I am not able to use the tethering with my Canon 5D Mk3, the camera reads busy and I am not able to use any functions on the camera s wel, changing modes, speed, ISO etc.Ihave the newest version of the Canon solution installed and it works there, but not in LR4.
View 5 Replies
Will Lightroom allow tethering with Canon T3i and Canon T4i ?
View 2 Replies View RelatedThe Canon 6D is not in the current list of supported cameras for tethering in Lightroom. When will Lightroom 4 support tethering for Canon EOS 6D?
View 3 Replies View RelatedI have tried everything to tether my original Canon 5D not the mark series. I love the camera and want to dedicate it to a project. I have to tether so I can see on screen, rename files etc. I connect it and 2 times it recognized the Canon5D, could shoot though. Ive tried everything trashing the preffs, etc. I am on Mac using 10.7.5. Ive even tried to use the Canon Utility to connect, the same problem. Ive seen some posts saying LR4.4 doesnt support the Canon5D anymore.
I would rather put the camera to use rather then buy another to dedicate to this ongoing shoot.
Does Lightroom 5 have camera tethering support for the Canon 6D.
View 1 Replies View RelatedI'm trying to get working tethering mode in LR4 with my Canon 7D and I have "No Camera Detected" in control panel of tethering capture and BUSY indicator is ON on my camera. It works just fine using EOS Utility: I can do shots, change camera settings and so on but I really want this feature inside of LR because of variety of features of LR.
System info from LR is:
Lightroom version: 4.3 [865747]
Operating system: (Build 9200)
Version: 6.2 [9200]
Application architecture: x64
System architecture: x64
[Code]....
I can't finda list of cameras that are supported in LR5. There is a list for LR4but not LR5. In particular I have three cameras that all work withtethering but I don't have any working software to use thisfacility.
Canon G10
Leica DIgilux 2
Both these cameras came with tethering software that was subsequently dissabled in software updates (Not firmware updates)
I also have the EOS-M and for reasons I don'y understand Canon won't let EOS utility operate the camera even though this functionality exists within the camera because CaptureOnesupports EOS-tethering.
I have a shoot next week that I want to use tethering from my Nikon to LR. Is there a way to get one of the camera profiles and the lens profile to be automatically assigned as I shoot and LR imports?
This will get me close enough for the client to preview.
My Camera is not detected using LR4.0 and LR4.1 on my laptop.chatted with Adobe online and did all he/she asked with no luck.Also have done all on the trouble shooting stuff on the Tethering support page.The camera will tether on my desk top computer but not on my Laptop..
View 1 Replies View RelatedI have the latest update of LR 4.1 and newest firmware for my D800, but I start start it says camera not detected. I tried restarting the PC, LR, the camera, etc. several times but nothing.
View 8 Replies View RelatedI just upgraded to LR 4.2...
It DOES see the camera, the camera settings and even triggers the camera. However, the image files are nowhere to be found.
setup of tethering ,from lightroom to Nikon D3200.
View 1 Replies View RelatedI'm having trouble tethering my Nikon D800 to Lightroom 4.4.
Attempts at tethering mostly produce "No Camera Detected" after File > Tethered Capture in Lightroom. There have been some occasions however when the camera was detected and tethering functioned for a short while.
These successful occasions happened using the same approach and equipment.I'm using Windows 7 Home Premium 64bit Version 6.1 (with i7) and both camera and Lightroom have been updated.
Seem to be lots of talk about tethering the D7000 but no one actually says it's working for them. Here is a short run down of what I have done to solve the issue.
Ensured Lightroon is up to date.Ensured my camera has the most current firmwareReset the Lightrooms "preferences" file.Tried different USB portsChecked that the D7000 is on the Adobe list for cameras that can be tethered in LRUSB cable is under a meter long and no USB hub is being used.No other software is running in the background that might control the camera
The camera can be tethered with Nikon's Camera Control Pro 2 with no issues. I am using Windows XP home as an OS. The computer has a AMD Athlon 64x2 dual core processor running at 2.0 GHZ with 3 GB of RAM. Pretty sure we are ok here.
I would really like to use this feature in Lightroom.
I plugged canon 1D mark IV with LR 4.3 for tether shooting. it works great. However, I realized that there is no image save on my CF card. All images were transferred to the computer via tethering. I really want to keep a copy of the card for logistics reason. I couldn't find any setting on LR preference regarding this.
View 8 Replies View RelatedDoes Lightroom support tethering for the sony RX100?
View 1 Replies View Relatedanyway to tether the D3100 with Lightroom 4.1 using Window 7?
View 1 Replies View RelatedI am on LR 4.4 using Nikon D800E.I had been using LR tethered with some intermittent locking issues since LR 3 with my Nikon D300.About 4 months ago, I purchased a Nikon D800E and started to use it tethered (as I had done with the D300) with LR 4.
It would lock up consistently and I would have to reboot the computer to regain functionality. This would happen so many times during a shoot, that tethering just became unusable.
After much testing, It turns out that the problem occurs when the camera's buffer reaches zero. LR consistently is unable to recover from this zero condition. Periodically it will allow one more shot after a bit (as if it tried to recover), but the shot in LR has an esclamation mark by it as damaged data. And at that point it will never recover without a complete computer reboot.
I'm shooting with a team in studio - I can't have LR be this flakey - It is not acceptable to not be able to reach a zero buffer condition while shooting (I'm using Profoto and it can recycle faster than the camera can send to LR). It is not usable in its current state tethered with a Nikon D800. Just not usable.
I had to switch to using Nikon's Camera Control 2 (which functions perfectly and never has trouble recovering from a zero buffer condition), until Adobe can fix this significant bug.
Come on Adobe - Fix your software so it functions.I also noticed that conveniently Adobe removed the functionality of their report a bug link.
Is there a profile for Canon lenses 8-15 mm and Canon 800mm ? Where can it be found ?
View 2 Replies View RelatedThis is incredibly frustrating to have a $2,000+ camera that cannot connect to Lightroom. It really impacts the value of both Lightroom and my camera if they don't talk to each other.
View 12 Replies View RelatedEvery time i try to tether, a box pops up saying lightroom could not tether and try restarting or disconnecting. This happens every time. Ive restarted and disconnected multiple times. All the software is up to date. It was working for a while but then just stopped.
View 1 Replies View RelatedI am running LR 4.2 attempting to shoot in tethered mode to my Nikon D300. The laptop is a Lenovo W510 running windows 7 pro x64 with Intel i7 processor with all microsoft and lenovo updates installed.
When I plug in the camera via the USB port and start LR, the tethered mode shows 'No Camera Detected". If I unplug the cable from my laptop and plug it into my Dell Desktop running the same version of windows and the same version of LR, it recognized the camera and will shoot tethered mode just fine. However, the real need is to shoot tethered to my laptop.
I have been through the idiot troubleshoot list on Adobe's website and tried every combination of restarting known to man. I know the camera is in the right USB mode since it works just fine when plugged into my desktop. So, I can eliminate any problem with Nikon, USB cables, LR versions/camera compatibility. The only variable is the Lenovo vs. Dell and possible USB driver issues. Windows does recognize the camera when it is plugged into the laptop, but LR doesn't see it.
I am trying to set up auto importing by tethered shooting with a Canon 1Ds (but don't think brand and camera matter.)
I never use DNG, and am not aware of, and after a lot of searching, cannot find anywhere in the LR4.3 preferences at which I specified DNG conversion. In the Auto0Import dialog there is a File-handling tab that offers one choice: how to spell the dng suffix. The files I want to import will come in as CR2., and testing this with other folder destinations and with Canon's EOS Utility prove that the camera is "sending" CR2 files.
I have LR 4 and now I have bought a Canon 70D. Lightroom said it was unable to interpret the RAW files and directed me to get an update. I have updated to 4.4 and still have the same problem. How can I get my RAW files into Lightroom 4?
View 9 Replies View RelatedIs it possible to import directly to Lightroom 4 via LAN connection? I want to avoid using the Canon EOS utility software as an intermediate step.
View 4 Replies View RelatedProblem: Connects and works once in 30 or 40 tries. Sometimes shows the camera connection and sometimes it will not. Have changed cables, wiggled cables, used different USB ports, and anything else I could think of to do. When it works, the Tethered Capture window does show all the pertinent info and the shutter release button works. Most of the time, it will at least recognize the camera, but none of the settings and will not download to the computer/Lightroom (as seen below). The camera will shoot and record the image to the internal card... just not to the computer/Lightroom.
I have since run maintenance programs, rebooted, changed to 32 bit, etc......
Equipment: Mac 2.2GHz Intel Core 2 Duo with Mac OS X 10/7.2 using Lightroom 3 (with all updates including Camera Raw), 4 gigs ram, 500 gig hard drive,with 200 gigs open.
I am testing the trial version of Lightroom 5.2. My new camera is a Canon EOS 70D. When importing RAW files into Lightroom the colors of some photos are wrong. RAWs from my older 450D are fine.
For example on one photo the sky isn't blue but turquoise. When using the DNG Converter I get the same color. The sky was blue though. When opening the file in Digital Photo Professional by Canon, the sky is blue as it should be.
It happens on some other photos as well. Mostly if they have a high blue content. If in Lightroom I increase the blue content and decrease the shades it almost looks as it should.
Does Lightroom 5.3 FULLY support Canon 70d raw?
View 3 Replies View RelatedOr do I have to upgrade to LR4 to work with RAW on 5d mk3?
View 6 Replies View RelatedI have a doubt: when importing and converting from Canon RAW (CR2), extract Lightroom ALL COMPLETE information from the original file? I've observed that Canon RAW software display some information like the AF points that doesn't appear in LightRoom. I want to know about this question for better decide if i must convert to DNG and delete original CR2 or include the original RAW in the DNG file (duplicating his size)
View 7 Replies View RelatedHas LR3.6 addressed the poor processing of 7D raw files ?
View 5 Replies View Related
