I just bought a Canon Pixma ip4920 printer, and I use Paint Shop Pro X4 - the problem i'm having is that what I see on scrren and what I get when printing a picture are totally different. My computer is a Dell Inspiron laptop. How to calibrating the colors to match?
View 8 RepliesI've been experiencing a problem when printing borderless on with LR4. Although I'm using borderless print settings, all margins are 0 and cell size is 4x6 or 8x10 or whatever it needs to be, the bottom edge of all photos has a 1-2mm line of unprinted paper.
This is also visible on the print preview of LR4, as you can see on the bottom of the attached image.
I get good colour reproduction from my Canonn Pixma Pro9000 printer with Photoshop managing colour. However when using the XPS driver version (which should give finer gradation of colour), this is not the case. I have been told by Canon that this is because the driver in Photoshop is the basic one, and that I should find the XPS driver on the Adobe site and download it. However, I have been unable to find the driver.
View 3 Replies View RelatedI have a lot of experience as a photographer but none as a printer. I normally work with a dedicated print lab that knows my settings and such, but I bought a Canon Pixma Pro 9500 MkII for printing on the side personal projects.
The thing is, I don't know jack about printing. I do want to learn however. I plan on printing everything from Lightroom in stead of Photoshop since my retouched PSD files end up back in my catalog.
My monitors are all calibrated for color accuracy. How do I set up my printer with Lightroom to get good results and such.
In the Print area, Lightroom 4 says in italics at the bottom to turn off the colour management in the Print Dialog if you're chosing to print with a profile.
how to do this with my Canon Pro9000 mk2 via OSX Lion 10.7?
I shoot with the Canon 40D. The Raw processor in PSPX4 is showing an anomaly when converting my 40D files raw files. When I initially load raw images, and when the image is displayed, it is shown at one setting. Then in 3 seconds, its updated again showing a 1 stop darker, desaturated and less sharper image. Each time I click on another image on the bottom column, same thing. The new image is displayed, then 3 seconds later the same thing happens. There is a noticable difference when I view the same photo in Canon DPP. The PSPX4 Raw File just looks terrible. This does not happen when I edit a JPEG that has already been converted.
How do I stop PSP4X Raw from doing the second update?
I'm a new PaintShop Pro X4 user. I Just downloaded a test version and i'm thinking of buying it, but now there's a slight problem.
I own a new Canon Powershot G1X camera and raw-files shot with it don't seem to open correctly in PaintShop Pro X4. The Colors are all wrong.
have PSP X4. RAW files from my new G15 have colors totally scrambled so I suspect yet another rev of Canon's CR2 format. See CR2 & JPG thumbnails, attached.
Satisfied with X4 and rather not upgrade now. Have installed Canon's "Digital Photo Professional" which correctly reads the CR2s. Rather work in PSP; Canon's app can save RAW as
Exif-TIFF 8bit
TIFF 16bit
and both in combo with Exif-JPEG
will TIFF 16 bit preserve the RAW data and then I could edit in PSP? Other alternatives?
Confirm that X5 does not take into account the xmp side car files when reading a CR2 raw file?
View 4 Replies View Relatedknow if X4 will or does support the RAW files of the Canon 5d Mark3? It's a new camera, and DPP (Canon's own software) is having difficulty processing RAW (Image Softness) from the mk3.
View 2 Replies View RelatedI am running into an issue trying to complete processing of some images. I have converted a Canon CR2 raw file to TIFF, then opened into PSP X4. Now I wish to save as a JPG file. I've flattened & converted to 8-bit RGB. When I go to save it pops up an error stating: "An error has occurred while trying to write to the file". I can save the TIFFs, I can save to PNG, PSP, BMP, and presumably everything else. All except JPG--which is of course what is required. I can create an image from scratch and save to JPG. I've tried simply copying the image and pasting to a new image, then saving with the same error. Same with opening the PSP image back up & trying to save as JPG. I am updated to the latest patch just released.
View 5 Replies View RelatedI'm using Paint Pro X5 and I have a Canon MX700 printer. The colors from my PaintShop pics are awful when I print them. They don't look anything like the picture in PaintShop. Is there a way or a software program I can use to calibrate the colors between PaintShop and my printer so what I print looks like what's on my PaintShop screen?
View 1 Replies View RelatedX4 SP2 is supposed to add RAW support for the Canon S100 and Panasonic FZ150 cameras (I own both.) However, after installing SP2 neither of these RAW file formats can be edited. I tried dumping the Temp folder, but no joy. I tried calling Tech. Support and all I get is "Tech Support is not Available at this time." In the middle of the work day?! The About popup says I'm running Ver. 14.2.0.1. I'm not sure the update has taken.
View 14 Replies View RelatedIs there an easy way (program) to prevent duplicate file names when transferring pics via card readers from multiple Canon EOS devices which all have the same filename format "IMG-xxxx". Specifying downloads to a dated folder name exacerbates the problem when combining the pics into a common folder at a later time. We have been manually renaming but this is becoming burdensome. Was wondering if PSP X4 has a front end downloading program that could handle this.
View 2 Replies View RelatedThe background:
Paint Shop Pro X2 ver. 12.01
Canon CanoScan LiDE 700F with latest drivers ver. 14.0.6.64
Windows 7 64 bit
I have one administrator account and two users accounts (user A and user B) with the same priviledges
The Problem:I can use my scanner smoothly if I log in as either administrator and user A, conversely when I log in as user B PSP tells me "no scanner found".If I log in as user B and run PSP as administrator the scanner is recognized and works properly.When the scanner works, inside PSP - File - Import - Twain origin I see the following window
TWAIN OK
Twain_ok.JPG (17.61 KiB) Viewed 570 times
When I take a picture with the camera rotated to the right the pictures shows up in Windows explore with the picture top on the right. In X2 it also showed with the top on the right. In X3 and X5 the photo is shown with the top on the top, auto-rotated.
When I rotate the picture in X5 or maybe X2 counter clockwise the picture is now shown in Windows Explore correctly, top on top. But when viewed in X5 the picture now appears rotated to the left, the top on the left.
The first job I want to do is work on a series of pictures taken on successive days, and then print them out four to a page to show a consultant. I don't appear to be able to do anything so simple and am astounded.
View 4 Replies View RelatedI am running corel paint-shop photo pro X3,
I was wondering if there is a way to watermark "en masse" meaning i have like 200-300 pictures i need to water mark...
Is it possible to have more than one picture (preferably 2 or 4 and maximum 6) on a full screen at the same time. So that choosing which picture you want to keep is made easier. Now I increase zoom of thumbnails but this leaves a lot of unused space around them including the different tool bars.
View 2 Replies View RelatedI'm using a trial version of Paint Shop Photo 2010, trying to make a simple slide show with music. I downloaded into my laptop from my desktop, 137 pictures already organized and sorted by me and numbered sequentially (using my old faithful, but antiquated PAINT SHOP PHOTO ALBUM ). However!! When I bring this into PSP2010, all the nicely numbered pictures are scrambled! And I can find no way to do a simple file sort by "Name" (i.e. number). I can sort my File Folders by name!! But that does me no good. PSP2010 leaves me with no choice but to hunt each photo from memory (no file nos. are showing now) and drag it into the tray.
View 3 Replies View RelatedThere's a great divide between illustrators and engineers which is showing up in the difficulty of programming 3D printers using an illustration source. I would like to produce bas relief images from digital engravings and photographs but I've encountered several problems.
Problem one is finding a program which looks at an illustration and allows the user to determine where to bend and contour the surface and produces a file which a 3D printer can interpret.
Problem two is that all the present 3D devices are designed to make prototype devices. For bas relief, the Z dimension need only be an inch or two but height and width need to be greater than most 3D machines allow at present.
I raise this subject here because I wonder if Corel are alerted to the idea of producing interpretive 3D software. If the software existed, I feel sure that the hardware would quickly follow.
I have a picture, and I'm putting a circle around it on that picture I want to write Merry Christmas. I thought it would be cute to have the letters alternate between red and green, so the "M" would be red , then the "e" would be green and so on. I also thought this would be easy, but it's not,
First I tried 2 layers the following way. Layer 1 had M r y h i t a and layer 2 had e r C r s m s with layer 1 being red and layer 2 being green, that didn't work.
Now I have a a top layer of "M" in red and the second layer "Me" in green, and it works as long as long as I use a fixed font this seems to work, but I'm wondering if there is an easier way.
Im trying to insert an image just like this one. Do you see how the color is faded into his shirt?
View 1 Replies View RelatedI have a GIF which is displayed as different image in different viewers - on Windows XP and 7.
[URL] - image, original GIF is at 400%, below is shot how it display PSP X2 on XP.
Using PSP 9 on Windows 7
Here's my problem. When people upload pics to my website or when they email them to me, I open them (in Internet Explorer) and they are fine. I then save them and open them in PSP 9 to work on. Problem is, for the past month or so, when I open the images in PSP 9, they are dark, muddy, very flat, and lacking in vibrancy. They are very different from what I see in IE.
When I open them in Corel X3 or in Photoshop, they are just fine, so it must be something in PSP9. Could I have unwittingly changed some setting in PSP 9?
I store all my photos in the directories under the public pictures folder, (C:Users Public Pictures) rather than in my pictures folder in my documents. I do this so that all the users on the system can get to the pictures.
I'm having problems getting Paint Shop Pro to recognize the folder correctly. I have added the c:users public pictures folder to the organizer using the Browse More Folders action and it shows up. However, the Smart Collections don't see any of the files in the folders under this dir.
My overall goal here is to be able to use the timeline feature on all my photos at once, so I want to get all of the photos into the All Pictures smart collection.
I am trying to equating images in the best way in a PSPIMAGE Project. My base image (background) has a dimension of 640 x 480.
I inserted two pictures. By original configuration, picture A (200 x 266) is bigger than picture B (145 x 189).
- If I increase size of picture B (to achieve same size of picture A), this picture will loss quality. Isn't it (I'm not completely sure)?
- So, maybe could be best decrease size of picture A (to achieve same size of picture B). But it will "harm" my main "composition" of dimension 640 x 480.
It seems to be simple but I don't know what to do or by where to begin...
I am looking to cut some pictures out with the specific dimensions of 960x350. I am using the cropping tool (free form), but it does not show me what the dimensions are as I drag it across.
Anyway to set a crop to that size and then I can just move it around the picture till I have it just where I want it?
Is there a way in PSPX5 or X6 to rename a picture (or string of pictures) so that I can have a "Constant such as VACATION_" followed by the create date from the EXIF data as YYYY-MM-DD followed by a sequence number?
View 8 Replies View RelatedI just purchased a new HP photosmart 7520. When I am in print layout, with the printer settings on borderless printing, I still get a border. This doesn't happen on every template - Avery #3268, 3266, new blank sheet, etc. Seems to work properly when using business cards, How do I get it to work properly with no border
View 1 Replies View RelatedIs there an easy way to simply reverse colors in a two color jpg? It is an existing jpg, not one I originally created but have been given permission to use.
View 8 Replies View Related