Lightroom :: Setting Up Canon Pixma Pro 9500 MkII With 5.2?
Dec 27, 2013
I have a lot of experience as a photographer but none as a printer. I normally work with a dedicated print lab that knows my settings and such, but I bought a Canon Pixma Pro 9500 MkII for printing on the side personal projects.
The thing is, I don't know jack about printing. I do want to learn however. I plan on printing everything from Lightroom in stead of Photoshop since my retouched PSD files end up back in my catalog.
My monitors are all calibrated for color accuracy. How do I set up my printer with Lightroom to get good results and such.
View 3 Replies
ADVERTISEMENT
Apr 18, 2012
I've been experiencing a problem when printing borderless on with LR4. Although I'm using borderless print settings, all margins are 0 and cell size is 4x6 or 8x10 or whatever it needs to be, the bottom edge of all photos has a 1-2mm line of unprinted paper.
This is also visible on the print preview of LR4, as you can see on the bottom of the attached image.
View 3 Replies
View Related
May 3, 2013
In the Print area, Lightroom 4 says in italics at the bottom to turn off the colour management in the Print Dialog if you're chosing to print with a profile.
how to do this with my Canon Pro9000 mk2 via OSX Lion 10.7?
View 11 Replies
View Related
Dec 15, 2012
My prints are no longer coming out centered. I have the "center" box checked in the CS6 print dialogue box. The prints are not centered left to right or top to bottom.
This seems to be a problem since I upgraded to CS 6 extended and or newest print driver for my Canon Pro 9500.
I believe that since I did one or both of these changes there is a border (consitst of slanted hash marks around the perimiter of the print dialogue picture) in the preview of the print.The border segments left and right are not equal and are very uneven in width. The top and bottom borders are closer but still not even in width.
View 4 Replies
View Related
Nov 17, 2008
I decided to and have preordered (and prepaid) for a new Canon 5DII
But I was wondering what Adobe's track record has been like in the past for Canon cameras
How long after shipping does it usually take Adobe to get the upgraded ACR out there?
View 1 Replies
View Related
Oct 7, 2010
I went from DV, to AVCHD earlier in the year. I had no luck at all getting one smooth render using AVCHD from my Panasonic camcorder. So when I bought my Canon 5D MKII I thought the HD files would be easier/better to work with. I have edited together some files just for tests with and without crossfades, but both have either resulted in shakey/jerky footage, or the program crashing saying 'send the dump file to Ulead for analysis.
Basically I perform smart proxy to shrink the files to make them smoother to edit, then when I try to render to .mov again, the footage is jerky, but then I can rerender to mpeg2. The problem is that the mpeg2 footage is only about 95% smooth. It will be flowing along then every 5-10 seconds there will be a jump. If I try to render straight to anything else - mpeg2, H.264, MPEG4, it just crashes after 3 seconds giving the same dump file message.
The files the camera produces are
1920x1080 quicktime (.mov)
25fps
48,000KHz, 16 bit, stereo
My hardware is
Sony Vaio laptop
Intel Duo Core 2.2ghz
Windows 7 home premium
64 bit
4GB Ram
Ulead version Pro X3
I have downloaded all the latest patches, and I downloaded the latest Directx (I'm not sure what this is, I just followed the link on the forum for the June 2010 one; is it an automatic thing?)
So I have a decent computer, and fantastic camera, and Ulead's top program - why can't I get a smooth end file??
View 14 Replies
View Related
Jun 24, 2013
I keep getting error messages. I have looked at the updates but wonder if Elements 7 is too old?
View 2 Replies
View Related
Jan 8, 2013
I get good colour reproduction from my Canonn Pixma Pro9000 printer with Photoshop managing colour. However when using the XPS driver version (which should give finer gradation of colour), this is not the case. I have been told by Canon that this is because the driver in Photoshop is the basic one, and that I should find the XPS driver on the Adobe site and download it. However, I have been unable to find the driver.
View 3 Replies
View Related
Nov 2, 2011
I just bought a Canon Pixma ip4920 printer, and I use Paint Shop Pro X4 - the problem i'm having is that what I see on scrren and what I get when printing a picture are totally different. My computer is a Dell Inspiron laptop. How to calibrating the colors to match?
View 8 Replies
View Related
Nov 24, 2012
Is there a profile for Canon lenses 8-15 mm and Canon 800mm ? Where can it be found ?
View 2 Replies
View Related
Aug 18, 2012
Will Lightroom allow tethering with Canon T3i and Canon T4i ?
View 2 Replies
View Related
Feb 2, 2014
I have LR 4 and now I have bought a Canon 70D. Lightroom said it was unable to interpret the RAW files and directed me to get an update. I have updated to 4.4 and still have the same problem. How can I get my RAW files into Lightroom 4?
View 9 Replies
View Related
Jan 27, 2013
Is it possible to import directly to Lightroom 4 via LAN connection? I want to avoid using the Canon EOS utility software as an intermediate step.
View 4 Replies
View Related
Jan 5, 2012
Problem: Connects and works once in 30 or 40 tries. Sometimes shows the camera connection and sometimes it will not. Have changed cables, wiggled cables, used different USB ports, and anything else I could think of to do. When it works, the Tethered Capture window does show all the pertinent info and the shutter release button works. Most of the time, it will at least recognize the camera, but none of the settings and will not download to the computer/Lightroom (as seen below). The camera will shoot and record the image to the internal card... just not to the computer/Lightroom.
I have since run maintenance programs, rebooted, changed to 32 bit, etc......
Equipment: Mac 2.2GHz Intel Core 2 Duo with Mac OS X 10/7.2 using Lightroom 3 (with all updates including Camera Raw), 4 gigs ram, 500 gig hard drive,with 200 gigs open.
View 5 Replies
View Related
Nov 16, 2013
I am testing the trial version of Lightroom 5.2. My new camera is a Canon EOS 70D. When importing RAW files into Lightroom the colors of some photos are wrong. RAWs from my older 450D are fine.
For example on one photo the sky isn't blue but turquoise. When using the DNG Converter I get the same color. The sky was blue though. When opening the file in Digital Photo Professional by Canon, the sky is blue as it should be.
It happens on some other photos as well. Mostly if they have a high blue content. If in Lightroom I increase the blue content and decrease the shades it almost looks as it should.
View 22 Replies
View Related
Jan 24, 2014
Does Lightroom 5.3 FULLY support Canon 70d raw?
View 3 Replies
View Related
May 25, 2013
I am not able to use the tethering with my Canon 5D Mk3, the camera reads busy and I am not able to use any functions on the camera s wel, changing modes, speed, ISO etc.Ihave the newest version of the Canon solution installed and it works there, but not in LR4.
View 5 Replies
View Related
Jun 12, 2012
Or do I have to upgrade to LR4 to work with RAW on 5d mk3?
View 6 Replies
View Related
May 23, 2013
I have a doubt: when importing and converting from Canon RAW (CR2), extract Lightroom ALL COMPLETE information from the original file? I've observed that Canon RAW software display some information like the AF points that doesn't appear in LightRoom. I want to know about this question for better decide if i must convert to DNG and delete original CR2 or include the original RAW in the DNG file (duplicating his size)
View 7 Replies
View Related
Dec 15, 2011
Has LR3.6 addressed the poor processing of 7D raw files ?
View 5 Replies
View Related
Sep 14, 2012
first let me tell you that I'm familiar with LR concepts. I read a lot about RAW processing, color profiles and stuff. It all makes sense to me.
That having said... I'm unfortunatly quite unhappy with LR's color reproduction. It seems technically very accurate; unfortunatly -- Canon's own "Standard Picture Style" (so OOC JPEGs) are in most cases much nicer to look at, color-wise. I know it's not me alone having this feeling (just do a quick search).
Adobe provides look-alike profiles (.DCP-files) which are supposed to imitate Canon's Picture Styles. Unfortunatly none of these Adobe-profiles comes close (enough, IMHO) - most annoying thing for me is a strange blue/green cast in darker areas, e.g. shadows in daylight conditions are too bright and too blueish.
Remember, I'm using a EOS 50D (which probably won't get profile updates any more by Adobe, I suppose...)
So here's my question: Can I assume that Adobe already did the best they can to match Canon's Picture Style? ==> stop dreaming about a "better" "canon-50d-standard.dcp"-file. Take it or leave it, stop crying.
Or is there a possibility to tweak existing profiles? ==> find out how. Adobe's DCP editor, dcptool, whatever?
View 4 Replies
View Related
Jun 14, 2012
Why can't I import Canon G9 time lapse style avi files to mac lightroom 4.1 as I did pre 4?
View 3 Replies
View Related
Dec 26, 2013
Why won't my Canon 70d raw files open in Lightroom 5.3?
View 10 Replies
View Related
Dec 13, 2012
The Canon 6D is not in the current list of supported cameras for tethering in Lightroom. When will Lightroom 4 support tethering for Canon EOS 6D?
View 3 Replies
View Related
Nov 14, 2012
I'm trying to do some work with CR2 raw files from my 30D and the RAW files appear approx 1.33 stops underexposed in Lightroom 3.6.
I have compared with the camera jpg in LR3.6, the camera jpg and CR2 in canon DPP software / Breeze Browser Pro / Picasa.
In Develop > Set default settings ...I see it recognises that it is a canon 30D
View 5 Replies
View Related
Sep 6, 2013
I'm using light room 3 and Photoshop/bridge CS5. I just got a new camera – a Canon 6D and none of the programs will read the files. It is indicated I need a new plug-in to support the camera – camera raw plug-in/supported cameras indicates a 60 is supported. I found a support patch and downloaded: DNGConverter_7_3.exe.part and the application file:DNGConverter_7_3 (the application file size is indicated as 0 kB) Neither Program Will Run under Windows 7 and I still can't open any of the raw files from my Canon 6D camera.
View 1 Replies
View Related
Feb 23, 2014
I have a Canon 6D with built-in GPS. Importing the photos into Lightroom brings in the GPS data automatically, but it doesn't bring in the GPS "log." The "log" is the actual path you've walked (or hiked or biked or driven) while the GPS receiver is on. In Aperture (or Canon software or some others), you can directly import the ".log" file into the program. Seeing your path in a new city (or whatever) is fun. Lightroom appears to only accept .gpx files.
I've found a simple piece of software that converts .log files to .gpx. (It's called HoudahGPS.) But is there an easier or better way to do this? I'm not looking to add steps to my workflow!!
View 10 Replies
View Related
Jun 20, 2012
I cannot download my RAW images from my Canon 5D MK III to LR4.1 Apparently I need the CR 2 version? Very frustrating as I have just bought and downloaded the new LR 4 and updates it. Still can't import the photos and some won't even show a preview.
View 1 Replies
View Related
Jun 1, 2012
Have updated to Lightroom 4.1 so why won't the DNG converter reconize my Canon5D Mark 111 ?
View 2 Replies
View Related
Jan 2, 2013
i have been able to import and move a file of jpegs but as I shoot jpeg/raw combo, the raw files were left behind in the original file. I can now bring them up, but they are dim and cannot appear to do anything w/them. I would like to move them to the file where I put the accompanying jpegs, but am having no success in finding an answer on how to do this. Nothing seems to activite to let me do this. Along w/this, I generally tend to work straight from camera raw files, the jpegs are generally not used, thus when LR encourages me to work on the jpegs, I'm not interested. I wish to process my raw files and only move to PS6 if I need to do some more intensive work.
View 2 Replies
View Related
Feb 6, 2013
System: OSX 10.6.8, mac pro, 8 core, 8 GB ram, multiple 1 TB drives, 6 monitors.
So I found the ad on Adobe that said that the 6D was supported in Lightroom 4.3, and the Lightroom page said that it would work on OSX 10.6.8. So I bought it.
Upon installing it, I find that it cannot see (does not show) 6D RAW files when IMPORT is pressed. It shows JPEGS if I have them in the camera, and it knows the camera is there in the import dialog -- shows its name -- but no RAW files.
I checked for updates to Lightroom 4.3, it says there are none, I'm "up to date."
DPP sees the RAW files fine and imports them. So the USB connection, etc., is working.
I'm sure I'm missing something, and I really need RAW files, not JPEGs.
View 3 Replies
View Related
