AutoCAD Print / Plot :: Canon Plotter And Drawn Area Printing?
Dec 17, 2013
I have a question about plotting at Canon plotter (Canon imagePROGRAF iPF750) with possible has feature to plot as a drawn area.
Simply say I want to specified only one custom/roll paper size, make it custom size as a default. After that I want to plot exactly the accurate drawn area from my dwg. So with this settings I cannot specified custom paper size for each unique dwg.
For example I'm using this settings with another plotting device -- Xerox WF (picture to see the chosen settings) and working like a charm.
View 1 Replies
ADVERTISEMENT
Dec 17, 2013
I have a question about plotting into Canon plotter (Canon imagePROGRAF iPF750) with possible feature to plot as a drawn area.
Simply say I want to specified only one custom/roll paper size, make it custom size as a default. After that I want to plot exactly the accurate drawn area from my dwg. So with this settings I cannot specified custom paper size for each unique dwg.
I'm using this settings with Xerox WF (picture to see the settings) and working like a charm.
View 4 Replies
View Related
Apr 23, 2012
Although automatic rotating is on, the HP plotter DesignJet 500 plus uses the paper wasting method.
In the layout preview of Civil 3D 2012 the result looks good, but I need one meter of the paper roll for this plot.
View 2 Replies
View Related
Jun 25, 2013
In AutoCAD 2014 and ASD2013 I cannot choose one of the printer, which is installed on Windows (OCE TDS600). It is strange, because Autocad sees it on the list of available plotters, but when I try to select it - it automaticly changes to "None".
The plotter is properly configured - I can print with it from Revit 2013 without any problems. Also when I switch account to any other (on that same computer) everything works fine.
I tried to add this plotter through "Add-A-Plotter Wizard", but each time I obtain an error massage "Autodesk Hardcopy component failed..."
[URL]
View 2 Replies
View Related
Mar 8, 2011
I have a new machine with windows 7 64 bit and autocad 11. When I choose the 6204 as my plotter I get the following message : "This plotter configuration cannot be used for one of these reasons: the driver cannot be found, the device cannot be found, or the driver has a problem. The None plot device has been substituted." it does not matter if I choose to try and print to the plotter or make a PDF this error comes. up..
View 8 Replies
View Related
Jun 14, 2011
I recently stopped using my HP755 plotter and am now plotting "dwg to pdf". The problem is when I go to plot I get a warning message stating that "this plotter configuration cannot be used" and it goes on to list a few reasons why and selects the "none" plotter. Then when at the plot setup page I can continue to plot as I normally would. Why am I getting this warning and how do I stop it?
View 2 Replies
View Related
Dec 6, 2000
I just got Autocad 2000i as an upgrade from 13 and 14. I have a summagraphics HiPlot 7200.It was set as a windows system printer on the old autocad versions, 2000i will not accept the widows driver (which works great on the old systems) and i have to use hpgl emulation wich sucks on 2000i
View 2 Replies
View Related
Jan 2, 2003
We recently made the switch from R14 to 2000. In the LONG process of trying to figure out plotting in 2000, I ended up having a lot of plotter names to select from when I go to plot. We have 2 HP 450C plotters and 2 printers (HP5000N & HP 1220C) and I only have one pc3 file for each on the server. I want to nknow how to remove some of the plotter names from ACAD and have only the 2 plotters and 2 printers to choose from when you go to plot.
View 6 Replies
View Related
May 20, 2011
I was wondering if there is a way to set the plotter to cut directly after the drawing. i have changed the setting to extent but it still prints the whole page size.
View 9 Replies
View Related
Jul 30, 2012
I'm trying to plot a pdf file that is approx 1MB. We have a HP designjet 500 plus, with 32MB of Ram. When I try to plot it though, The plotter displays a messag: 'Out of memory. Data Lost'. I unfortunately only have the PDF file. Is there any way for me to plot this file?
I tried to print it as a pdf by using a virtual pdf printer, but the end result is the same.
View 1 Replies
View Related
Mar 21, 2012
I need to change printer/plotter (maybe PC3 file) on my drawings. For example I have 'printerN.pc3' setted and I need to set 'PrinterM.pc3'. Also need to change print scale. But since I have many drawing I need somithing thatcan do iy automatically. So what I need:
I need to replace specific plotter to anither plotter:
1. For example if plotter setted to "HP" -> change to "Canon"
2. If paper size (2) is A3, set Plot scale (3) to 1:1.015, if Paper size (2) - A4, set Plot scale (3) to 1:1.02
Seems like I can do it with AutoLISP.
*** Using AutoCAD 2009 and 2011***
View 2 Replies
View Related
Jan 27, 2012
I have problem with AutoCAD DWG to PDF printer. When I use a vector drawing with a raster map attached and print the layout with the DWG to PDF printer, all the vector elements looks perfect in the output pdf file, but the raster image is almost unreadable. It doesn't work if I increase print resolution and it looks if there would be some kind of default jpeg compression inside this printer but there aren't any settings to control it or simply turn it off. After plotting such a drawing on the HP plotter it is so awful that there is no use of such a file.
View 9 Replies
View Related
Nov 16, 2007
I get this message when I go to print in acad 2008.The following shortcuts in the plotter search were invalid and ignored: (invalid path is displayed here...) ending with .ink.The path exists and yet it says invalid and ignored. I hit OK and it continues to the plot dialog and everything works. How to correct the path or disable the dialog... I looked in the options/files(tab)/printer support file path and they are setup to our printers, but the error continues to pop up.
View 6 Replies
View Related
Jan 17, 2012
I don't need the capability to print directly to a plotter, but I need to set up a dummy plotter to generate plt files that will be changed to tif files with our Kip. Any plotter driver that works for this situation? Every one I have tried has generated a plt file, but the Kip would not convert it or open it.
View 8 Replies
View Related
Aug 20, 2013
I'm using 2008 and trying to get one side of my plots to be 1/2" from the edge of the paper (from one of the ends, not the sides). When plotting from R14, our plotter understands just fine and prints a standard ARCH D sheet just the way we want it. With 2008, our standard sheet template sits outside the dashed line that indicates plottable area.
I think that autoCAD thinks that the printer can't print that close to the edge, but obviously it can. I've gone into the 'modify paper sizes' options and adjusted the bottom margin to allow enough space for the plot. Plot preview looks fine and nothing is getting cut off, but when I actually print, the printer just prints an extra inch of paper past the margin I redefined so I end up with a sheet that is 24 x 37 and the edge of the plot is still not 1/2" from the edge of the paper like I need it to be.
We are trying to move from R14 to 2008 (and eventually 2014) as the office standard and this is the last hurdle that is baffling us.
View 4 Replies
View Related
Nov 8, 2012
In the process of releasing 2013 to the office. We have about 60 machines being loaded, varying from 64-bit Win 7, 32-bit Win 7 and 32-bit Win XP. I have gone through and created new PC3 files for our two KIP printers (3000 & 7000 series). I added one custom page size to each to create a PMP that goes along with them. These files have been placed onto a network folder for all users to access. This is where my confusion begins.
When other users go to utilize these files it is giving an error stating that "the plotter configuration cannot be found, driver cannot be found, device cannot be found, yada yada. The none has been substituted."
So we began to look at the PC3 files and see what the issues are. When the same file on the Server is copied down to a local machine it changes back to a KIP10 driver down from a KIP11 driver on the network. Make Sense?
In order to fix I began running the "Add-A-Plotter Wizard" on the local machine. Created a new PC3 wiih a different name and went back into the program. Now the PC3's that did not work before WORK.
In short, since the 2013 version has a new file format do we have to run the "Add-A-Plotter Wizard" on all local machines before the standard PC3 file will work effectively? Or does having 2011 version still on the machines have an effect on these files?
Win 7 Pro 64-Bit - Dell T1600
Intel Xeon 3.30Ghz
8Gb RAM
Civil 3D 2013
View 1 Replies
View Related
Oct 24, 2012
I made an attempt at drawing out what I'm trying to say in MSPaint. At my office we use an HP Designjet 800ps to plot our drawings, most everyone uses AutoCAD 2010-2011 and I use AutoCAD LT 2010. All of our drawings are ANSI C size (17"x22") and we use paper rolls that are 24" wide x 150' long. For some reason our plotter always prints our drawings sideways causing us (read 'me, the assistant') to have to trim the excess off of every single print. Not only is this time consuming but it is a huge waste of paper! If I can get it to rotate we will get 19 MORE plots out of every roll of paper!!!
I was wondering if there is some way to change settings somewhere so that our drawings are printed the correct way, saving me lots of time and saving our company lots of paper? Is it normal to plot this way?
View 1 Replies
View Related
Aug 29, 2013
I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
View 2 Replies
View Related
Apr 8, 2010
I am plotting a file that has a pdf referenced into it. The quality of the plot is degraded only at the inserted pdf. The rest of the AutoCAD file looks fine. The inserted pdf is a printed AutoCAD file which looks clear and even has embedded layers and linework I can snap to (which seems to indicate that there is vector information present when it is in Autocad.
I have attached an image with 4 zoomed-in screen shots to show what I'm describing.
View 6 Replies
View Related
Jan 12, 2011
When printing in 3d with the vp set to 3dhidden and the shade plot set to hidden legacy some solid items print with the wire frame. This usualy happens with torus and cones. How do I stop this?
In the example look at the U-bolt.
View 2 Replies
View Related
Dec 22, 2011
I am trying to publish a set of four drawings to a Canon ipf750. I want to make two collated sets. So far I can't get any plot at all.
View 6 Replies
View Related
Jun 9, 2013
I am trying to plot a layout sheet 24'' W x 18" H. The frame on my sheet is 22''W x 16''L (inside the dash lines limits we see on the layout). I believe I prepare the print correctly:
- Select the printer (HP DESIGN JET PS)
- I use the window fonction to select the printable area ( left upper corner and then the opposite corner).
- Select Paper size Arch C (landscape)
- Paper orientation: Lansdcape
The preview shows that the upper and bottom lines of my frame will not print, and they do not, even if I try (see the attachement below).
Is this a driver problem?
View 3 Replies
View Related
Mar 15, 2013
Is there a setting that you can turn on that will ignore objects (texts, lines, ect.) that are outside the printable area? If objects are to be placed "outside the box" my titleblock gets inadvertently shifted until the objects are deleted?
View 5 Replies
View Related
Oct 30, 2012
When printing to PDF via the DWG to PDF.pc3, I am getting a blank PDF. When i hit preview everything shows fine, but when I print it all disappears. The layers list shows in the PDF on the right, but turning them on and off does nothing.
View 3 Replies
View Related
Oct 30, 2010
I'm using ACAD2011 and a HP DesignJet 500 plotter. We use PDF underlays of scanned charts, maps, etc in our cad plans and sometimes the PDFs will only partially plots even though the rest of the cad line work plots. We are using 2007 dwg file format to make files compatible with another program. I have monkeyed with the RASTERPERCENT and RASTERTHRESHHOLD variables but still same problem.
View 3 Replies
View Related
Mar 5, 2013
DWG to PDF is not printing certain files correctly. It appears to only happen with the dots hatch pattern and the Dots linetype with a 0.0003" lineweight in the CTB file. The lines with the issue have color and pline width (zero). Print preview show, plotting to a printer, and using adobe show the lineweight correctly but using DWG to PDF does not.
C3D 2013 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
View 8 Replies
View Related
Sep 28, 2010
Using an HP 1050c Plus with the latest HP drivers for Windows XP on AutoCAD MEP 2009. If I use the standard printer margins it all works fine, except that the margins are way too big and no border we have will print without cutting off at least .25" all around. If I go to properties and change the margins to .1" all around, my 42x30 sheets will print out with 43" of paper. If I make them .25", I will get 42.5" of paper. I just started at this company and have never had this problem before with an HP 1050 plotter. I have tried different combinations of the Extend margins, Inked area and autorotate checkboxes but haven't been able to figure it out yet.
View 2 Replies
View Related
Dec 4, 2012
i used the page setup and creat new setup to print some area ..
ist possible to make a setup to print multi area .. - when i creat new one it ask to select what i want to print , but it just ask once ,if i want to print other thing i need to creat new setup ...
what i need is to selcect multi time .
View 1 Replies
View Related
Apr 24, 2012
When batch plotting using an external plot utility from Model Space, I get pages with different placements on the paper, the issue appears to be that some sheets are selected for Center the Plot and some are not. Even though my plot utility has a selection for Center Plot, it won't override what is already in the page for this one option. Is there a line command I can run in a script that would allow me to set the plot to center without having to open each sheet and reset this manually?
View 3 Replies
View Related
Sep 23, 2011
I have a rather bizarre issue within AutoCad when printing.
This is affecting multiple people, using various machines (all the same model). It is happening when they print to multiple printers, and also when they print to PDF.
They are losing some information. The drawings themselves usually look ok, it is some of the extra data. This can be in the footnote information in the corner. This can be data within the actual drawing. It is not a guaranteed fault, and affects them all intermittently.
View 2 Replies
View Related
Jul 27, 2006
How to plot PDF format drawing to Xerox 8830 plotter which the drawing have a jpg logo will change to a black fill?
View 9 Replies
View Related
