated 60 degrees in this case.
Is it possible to do this with inventor commands?
View 4 Replies
View Related
Apr 9, 2012
I modified a box build in Inventor in Fusion and then imported it back into Inventor as a bowl. I am trying to split the bowl in half and create an assembly drawing which I can submit. When I try to split the bowl I get and error message: "The attempted operation did not successfully complete due to unforseen problems. Try with different inputs or outputs." I've attached the file in case you want to try yourself.
View 2 Replies
View Related
Jun 26, 2012
I want to apply a pressure load on portion of a surface in my INVENTOR solid model. My problem is that i cannot split the surface in inventor easily. I did it my creating a separate surface with an offset that i reduced to almost zero.
View 4 Replies
View Related
Jan 29, 2010
I have an alignment that I want to break at a point and delete the rest of the alignment after this same point. I used the 'delete sub- entity' icon on the Alignment Geometry toolbar. How can I successfully split the alignment?
View 3 Replies
View Related
Feb 11, 2012
I want to split cell (from one cell to two cell) in table.Because I want to put separate text in these cell as shown in pdf.
Attached pdf file.
View 1 Replies
View Related
Apr 27, 2012
Is there a way to take one hatch and split it into 2?
View 2 Replies
View Related
Oct 11, 2011
I 'd like to keep the old Revision table rows available , but off the sheet rather than delete all the rows & start from , let's say, Rev 10.Is this possible in 2012?
Inventor Suite 2013 Ultimate
View 6 Replies
View Related
Jul 21, 2011
I'm trying to split a polyline that have some intersection points at its intersection points. So, if a polyline have two self intersection point, then it will become three different polyline. I attached an example of a polyline that I want to split.
View 2 Replies
View Related
Jul 21, 2011
I'm trying to split a polyline that have some intersection points at its intersection points. So, if a polyline have two self intersection point, then it will become three different polyline. I attach the example of a polyline that I want to split. I wonder, does the get split curve method ?
View 3 Replies
View Related
Sep 19, 2013
I'm trying to model plug welds in IV2014. I've read all the posts here that say that I need to split the hole faces. Problem is, the split face command doesn't seem to appear in weldments. I want to make the holes to be plugged as a weld preparation. Am I just missing something here, or is IV so backward that a common weld can only be achieved when not working with a weldment?
Inventor Pro 2014 SP1
HP Z400 Workstation
Intel Xeon W3565 @ 3.20GHz
12Gb RAM
Win 7 64 Pro SP1
Spacepilot Pro v3.17.4
View 1 Replies
View Related
Mar 14, 2013
I have been working for an hour trying to add this split to this part. I have an extruded surface (ExtrusionSrf10) that I need to use as the parting line. When I try this all I get is a "Create parting line failed.....Errors occurred during update".
I have done this many times on other parts, this one is being a pain. I need the split to have two solids when its done. The reason that I want this is so I can sculpt out a portion of this block.
The file is about 15mb. Here is a link to it.
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 3.60ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1.1 (update1)
Vault Basic 2013
View 6 Replies
View Related
Feb 7, 2013
is there a command or workflow to split all intersecting surfaces? currently we build surface models and split manually or open in autocad, explode, overkill, breakall, then export the lines for rebuilding in an FE package.
Ideally we would like to export straight from inventor with one hit i would like to do the 5 splits below the EOP marker automatically
View 9 Replies
View Related
Oct 9, 2013
I have downloaded a stp file from a supplier, it has a main body and a couple of lids. I want to remove the lids so it shows what is inside but I can find a way of selecting the lid elements. Is this even possable with a stp file?
I have tried in Inventor and 3DS Max too with no luck.
View 2 Replies
View Related
Feb 5, 2013
is there a command or workflow to split all intersecting surfaces? currently we build surface models and split manually or open in autocad, explode, overkill, breakall, then export the lines for rebuilding in an FE package.
we would like to export straight from inventor with one hit
View 4 Replies
View Related
