AutoCad :: 3D Drawings Won't Plot
Aug 29, 2012
I work with autocad 2011 and my problem is the following.
When my 3D vieuwport is properly set in my layout page. I try to plot my layout. when i've compledet my plotsettings I first check out that everyting is ok. and evrything looks great. but when I plot everything is plotted exept the 3D drawing. althoug the 3d drawing is shown on the plot preview. (look at pdf's to see what I mean).
Actual-Plot_3D.pdf
Plot-preview_3D.pdf
View 9 Replies
ADVERTISEMENT
May 25, 2011
So I have the educational version of ACAD 2012 and this is my first time using that version. My model is done and I formatted my layout with a border and the model to scale in the viewport. When I go to plot to PDF, all I see is the border. I've tried fiddling with colors and viewports but neither of those did anything.
View 3 Replies
View Related
Aug 1, 2013
I am trying to write some VBA code to print several drawings present in a folder.
I am not a VBA expert. I wrote some little macros in excel but it is the first one in Autocad.
I have a small code that opens a drawing, counts it, closes it and then loops for other drawings.
I have a code that print a drawing by defining some printing parameters.
Separately, both work. But when I call the second one into the loop, I get a error:
"Run-time error '-2147418111 (800100001)':
Automation error
Call was rejected by callee."
I'm using Windows 7 and Autocad 2012.
See my code below:
Option Explicit
Dim filename As String
Dim filepath As String
Dim full_filename As String
Dim i As Integer
Sub print_trial()
[Code] ......
View 2 Replies
View Related
Apr 30, 2013
I'm trying to plot my drawings and have all my line weights be the same in the final plot so that no line is more bold than another. I do custom home designs and am now adding in additional information that uses different colors for appliances, plumbing, etc.
I'm using the standard red, cyan, magenta, green, 252 gray scale colors, however, when I plot, all of the lines except red are thick and make the objects entirely too bold for my purposes. How do I fix this other than changing everything to red? I didn't have this problem when I worked with AutoCAD 2006 at my old company (we had drafters set up this stuff for us), but now that I'm on my own and trying to get my own plotting figured out, I'm struggling.
I attached an example for reference. It's the windows (gray scaled), plumbing fixtures (cyan), and appliances (magenta) that come out entirely too dark.
View 3 Replies
View Related
Mar 31, 2012
I'm trying to plot drawings through DWG to PDF.pc3, it works fine & opens up.But it skips the save dialog box and automatically saves in my local setting/temp folder with alpha-numeric name.
View 4 Replies
View Related
Dec 28, 2011
Whenever I plot the 3d drawings in PDF or in our plotter, Some lines or some drawings are not shown in the printed layout. sample.jpg. try to check the red circle, there should be other stuff inside it. and in the second circle the one with the line should have a line itself, i just put some red lines to show in the drawing, but please try to check all.
View 3 Replies
View Related
Sep 5, 2007
I am trying to plot multiple drawings all at once. I work with many drawing sizes varies from size A to size E. What would be the best way to plot all drawings to 11 X 17 paper no matter what size the drawings are set to? These drawings are not xref or anything. They all are separated files. I tried using Set Sheet Manager; it will only plot to whatever that size is. I want all drawings to be plotted on 11 X 17. I did some research in the forums here and was not able to find what I was looking for.
View 2 Replies
View Related
Jan 9, 2013
I have drawings with annotation and when I send to the plotter the processing is very slow, and take some time to plot.
View 1 Replies
View Related
Dec 11, 2012
Is it possible to plot (or print) all sub assemblies or parts drawings into separate pages by code?
I do not want to open and print every parts. One code and print all... Is it possible?
View 6 Replies
View Related
Oct 8, 2012
When I attempt to plot one or more of my drawings in model view to pdf the plot will show gaps in between the edge of the paper and my border. The plot will vary per drawing but limited to the ledger and tabloid paper size, the plot area is set to window for the area the border contains, and the plot scale is fit to paper.
View 9 Replies
View Related
Apr 10, 2006
Is is possible to "que" a bunch of drawings to be plotted? I would like to be able to open a drawing and plot it, then while it's plotting, open another drawing and plot it, then another and so on and so on. However, I get an error message stating that another plot is in process and only one plot or publish process can be active at one time. Thus, I'm forced to wait for the last one to complete before sending the next one to the plotter.
View 4 Replies
View Related
Jun 2, 2013
I am fairly new to AutoCAD. I have a AutoCAD drawing file containing 8 drawings on it. What I would like to do is to print each drawing to a single PDF pages.
View 1 Replies
View Related
Dec 22, 2011
I am trying to publish a set of four drawings to a Canon ipf750. I want to make two collated sets. So far I can't get any plot at all.
View 6 Replies
View Related
Aug 13, 2013
Is there a way to increase the access time so printing is faster?
I have AutoCAD 2013 and access drawings over VPN (6 meg pipe).
Both opening the drawings and especially printing them take a very long time.
It takes about 8 seconds to open drawings, due to all the modules loading on the bottom-left of AutoCAD. Printing takes even longer than opening the drawings.
Is there a setting I can change to speed-up access time?
View 5 Replies
View Related
Jun 20, 2012
I'd like to batch plot 50 drawings, all of which have the same title block in the same position. This is easy with the PUBLISH command, but I'd like to be able to add a "stamp" of the customer logo to these drawings, which I have as a block in a separate file. Basically I want to easily be able to plot the same drawings for different customers, the only difference being the customer logo. Is this possible?
View 1 Replies
View Related
Sep 20, 2011
I don't remember ever using this checkbox on the Publish dialog box but today i want to and i can't figure out how to make it work. The help file ~seems~ to say that if i select this, the contents of all open documents (layouts and/or model space) are automatically loaded.... but they don't.
I know i can pick the Add Sheets button and manually select all the drawings i have open but doesn't that defeat the purpose of this checkbox?
View 4 Replies
View Related
May 26, 2011
Is there a way to plot multiple drawings in Acad 2009 without opening each drawing file?
View 1 Replies
View Related
Feb 8, 2013
When we print from a read-only drawing file that is stored on our local drawing fileserver (a PC on our network that is used to store all finished drawing files) it can take several minutes to open the Plot screen and several more minutes to actually print the drawing. It doesn't matter which printer we use to print to. Some of us have had this problem since AutoCAD 2010 but some have had it only since 2013. However if we use an old AutoCAD 2007 there is no printing delay problem so the server doesn't seem to be the source of the problem.
If we print from a drawing file on our own systems (which is actually working off a local network server unless the server is down then we are working off our own computers that will re-sync with the server when it comes back on line) then there is no delay. I have made some local files read-only to see if that was the trigger but no, they printed just fine.
View 4 Replies
View Related
Apr 2, 2013
Lately when I plot my drawings the diagonal lines plot gray. I didn't change the line color. Can't figure it out.
View 1 Replies
View Related
Aug 23, 2011
When I am printing from AutoCAD LT 2012, I randomly get this error message every 10 to 15 drawings that I print. Considering that I print 10-15 drawings at one time, I am getting a fatal error every time I print a set. Why? I don't get this error when printing in AutoCAD 2011LT or 2012 Full Version.
View 1 Replies
View Related
May 21, 2013
I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
View 1 Replies
View Related
Dec 28, 2012
I'm using ACAD LT 2008.
When i try to copy paste some drawing entities from a heavy drawing file to any other file, the program blocks and says 'not responding', endlessly. So i always have to shutdown the program. I experience the same problem using the designcenter: when I try to copy a layout into another drawing, my computer gets stuck.
Another annoying problem with these files is that they are so heavy, while in fact they shouldn't be. I tried the aectoacad file command. In result the file id half as big, but after I open it and save it, again is the original size.
View 5 Replies
View Related
Apr 2, 2013
Every now and then I go back and try to use publish to speed up printing but I always go back to plotting one by one.
I work in a housing construction office and I have 10 separate drawings side by side in model space for house plans that I need plot separate to give to certain people. My problem isn't that I can't publish them separately its that I can't save them over existing pdf's individually predetermined.
Q1. do i just have to go through and change every layout name before or after i publish?
Q2. how do i change the output publish location?
Q3. can each layout be saved to a different existing pdf and remember it?
Q3. can i save these setting across to a new drawing?
View 5 Replies
View Related
Aug 29, 2013
I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
View 2 Replies
View Related
Sep 11, 2012
Where else do they keep this setting? I only have found it in Active Layout in extended dada
(entget (vlax-vla-object->ename(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object)))) '("*"))
The last pice of extended data is:
("PLOTTRANSPARENCY" (1071 . 0))
When i change it to 1
(setq layout(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object))))
(vla-getXdata layout "PLOTTRANSPARENCY" 'type 'data)
(vlax-safearray-fill data '("PLOTTRANSPARENCY" 1))
(vla-setXdata layout type data)
it stays there (extended data), but the setting in Plot dialog box doesn't change!!! And it still prints no transparency.
It takes to save the drawing and reopen it again to see the change.
The command -PLOT does not have this setting as well, so my options back to VBA or Lisp, but HOW?
View 9 Replies
View Related
Feb 6, 2012
I have a problem to plot thin lines and dots when Plot Transparency option is On in the Plot dialog box.
The lineweight is a half of the original. I think i have tried everything.
It shows correctly in the Plot Preview but when printed there are no dotted hatches and lines are much thinner.
View 9 Replies
View Related
Aug 21, 2012
Can users with a 64 bit computer share pc3's and pmp's with 32 bit users without adverse effects?
View 1 Replies
View Related
Aug 29, 2011
When I publish a drawing as a multipage DWFx (or PDF for that matter) with "Include Layer Information" selected, the Plot Stamp (Simple Date/Time and Text) comes out but on different layers on different layouts.
Example:
First Layout : Plotstamp resides on Layer 0
Second Layout: Plotstamp resides on Layer 3P
Third Layout: EQPT-VC
etc
Some general information:
Autodesk AutoCAD 2011 64bit
Autodesk DesignReview - 2012
Adobe Acrobat X Professional
Layer 0 Is thawed/plotable and on in all layouts, viewports all layers, viewports. It has at least one entity per layout
Is there anyway to rectify this and still use the built-in Plot Stamp?
View 2 Replies
View Related
Jan 17, 2012
So the firm I work at has AutoCAD 2000 and 2007. 2000 is installed on 5 out of the 7 computers, and 2007 installed on 6 of the 7 computers. 2 of the computers running just ACAD 2007 are Windows Vista, while all the other computers are Windows XP. We have an OCE TDS320 CAD Printer, an HP Wide Format Printer and a Panasonic 330 Copier/Fax/Printer. Our Problem is that When you try to plot an ACAD2007 drawing it will only plot it in color. This problem did not exist before 1/12/12.
When I select the Plot Style to print I select "monochrome.stb" which has always worked, now all of a sudden it doesnt. The only way i have found to fix this problem is to change my drawing to layer "0" which is white, so when it tries to print in color it will print black. Another Guy in the firm i work at has ACAD2007 on his computer running XP, he also has 2000 running on the same computer. When he tries to plot on ACAD2007 the same thing happens, so it is not isolated to my computer.
There is a difference though between his Plot Styles on his computer and the ones on mine. His end with .ctb, which works. It only doesnt work when he tries to print a drawing i made off of my computer. Because of this we copied his Plot Style folder for AutoCAD 2007 and installed it into the folder with all of my plot styles on my computer, replacing the ".stb" with ".ctb" That did not work at all. The last thing we tried was to copy over a file that plotted correctly, delete the drawing and draw what we needed, This also did not work. So basically we are thinking that ACAD2007 is not reading the Plot Styles correctly, or the Plot Styles are wrong or currupt.
View 1 Replies
View Related
Jan 17, 2013
I have several objects on various layers in model space and they are exposed through a viewport in a paperspace layout. I also have a corporate CTB plot style.
Here is my problem: If i plot the objects from model space, they all plot with the correct lineweights as defined in our corporate CTB, but when i plot them from the paperspace layout, some but not all objects plot with a heavier lineweight than what is defined in the CTB.
I thought the CTB was supposed to override any settings applied to individual objects, but more importantly, why the different results, on the same objects, depending upon the space from which they're plotted?
View 3 Replies
View Related
Aug 13, 2012
I have found that when I Publish, the drawing comes out shifted about 1/8" down and 1/8" left as compared to when I use Plot. Which of course is just enough to cut off the sheet border which is 1/2" from the paper edge. I am using the same Page Setup for both Publish and Plot, same drawing.
This is to an Oce TDS600, and it only happens with 15x21 paper size. All paper sizes are set to 0" border. Probably an Oce issue, but have any of you seen this before?
View 1 Replies
View Related