Whenever I plot the 3d drawings in PDF or in our plotter, Some lines or some drawings are not shown in the printed layout. sample.jpg. try to check the red circle, there should be other stuff inside it. and in the second circle the one with the line should have a line itself, i just put some red lines to show in the drawing, but please try to check all.
View 3 RepliesIn AutoCAD 2014 and ASD2013 I cannot choose one of the printer, which is installed on Windows (OCE TDS600). It is strange, because Autocad sees it on the list of available plotters, but when I try to select it - it automaticly changes to "None".
The plotter is properly configured - I can print with it from Revit 2013 without any problems. Also when I switch account to any other (on that same computer) everything works fine.
I tried to add this plotter through "Add-A-Plotter Wizard", but each time I obtain an error massage "Autodesk Hardcopy component failed..."
[URL]
I've recently (this morning) come into the issue of the old plot printers being saved in CAD files. I've found a number of tutorials online about adding new pages, and setting the default plotter to "none" via DWGTruView, but these are just shy of what I'm looking for.
Is there any way to tell AutoCad 2013 that if the current/default plotter is "None" to set it to a certain printer? I have about a thousand CAD files that need this change made on them, so obviously a more automated approach would be greatly appriciated. Currently the entire set of them has has their Plotters set to "None", and a custom Page Setup configured.
I recently stopped using my HP755 plotter and am now plotting "dwg to pdf". The problem is when I go to plot I get a warning message stating that "this plotter configuration cannot be used" and it goes on to list a few reasons why and selects the "none" plotter. Then when at the plot setup page I can continue to plot as I normally would. Why am I getting this warning and how do I stop it?
View 2 Replies View RelatedI am trying to set default plotter and plot style so I dont have to select every time but AutoCAD is not keeping the setting. I went to "Options", "Plot & Publish" and selected my plotter I want to be default but it's not keeping that setting. I also changed the default plot style under "Plot Style Table Settings" under "Plot & Publish" but AutoCAD is not keeping that setting as well. URL...
View 1 Replies View RelatedI just got Autocad 2000i as an upgrade from 13 and 14. I have a summagraphics HiPlot 7200.It was set as a windows system printer on the old autocad versions, 2000i will not accept the widows driver (which works great on the old systems) and i have to use hpgl emulation wich sucks on 2000i
View 2 Replies View RelatedWe recently made the switch from R14 to 2000. In the LONG process of trying to figure out plotting in 2000, I ended up having a lot of plotter names to select from when I go to plot. We have 2 HP 450C plotters and 2 printers (HP5000N & HP 1220C) and I only have one pc3 file for each on the server. I want to nknow how to remove some of the plotter names from ACAD and have only the 2 plotters and 2 printers to choose from when you go to plot.
View 6 Replies View RelatedI was wondering if there is a way to set the plotter to cut directly after the drawing. i have changed the setting to extent but it still prints the whole page size.
View 9 Replies View RelatedI'm trying to plot a pdf file that is approx 1MB. We have a HP designjet 500 plus, with 32MB of Ram. When I try to plot it though, The plotter displays a messag: 'Out of memory. Data Lost'. I unfortunately only have the PDF file. Is there any way for me to plot this file?
I tried to print it as a pdf by using a virtual pdf printer, but the end result is the same.
So I have the educational version of ACAD 2012 and this is my first time using that version. My model is done and I formatted my layout with a border and the model to scale in the viewport. When I go to plot to PDF, all I see is the border. I've tried fiddling with colors and viewports but neither of those did anything.
View 3 Replies View RelatedI need to change printer/plotter (maybe PC3 file) on my drawings. For example I have 'printerN.pc3' setted and I need to set 'PrinterM.pc3'. Also need to change print scale. But since I have many drawing I need somithing thatcan do iy automatically. So what I need:
I need to replace specific plotter to anither plotter:
1. For example if plotter setted to "HP" -> change to "Canon"
2. If paper size (2) is A3, set Plot scale (3) to 1:1.015, if Paper size (2) - A4, set Plot scale (3) to 1:1.02
Seems like I can do it with AutoLISP.
*** Using AutoCAD 2009 and 2011***
I have problem with AutoCAD DWG to PDF printer. When I use a vector drawing with a raster map attached and print the layout with the DWG to PDF printer, all the vector elements looks perfect in the output pdf file, but the raster image is almost unreadable. It doesn't work if I increase print resolution and it looks if there would be some kind of default jpeg compression inside this printer but there aren't any settings to control it or simply turn it off. After plotting such a drawing on the HP plotter it is so awful that there is no use of such a file.
View 9 Replies View RelatedI get this message when I go to print in acad 2008.The following shortcuts in the plotter search were invalid and ignored: (invalid path is displayed here...) ending with .ink.The path exists and yet it says invalid and ignored. I hit OK and it continues to the plot dialog and everything works. How to correct the path or disable the dialog... I looked in the options/files(tab)/printer support file path and they are setup to our printers, but the error continues to pop up.
View 6 Replies View RelatedI don't need the capability to print directly to a plotter, but I need to set up a dummy plotter to generate plt files that will be changed to tif files with our Kip. Any plotter driver that works for this situation? Every one I have tried has generated a plt file, but the Kip would not convert it or open it.
View 8 Replies View RelatedI have a question about plotting at Canon plotter (Canon imagePROGRAF iPF750) with possible has feature to plot as a drawn area.
Simply say I want to specified only one custom/roll paper size, make it custom size as a default. After that I want to plot exactly the accurate drawn area from my dwg. So with this settings I cannot specified custom paper size for each unique dwg.
For example I'm using this settings with another plotting device -- Xerox WF (picture to see the chosen settings) and working like a charm.
Although automatic rotating is on, the HP plotter DesignJet 500 plus uses the paper wasting method.
In the layout preview of Civil 3D 2012 the result looks good, but I need one meter of the paper roll for this plot.
In the process of releasing 2013 to the office. We have about 60 machines being loaded, varying from 64-bit Win 7, 32-bit Win 7 and 32-bit Win XP. I have gone through and created new PC3 files for our two KIP printers (3000 & 7000 series). I added one custom page size to each to create a PMP that goes along with them. These files have been placed onto a network folder for all users to access. This is where my confusion begins.
When other users go to utilize these files it is giving an error stating that "the plotter configuration cannot be found, driver cannot be found, device cannot be found, yada yada. The none has been substituted."
So we began to look at the PC3 files and see what the issues are. When the same file on the Server is copied down to a local machine it changes back to a KIP10 driver down from a KIP11 driver on the network. Make Sense?
In order to fix I began running the "Add-A-Plotter Wizard" on the local machine. Created a new PC3 wiih a different name and went back into the program. Now the PC3's that did not work before WORK.
In short, since the 2013 version has a new file format do we have to run the "Add-A-Plotter Wizard" on all local machines before the standard PC3 file will work effectively? Or does having 2011 version still on the machines have an effect on these files?
Win 7 Pro 64-Bit - Dell T1600
Intel Xeon 3.30Ghz
8Gb RAM
Civil 3D 2013
I made an attempt at drawing out what I'm trying to say in MSPaint. At my office we use an HP Designjet 800ps to plot our drawings, most everyone uses AutoCAD 2010-2011 and I use AutoCAD LT 2010. All of our drawings are ANSI C size (17"x22") and we use paper rolls that are 24" wide x 150' long. For some reason our plotter always prints our drawings sideways causing us (read 'me, the assistant') to have to trim the excess off of every single print. Not only is this time consuming but it is a huge waste of paper! If I can get it to rotate we will get 19 MORE plots out of every roll of paper!!!
I was wondering if there is some way to change settings somewhere so that our drawings are printed the correct way, saving me lots of time and saving our company lots of paper? Is it normal to plot this way?
How do I get the built-in PDF plotter quality up to my adobe pdf plotter. I want to do use publisher and make mulitple page pdf's and as I understand it I have to use the built-in plotter to do it. As of right now I have to sperate pages with adobe and then combie them to make a single pdf.
(how the built-in PDF plotter looks)
(How I want to have the built-in plotter look.) Without changing settings in my pdf viewer, I need to be able to send these out to customers.
I'm useing AutoCAD LT 2010
I have a new machine with windows 7 64 bit and autocad 11. When I choose the 6204 as my plotter I get the following message : "This plotter configuration cannot be used for one of these reasons: the driver cannot be found, the device cannot be found, or the driver has a problem. The None plot device has been substituted." it does not matter if I choose to try and print to the plotter or make a PDF this error comes. up..
View 8 Replies View RelatedI work with autocad 2011 and my problem is the following.
When my 3D vieuwport is properly set in my layout page. I try to plot my layout. when i've compledet my plotsettings I first check out that everyting is ok. and evrything looks great. but when I plot everything is plotted exept the 3D drawing. althoug the 3d drawing is shown on the plot preview. (look at pdf's to see what I mean).
Actual-Plot_3D.pdf
Plot-preview_3D.pdf
I am trying to write some VBA code to print several drawings present in a folder.
I am not a VBA expert. I wrote some little macros in excel but it is the first one in Autocad.
I have a small code that opens a drawing, counts it, closes it and then loops for other drawings.
I have a code that print a drawing by defining some printing parameters.
Separately, both work. But when I call the second one into the loop, I get a error:
"Run-time error '-2147418111 (800100001)':
Automation error
Call was rejected by callee."
I'm using Windows 7 and Autocad 2012.
See my code below:
Option Explicit
Dim filename As String
Dim filepath As String
Dim full_filename As String
Dim i As Integer
Sub print_trial()
[Code] ......
I'm trying to plot my drawings and have all my line weights be the same in the final plot so that no line is more bold than another. I do custom home designs and am now adding in additional information that uses different colors for appliances, plumbing, etc.
I'm using the standard red, cyan, magenta, green, 252 gray scale colors, however, when I plot, all of the lines except red are thick and make the objects entirely too bold for my purposes. How do I fix this other than changing everything to red? I didn't have this problem when I worked with AutoCAD 2006 at my old company (we had drafters set up this stuff for us), but now that I'm on my own and trying to get my own plotting figured out, I'm struggling.
I attached an example for reference. It's the windows (gray scaled), plumbing fixtures (cyan), and appliances (magenta) that come out entirely too dark.
I'm trying to plot drawings through DWG to PDF.pc3, it works fine & opens up.But it skips the save dialog box and automatically saves in my local setting/temp folder with alpha-numeric name.
View 4 Replies View RelatedI am trying to plot multiple drawings all at once. I work with many drawing sizes varies from size A to size E. What would be the best way to plot all drawings to 11 X 17 paper no matter what size the drawings are set to? These drawings are not xref or anything. They all are separated files. I tried using Set Sheet Manager; it will only plot to whatever that size is. I want all drawings to be plotted on 11 X 17. I did some research in the forums here and was not able to find what I was looking for.
View 2 Replies View RelatedI have drawings with annotation and when I send to the plotter the processing is very slow, and take some time to plot.
View 1 Replies View RelatedIs it possible to plot (or print) all sub assemblies or parts drawings into separate pages by code?
I do not want to open and print every parts. One code and print all... Is it possible?
When I attempt to plot one or more of my drawings in model view to pdf the plot will show gaps in between the edge of the paper and my border. The plot will vary per drawing but limited to the ledger and tabloid paper size, the plot area is set to window for the area the border contains, and the plot scale is fit to paper.
View 9 Replies View RelatedIs is possible to "que" a bunch of drawings to be plotted? I would like to be able to open a drawing and plot it, then while it's plotting, open another drawing and plot it, then another and so on and so on. However, I get an error message stating that another plot is in process and only one plot or publish process can be active at one time. Thus, I'm forced to wait for the last one to complete before sending the next one to the plotter.
View 4 Replies View RelatedI am fairly new to AutoCAD. I have a AutoCAD drawing file containing 8 drawings on it. What I would like to do is to print each drawing to a single PDF pages.
View 1 Replies View RelatedI am trying to publish a set of four drawings to a Canon ipf750. I want to make two collated sets. So far I can't get any plot at all.
View 6 Replies View Related