AutoCAD LT :: Publish Drawings To Overwrite Existing PDF Drawings
Apr 2, 2013
Every now and then I go back and try to use publish to speed up printing but I always go back to plotting one by one.
I work in a housing construction office and I have 10 separate drawings side by side in model space for house plans that I need plot separate to give to certain people. My problem isn't that I can't publish them separately its that I can't save them over existing pdf's individually predetermined.
Q1. do i just have to go through and change every layout name before or after i publish?
Q2. how do i change the output publish location?
Q3. can each layout be saved to a different existing pdf and remember it?
Q3. can i save these setting across to a new drawing?
View 5 Replies
ADVERTISEMENT
Aug 21, 2013
Im using AutoCAD 2012 and am trying to publish a set of drawings to PDF but when i do it cuts off some of my title block, but when I plot to PDF the drawing is fine.
View 1 Replies
View Related
Jul 5, 2011
I'm weaning myself off of Adobe's PDFMaker and learning how to publish.
I've got everything working but I'm prompted at an Adobe prompt (Save PDF File As...) for every sheet
which is overwhelming when I have multiple drawings with multiple sheets.
I don't know how (or if it is possible) to make it just save to the default name and continue onto the next one.
View 3 Replies
View Related
Sep 11, 2012
We just recently updated to AutoCAD 2013 from 2011. We use Publish to create PDF files that we send to our customers. When I tried to create a PDF in 2013 some of my drawings are oriented landscape while others are oriented portrait. I went back to 2011 and used the same drawings and it created them all oriented landscape.
Am I missing a setting somewhere in 2013?
View 1 Replies
View Related
Dec 22, 2011
I am trying to publish a set of four drawings to a Canon ipf750. I want to make two collated sets. So far I can't get any plot at all.
View 6 Replies
View Related
Jun 20, 2012
I'd like to batch plot 50 drawings, all of which have the same title block in the same position. This is easy with the PUBLISH command, but I'd like to be able to add a "stamp" of the customer logo to these drawings, which I have as a block in a separate file. Basically I want to easily be able to plot the same drawings for different customers, the only difference being the customer logo. Is this possible?
View 1 Replies
View Related
Sep 20, 2011
I don't remember ever using this checkbox on the Publish dialog box but today i want to and i can't figure out how to make it work. The help file ~seems~ to say that if i select this, the contents of all open documents (layouts and/or model space) are automatically loaded.... but they don't.
I know i can pick the Add Sheets button and manually select all the drawings i have open but doesn't that defeat the purpose of this checkbox?
View 4 Replies
View Related
Oct 23, 2013
When I am working on several drawngs at the same time, I use the Publish command to plot them as a group. However to save the settings as a DSD file for future use, every open file needs to be saved. Why is this? Is there a way to disable that requirement?
There is no reason I can think of besides "by design" for this. The DSD file is only a list of drawings and their plot settings and is not dpendent in any way I can think of, to whether or not one its drawings is open and not saved.
View 7 Replies
View Related
Jul 23, 2013
I've recently (this morning) come into the issue of the old plot printers being saved in CAD files. I've found a number of tutorials online about adding new pages, and setting the default plotter to "none" via DWGTruView, but these are just shy of what I'm looking for.
Is there any way to tell AutoCad 2013 that if the current/default plotter is "None" to set it to a certain printer? I have about a thousand CAD files that need this change made on them, so obviously a more automated approach would be greatly appriciated. Currently the entire set of them has has their Plotters set to "None", and a custom Page Setup configured.
View 5 Replies
View Related
Jun 11, 2012
For new drawings, is there a way to program Autocad to always load Xrefs relative? We pretty much use xrefs everywhere, and it seems like it would save a lot of time if I didn't have to open the External References and change each xref to relative.
Also, if you have an existing drawing and need to change the xref from absolute to relative path, is there a way to have it automatically do that? I'm assuming there isn't, but thought I'd ask.
View 5 Replies
View Related
Jul 10, 2012
I have a problem with my autocad. The administrator started me out on AutoCAD 2012 global.
The problem existed then so. Now he has me on AutoCAD 2012 Imperial . The problem still exists.
When I open an existing drawing that I have never opened with my version of Autocad. It opens the drawing in Metric units. I do not want Metric units. I would like it in Imperial units. Every time I open an existing drawing, I have to change the units to Architectural.
View 4 Replies
View Related
Apr 24, 2012
I'm attempting to create a sheet set from existing drawings, but when I point the "New Sheet Set Wizard" to the folder containing my 8 or so drawings (with 24 or so associated layouts), only 2 drawings appear with 6 associated layouts for import. The other layouts don't even show up as being part of another sheet set. How do I get the New Sheet Set Wizard to "see" the layouts?
View 4 Replies
View Related
Dec 28, 2012
I'm using ACAD LT 2008.
When i try to copy paste some drawing entities from a heavy drawing file to any other file, the program blocks and says 'not responding', endlessly. So i always have to shutdown the program. I experience the same problem using the designcenter: when I try to copy a layout into another drawing, my computer gets stuck.
Another annoying problem with these files is that they are so heavy, while in fact they shouldn't be. I tried the aectoacad file command. In result the file id half as big, but after I open it and save it, again is the original size.
View 5 Replies
View Related
Jan 23, 2013
I have a problem with Dimension association to any existing object in my drawings. If i draw anything new in the same drawing this problem does not occur. The leaders are also associating themselevs to these objects.
When i select a line, no grips appear even though if i draw a new line they do.
-I have tried to use DIMDISASSOCIATE the dimensions from the objsect to no avail.
-I have tried changing the DIMASSOC variable but this didnt work.
-I have tried exporting the objects to new files but still the same problem, only with the objects from this drawing.
It seems to have made every object associative. The only thing i can think that caused this was i pasted in a drawing from a pre 2002 Autocad version.
View 9 Replies
View Related
Jul 26, 2010
I've created a new sheet set with some existing drawing files. These files have several layout tabs in each drawing. The Sheet Set Manager (SSM) seems to import the layout tabs in random order, not in the order they appear on the drawing, nor in alphabetical or numerical order. In addition, the SSM imports and numbers all of my drawings in reverse order. Any system variable setting, or some other property setting somewhere that will change this back to ascending order?
View 7 Replies
View Related
Aug 31, 2011
In ACA2012, we cannot use the Publish command to overwrite an existing DWF file of same name, for instance you publish a set, then need to re-publish and overwrite the earlier version. We get an error message that the DWF is currently open in another program...when it clearly is not open anywhere and Design Review is closed. We have several servers running different versions of microsoft server, but the results are the same to any of them.
We do NOT get an error message when publishing/overwriting to the C: drive, only a network path. Also, if we use the Print command instead of Publish, well it only does the current page but it DOES allow the networked DWF to be overwritten.
I am puzzled by what could be the difference in that Publish will not overwrite a networked DWF file yet Print will?
This has never happened to us in previous versions of ACA or Design Review.
View 1 Replies
View Related
Aug 17, 2012
When going to Output and Export to PDF, you are unable to overwrite an existing PDF, you need first to delete the file.
View 4 Replies
View Related
Jun 21, 2013
I need to twick my lisp routine (attached) to run it without asking.This lisp asks if I want to "Update" or/and "Import," while I have a source dwg. and I want to: (Update and Import).
so how to remove asking and just run the command? I need that routine to assing to a button in OpenDCL project (I think I know how to do that thogh),
View 4 Replies
View Related
Oct 2, 2012
Presently if I insert a block into my drawing - and a block with the same name exists - the newly inserted block takes on the definition which exists in the receiving drawing . How do I reverse this i.e. I want to be able to overwrite the existing block definition by inserting the new wblock version.
View 9 Replies
View Related
Jan 7, 2014
How to overwrite an existing watermark. For instance, let's say I have a watermark called "website" with opacity of 50.
If I want to change that opacity to 60, I go to Lightroom->edit watermarks (or pick it straight from the export menu), select that watermark, and change the opacity to 60. Now I have an option to save the watermark. I don't want it to be a new one, I just want it to overwrite the existing watermark with the name "website". But when I type that name in, it says that's already in use. So now I have "website 2", "website 3", "website 4", etc which are all the same watermark with small changes, because it wouldn't let me overwrite any of them when I made a change.
View 2 Replies
View Related
Aug 30, 2013
I have created an action script where I change the color of the objects in a photo and then have the action automatically save for web as a PNG-24 image. My issue is that the save for web continually overwrites the existing file at that location. Is there anyway to prevent this from happening?
View 7 Replies
View Related
Jun 10, 2011
Basically I got a process which is quite long , let's say 30 seconds.
I want put a counter at command line showing to
user how many objects has been processed so far. But I don't want to use New Line Feed to change the line and keep each new number at same line and same location of command line.
View 2 Replies
View Related
Aug 25, 2012
I have a CAD Drawing in 2010 format. I printed the same drawing from two different types of printer. One from HP Officejet K7108 printer and another from HP Officejet 7000 Wide Format Printer - E809a. But the scale of both drawings are not same.
View 9 Replies
View Related
Jun 12, 2012
I am having a problem with Autocad12 I am using at a friends office: we both can open, edit, and save the same drawing. This is a real problem as you can imagine. We are running Windows 7 and are using DROPBOX for file storage. DWL are being created but for some reason they are not being used. On the otherhand if I try to open a file I created I do actually get locked out - just not from the other computer.
Just did a test - when I log in directly to the hard drive instead of the network it locks me out if I attempt to load it. If I login through DROPBOX it does not.
how I can have autocad recognize the lock files in DROPBOX folders?
View 0 Replies
View Related
Aug 11, 2012
I am new to autocad, i wanted to know if i can convert 2d drawings to 3d ?. I work in the aluminum openings industry making doors and windows, i have all my aluminum profiles drawing in 2d.dwg and i want to convert it to a 3d model and then extrude it for a certain length so that it look like an aluminum profiles bars ?
View 7 Replies
View Related
Jan 15, 2012
I draw several different drawings in the same dwg file - just offset from each other in the XY-plane.
I want to bring these together on top of each other to form the complete picture, but I'm not sure how to accomplish this in an easy way. If it was a one time thing I would just use the Move command, but the goal is also for the combined picture to be updated as the separate drawings are changed - not realtime - but maybe in some x-ref kinda way.
The whole thing would be easy if the separate drawings were also separate files, but as they are not I'm not sure how to solve it...
View 8 Replies
View Related
Jul 3, 2012
I'm currently running AutoCAD LT 2013, and I've been asked to compare two dwg files; one has been drawn using LT 2013 and the other has been drawn using an older version of the software.
Is there any way or any plug that can be used in LT 13 to compare the two drawings?
I've looked online and the only program i can find is Furix but that doesnt allow for usage on the LT version of autoCAD.
View 9 Replies
View Related
Dec 1, 2011
I worked in a drawing(#1) a few weeks ago and since then have copy pasted the drawings to be scaled at 1 1/2" into another drawing(#2) and have since been only working in this drawing(#2).
In the original drawing(#1), I was able to scale my drawings at 1 1/2" without any problems but in my second drawing(#2), when I try to scale drawings at 1 1/2" all of my annotative bubbles get ridiculously small.
Once having discovered this, I copy pasted my second drawing'(#2) components into a 'Copy' of my original drawing(#1), thinking that my second drawing(#2) file might have been contaminated, but with no luck because I could see that within the Same viewport scaled at 1 1/2" the original drawing(#1) was scaled properly but the second drawing'(#2) symbols became very small.
I am stuck.
View 1 Replies
View Related
Nov 4, 2011
I have a huge site plan and almost all the layers are at different Z-axis values...I have read up the previuos threads on flattening and tried out the different lisps. While some lines are working...others are not changing and I cant proceed with such a messed up file....is there any other way out of this?..
View 9 Replies
View Related
Aug 12, 2011
My friend is a qualified architect that has a limited knowledge of Autocad. He has been able to complete the drawings. He is using Autocad 3.3 and is having trouble placing text into his drawings and sizing it. How to achieve this or point me specifically to a tutorial that addresses this. I am aware it probably is a language issue and I don't understand the comand prompts and process.
View 6 Replies
View Related
Aug 29, 2012
I work with autocad 2011 and my problem is the following.
When my 3D vieuwport is properly set in my layout page. I try to plot my layout. when i've compledet my plotsettings I first check out that everyting is ok. and evrything looks great. but when I plot everything is plotted exept the 3D drawing. althoug the 3d drawing is shown on the plot preview. (look at pdf's to see what I mean).
Actual-Plot_3D.pdf
Plot-preview_3D.pdf
View 9 Replies
View Related
