AutoCAD LT :: Canon Plotter And Drawn Area Printing
Dec 17, 2013
I have a question about plotting into Canon plotter (Canon imagePROGRAF iPF750) with possible feature to plot as a drawn area.
Simply say I want to specified only one custom/roll paper size, make it custom size as a default. After that I want to plot exactly the accurate drawn area from my dwg. So with this settings I cannot specified custom paper size for each unique dwg.
I'm using this settings with Xerox WF (picture to see the settings) and working like a charm.
View 4 Replies
ADVERTISEMENT
Dec 17, 2013
I have a question about plotting at Canon plotter (Canon imagePROGRAF iPF750) with possible has feature to plot as a drawn area.
Simply say I want to specified only one custom/roll paper size, make it custom size as a default. After that I want to plot exactly the accurate drawn area from my dwg. So with this settings I cannot specified custom paper size for each unique dwg.
For example I'm using this settings with another plotting device -- Xerox WF (picture to see the chosen settings) and working like a charm.
View 1 Replies
View Related
Oct 13, 2011
We have a blocked out text area that does not want to be erased with the masked out text function. How can we remove an area drawn with the masked command.
View 2 Replies
View Related
Sep 19, 2012
For some reason, when I am plotting on some drawings, the HP Designjet 5500 is printing out a tan background. I've tried copying and pasting into a new drawing, which has fixed it before, but not this time. I'm using Autocad 2008. 20120919_143304.jpg
View 2 Replies
View Related
Mar 13, 2013
When i make plt file in cad ok. It save plt file and location but automatically print to plotter. I need just make plt without print at this moment.
View 1 Replies
View Related
Aug 20, 2013
I'm using 2008 and trying to get one side of my plots to be 1/2" from the edge of the paper (from one of the ends, not the sides). When plotting from R14, our plotter understands just fine and prints a standard ARCH D sheet just the way we want it. With 2008, our standard sheet template sits outside the dashed line that indicates plottable area.
I think that autoCAD thinks that the printer can't print that close to the edge, but obviously it can. I've gone into the 'modify paper sizes' options and adjusted the bottom margin to allow enough space for the plot. Plot preview looks fine and nothing is getting cut off, but when I actually print, the printer just prints an extra inch of paper past the margin I redefined so I end up with a sheet that is 24 x 37 and the edge of the plot is still not 1/2" from the edge of the paper like I need it to be.
We are trying to move from R14 to 2008 (and eventually 2014) as the office standard and this is the last hurdle that is baffling us.
View 4 Replies
View Related
Apr 23, 2012
Although automatic rotating is on, the HP plotter DesignJet 500 plus uses the paper wasting method.
In the layout preview of Civil 3D 2012 the result looks good, but I need one meter of the paper roll for this plot.
View 2 Replies
View Related
Jun 20, 2013
How do I get the built-in PDF plotter quality up to my adobe pdf plotter. I want to do use publisher and make mulitple page pdf's and as I understand it I have to use the built-in plotter to do it. As of right now I have to sperate pages with adobe and then combie them to make a single pdf.
(how the built-in PDF plotter looks)
(How I want to have the built-in plotter look.) Without changing settings in my pdf viewer, I need to be able to send these out to customers.
I'm useing AutoCAD LT 2010
View 9 Replies
View Related
Jun 13, 2012
printing corel draw to a cutter plotter that does not register as a printer Eh720
View 2 Replies
View Related
May 9, 2013
I'm used to HP ploters, but our division got a canon last year. I'm not able to plot a 36x48 sheet on this plotter. For some reason, the plotter cuts off the length/width at 36". It's like the plotter is forcing it to cut at 36". When I choose to the paper size, "ARCH E borderless" shows. The plot preview looks fine, but the hard copy is always cut off.
View 1 Replies
View Related
Oct 29, 2013
I have Photoshop CS4 and up graded my computer to an iMac, with OS X 10.8.5. I have a Canon printer imagePROGRAF iPF6100. I have download the necessary drivers from Canon. The iMac see the printer and have done a nozzle check through the iMac. When in Photoshop there is no joy in getting a print off. Do I need an update from Adobe and if so where is the web link?
View 1 Replies
View Related
Dec 15, 2012
My prints are no longer coming out centered. I have the "center" box checked in the CS6 print dialogue box. The prints are not centered left to right or top to bottom.
This seems to be a problem since I upgraded to CS 6 extended and or newest print driver for my Canon Pro 9500.
I believe that since I did one or both of these changes there is a border (consitst of slanted hash marks around the perimiter of the print dialogue picture) in the preview of the print.The border segments left and right are not equal and are very uneven in width. The top and bottom borders are closer but still not even in width.
View 4 Replies
View Related
Apr 18, 2012
I've been experiencing a problem when printing borderless on with LR4. Although I'm using borderless print settings, all margins are 0 and cell size is 4x6 or 8x10 or whatever it needs to be, the bottom edge of all photos has a 1-2mm line of unprinted paper.
This is also visible on the print preview of LR4, as you can see on the bottom of the attached image.
View 3 Replies
View Related
Nov 2, 2011
I just bought a Canon Pixma ip4920 printer, and I use Paint Shop Pro X4 - the problem i'm having is that what I see on scrren and what I get when printing a picture are totally different. My computer is a Dell Inspiron laptop. How to calibrating the colors to match?
View 8 Replies
View Related
Sep 27, 2013
My printer (actually, it's a laser engraver) is reading the entire artboard in addition to the actual image as needing to be run when set for "3D" (aka greyscale) images, as opposed to just going to the image on the artboard. It is running as though it sees the empty space as white and it is trying to "color" it. When it gets to where the image is placed on the artboard, it runs the image (black or greyscale) within/on it. It wastes A LOT of time. I guess, what I really want to know is how to make sure the artboard area is not being picked up and seen as a part of the image. I need it's dimentions to be read, but not any fill except for the actual image(s) on the artboard. I've never had this problem in the past with other machines (by the same manufacturer) using Illustrator. I was using CS5, not CC.
I ran this by the laser company's techs and they say it is an issue with my Illustrator/Adobe set up, not their driver.
View 1 Replies
View Related
Nov 24, 2012
Is there a profile for Canon lenses 8-15 mm and Canon 800mm ? Where can it be found ?
View 2 Replies
View Related
Apr 6, 2009
I've recently migrated from AutoCAD 2008 (non-industry specific) to AutoCAD 2010 so I don't know if this was an issue in 2009.
Back in 2008, when I choose the 'window' option when specifying a plot area, AutoCAD would show the workspace so that I could manually select a windowed plot area, and at the same time the whole workspace would be greyed out except the previously active window area.
This was handy, because we can have as many two dozen title-blocks (and therefore separate viewports) in paperspace, and knowing what plot area I last plotted or added as a saved page setup.
In 2010, it no longer does that. I now have to rely on the dashed border to know where the active plot area is/was (checked 'display printable area' in options>display tab) which I personally don't really like using.
View 9 Replies
View Related
Oct 23, 2012
How to changes the settings for the "Square Area" in mapcheck's closure summary. When I right-click the dwg name in the Settings tab of Toolspace and choose Edit Drawing Settings, then Ambient Settings, I see the Area settings, but in the closure summary, there is also "Square Area". Why are these both there? It WOULD be nice to show sq. ft. as well as acres, but I can't find anywhere to edit it.
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
View 2 Replies
View Related
Oct 12, 2011
I want to know if there is an easier ACAD solution for drawing. In the given triangle of ABC (sides and angels are known) I want to draw line CM so that the area of BCM becomes 2000 cm (are of ABC is 5311.7 cm3).
Is there an easy ACAD way for drawing this line without using trigonometry for calculation?
View 6 Replies
View Related
Apr 14, 2013
I need to determine whether an area intersects with another area.The left case can be easily determined by Polyline.IntersectWith(Polyline...).But in the right case, the two polygons intersect/overlap each other while polylines do not intersect.
What would be the efficient way to determine the right case polygons are intersecting polygons?
View 8 Replies
View Related
Dec 17, 2012
I can not add any plotter, i try but i can. I open File>Plotter Manager but when i click on plotter manager it opens My Files.
I think there are some missing part for these. I have the same problem with revit 2013 while try to open a new file cause on there also there are some missing files about family.
View 2 Replies
View Related
May 17, 2012
I have a new macbook and no printer. Id like to set up my print settings to plot to pdf and choose the correct paper sizes and utilize my line type print settings. I am using auto cad 2013 and see i can create a pdf but it doesn't allow my set my plotter up as a pdf.
View 3 Replies
View Related
Jul 25, 2011
So we have a new plotter at work, and I am trying to use it with the publish command. However, because all of our old drawings are saved with our old plotter name, choosing the new plotter isn't an option for all of our old dwgs that havent been set up using the new plotter name. Since our dwgs number in the 1000s, going through each one and renaming them would be impracticable.. but having to individually plot each one is pretty impracticable as well..
So I tried to figure out a workaround, by opening up our new template that has the new plotter configuration on it, hoping I would be able to use it to set all the old dwgs that I have open at the time to the new plot setting.. but the printer name comes up as something different when I try to use it for publish, and if I use it, I get an error and nothing prints. I know the settings used in the new template work, I have been able to print it out. So what I'm asking is, is there anyway I can use the new plotter to publish all of our old drawings?
View 2 Replies
View Related
Dec 28, 2011
using a plotter on a network. I moved all my plot styles to a folder on the network where everyone can use them and pointed the path on each station. My only problem now is that each station seems to have the drivers ect.. for the plotter on stand alone stations. What happens if I open a dwg on my station and then close it and go to another station I get warning that drivers are not found,the device can not be found. Do I need to copy the driver and device folders to the network and have the settings on each PC point to that folder.
View 3 Replies
View Related
Aug 18, 2012
Will Lightroom allow tethering with Canon T3i and Canon T4i ?
View 2 Replies
View Related
Apr 4, 2012
I'm trying to copy plot files to a plotter with filecopy(plotfile,\serverplottername) it works fine when I have the UNC address but there are network printers without this address that I need to copy files too. I have the IP addresses of these printers.Is there a way to send a file to an IP address?
View 9 Replies
View Related
May 11, 2013
I have recently installed a computer system and the Plotter the client is using is a Canon W7200; Canon have refused to release any updated drivers and there were never any previous 64bit drivers that were created for this piece of hardware.
Are there any Universal Plotting Drivers? or a Generic one that can be used with all Canon Plotters?
View 8 Replies
View Related
Aug 30, 2011
The Add-A-Plotter Wizard has become corrupted, and will not run on any computer in the office. We get a message about missing DLLs. I think I used to know how to add plotters "by hand", before the Add-A-Plotter Wizard existed. Can I still do this, and if so, how?
View 1 Replies
View Related
Apr 25, 2012
I've just installed Autocad 2013 and everything seems fine apart from that I cannot select my plotter, when i select it, it just goes back to "none". I've had a play around but nothing seems to work.
View 5 Replies
View Related
Mar 7, 2013
Since we've migrated to Windows 8 64b we have problems wih plotting some layouts. If I select my plotter it automatically goes to none after selecting and sometimes I get the following error message:
Most of the times I can use the plotter in the other layouts / drawings, but sometimes I have to restart AutoCAD or reboot the computer before the plotter works again. In some layouts we keep getting this problem even after reboot. I've tried reinstalling the plotter (with different drivers), tried different computers, purge and recover the drawings but no luck. The Plotter is a HP Designjet 800.
View 1 Replies
View Related
Jul 24, 2012
When Publishing multiple drawings to a Xerox Plotter, only the first sheet prints. Works on the other 3 machines in the office,just not working with the new machine just set up. Can't seem to find anything that would cause this to not print the whole job.
View 1 Replies
View Related
