I have the latest update of LR 4.1 and newest firmware for my D800, but I start start it says camera not detected. I tried restarting the PC, LR, the camera, etc. several times but nothing.
View 8 RepliesI'm having trouble tethering my Nikon D800 to Lightroom 4.4.
Attempts at tethering mostly produce "No Camera Detected" after File > Tethered Capture in Lightroom. There have been some occasions however when the camera was detected and tethering functioned for a short while.
These successful occasions happened using the same approach and equipment.I'm using Windows 7 Home Premium 64bit Version 6.1 (with i7) and both camera and Lightroom have been updated.
I am on LR 4.4 using Nikon D800E.I had been using LR tethered with some intermittent locking issues since LR 3 with my Nikon D300.About 4 months ago, I purchased a Nikon D800E and started to use it tethered (as I had done with the D300) with LR 4.
It would lock up consistently and I would have to reboot the computer to regain functionality. This would happen so many times during a shoot, that tethering just became unusable.
After much testing, It turns out that the problem occurs when the camera's buffer reaches zero. LR consistently is unable to recover from this zero condition. Periodically it will allow one more shot after a bit (as if it tried to recover), but the shot in LR has an esclamation mark by it as damaged data. And at that point it will never recover without a complete computer reboot.
I'm shooting with a team in studio - I can't have LR be this flakey - It is not acceptable to not be able to reach a zero buffer condition while shooting (I'm using Profoto and it can recycle faster than the camera can send to LR). It is not usable in its current state tethered with a Nikon D800. Just not usable.
I had to switch to using Nikon's Camera Control 2 (which functions perfectly and never has trouble recovering from a zero buffer condition), until Adobe can fix this significant bug.
Come on Adobe - Fix your software so it functions.I also noticed that conveniently Adobe removed the functionality of their report a bug link.
I am not able to use the tethering with my Canon 5D Mk3, the camera reads busy and I am not able to use any functions on the camera s wel, changing modes, speed, ISO etc.Ihave the newest version of the Canon solution installed and it works there, but not in LR4.
View 5 Replies View RelatedI can't finda list of cameras that are supported in LR5. There is a list for LR4but not LR5. In particular I have three cameras that all work withtethering but I don't have any working software to use thisfacility.
Canon G10
Leica DIgilux 2
Both these cameras came with tethering software that was subsequently dissabled in software updates (Not firmware updates)
I also have the EOS-M and for reasons I don'y understand Canon won't let EOS utility operate the camera even though this functionality exists within the camera because CaptureOnesupports EOS-tethering.
Lightroom 4 only detects Photoshop cs2, not cs5, so I can't jump over to cs5 for further editting. Is there an easy way to correct this? I assume it is because cs2 was installed after cs5 (don't ask, it wasn't me!)
View 1 Replies View RelatedI have a shoot next week that I want to use tethering from my Nikon to LR. Is there a way to get one of the camera profiles and the lens profile to be automatically assigned as I shoot and LR imports?
This will get me close enough for the client to preview.
My Camera is not detected using LR4.0 and LR4.1 on my laptop.chatted with Adobe online and did all he/she asked with no luck.Also have done all on the trouble shooting stuff on the Tethering support page.The camera will tether on my desk top computer but not on my Laptop..
View 1 Replies View RelatedThe Canon 6D is not in the current list of supported cameras for tethering in Lightroom. When will Lightroom 4 support tethering for Canon EOS 6D?
View 3 Replies View RelatedI have tried everything to tether my original Canon 5D not the mark series. I love the camera and want to dedicate it to a project. I have to tether so I can see on screen, rename files etc. I connect it and 2 times it recognized the Canon5D, could shoot though. Ive tried everything trashing the preffs, etc. I am on Mac using 10.7.5. Ive even tried to use the Canon Utility to connect, the same problem. Ive seen some posts saying LR4.4 doesnt support the Canon5D anymore.
I would rather put the camera to use rather then buy another to dedicate to this ongoing shoot.
I just upgraded to LR 4.2...
It DOES see the camera, the camera settings and even triggers the camera. However, the image files are nowhere to be found.
setup of tethering ,from lightroom to Nikon D3200.
View 1 Replies View RelatedSeem to be lots of talk about tethering the D7000 but no one actually says it's working for them. Here is a short run down of what I have done to solve the issue.
Ensured Lightroon is up to date.Ensured my camera has the most current firmwareReset the Lightrooms "preferences" file.Tried different USB portsChecked that the D7000 is on the Adobe list for cameras that can be tethered in LRUSB cable is under a meter long and no USB hub is being used.No other software is running in the background that might control the camera
The camera can be tethered with Nikon's Camera Control Pro 2 with no issues. I am using Windows XP home as an OS. The computer has a AMD Athlon 64x2 dual core processor running at 2.0 GHZ with 3 GB of RAM. Pretty sure we are ok here.
I would really like to use this feature in Lightroom.
I plugged canon 1D mark IV with LR 4.3 for tether shooting. it works great. However, I realized that there is no image save on my CF card. All images were transferred to the computer via tethering. I really want to keep a copy of the card for logistics reason. I couldn't find any setting on LR preference regarding this.
View 8 Replies View RelatedDoes Lightroom support tethering for the sony RX100?
View 1 Replies View RelatedDoes Lightroom 5 have camera tethering support for the Canon 6D.
View 1 Replies View Relatedanyway to tether the D3100 with Lightroom 4.1 using Window 7?
View 1 Replies View RelatedI'm trying to get working tethering mode in LR4 with my Canon 7D and I have "No Camera Detected" in control panel of tethering capture and BUSY indicator is ON on my camera. It works just fine using EOS Utility: I can do shots, change camera settings and so on but I really want this feature inside of LR because of variety of features of LR.
System info from LR is:
Lightroom version: 4.3 [865747]
Operating system: (Build 9200)
Version: 6.2 [9200]
Application architecture: x64
System architecture: x64
[Code]....
This is incredibly frustrating to have a $2,000+ camera that cannot connect to Lightroom. It really impacts the value of both Lightroom and my camera if they don't talk to each other.
View 12 Replies View RelatedEvery time i try to tether, a box pops up saying lightroom could not tether and try restarting or disconnecting. This happens every time. Ive restarted and disconnected multiple times. All the software is up to date. It was working for a while but then just stopped.
View 1 Replies View RelatedI am running LR 4.2 attempting to shoot in tethered mode to my Nikon D300. The laptop is a Lenovo W510 running windows 7 pro x64 with Intel i7 processor with all microsoft and lenovo updates installed.
When I plug in the camera via the USB port and start LR, the tethered mode shows 'No Camera Detected". If I unplug the cable from my laptop and plug it into my Dell Desktop running the same version of windows and the same version of LR, it recognized the camera and will shoot tethered mode just fine. However, the real need is to shoot tethered to my laptop.
I have been through the idiot troubleshoot list on Adobe's website and tried every combination of restarting known to man. I know the camera is in the right USB mode since it works just fine when plugged into my desktop. So, I can eliminate any problem with Nikon, USB cables, LR versions/camera compatibility. The only variable is the Lenovo vs. Dell and possible USB driver issues. Windows does recognize the camera when it is plugged into the laptop, but LR doesn't see it.
Photos from D800 look totally diffent on LR4 program. Do I need any color management setting on LR4 particular to D800?
View 1 Replies View RelatedWhen will I be able to tether my Nikon D800 to Lightroom 4.1?
View 6 Replies View RelatedWhen will tethered capture support be avaialble for the D800 and D4?
View 5 Replies View RelatedI just got LR 4.1 But it wont read my RAW files from my nikon D800 what can I do? (this is for mac)
View 3 Replies View RelatedUpon importing raw images from D800 into LR5, some of the images appear as pixelated (kind of like what u see sometimes before the image gets completely rendered). Are these corrupted? Is it my card or the import process or my camera?
View 4 Replies View RelatedSo i have USB3 and USB2 on a lenovo laptop running windows 8 and lightroom 5,2. I have the tether plugin enabled and I connect the camera to several usb cables made for tethering. The camera show up in windows as the D800 however lighttroom does not see it and says it can't find a camera when i enable etherd shooting. I have tried several cables, all the ports with all the cables. I have taken out the memory cards and tried in many modes and still no camera in lightroom so i can't shoot tehered.
View 9 Replies View RelatedLightroom will not read Nikon D800 NEF files. I have updated lightroom twice, first to 4.1 and second to 4.2 and in neither case would the files import. I have read several forum entries that say these files are compatible with Lightroom and/or to update Lightroom.
View 15 Replies View RelatedI try to import my d800 nef files and Lightroom does not recognize them and will not import. I looked on the site and it SAYS it supports them but nothing. I looked for a raw plugin but when I clicked the link it would not go anywhere. I don't want to shoot my wedding with this camera if LR can't support it and I have to return it to the camera store FAST if not.
View 12 Replies View RelatedLightroom 3.6 64 Bit does not import/open RAW-Files of the camera Nikon D800. What can I do?
View 2 Replies View RelatedWhen I use Lightroom 3.6 with pictures from Nikon D800, the lens profile for the Mikro Nikor 60 mm lens is not in the list of coice. However, when the picture is from a Nikon D5000, the same lens appears in the list. So, a lens profile exists, but is not open for pictures from the D800. The same is true for the 18-200 mm lens, which however is not suited for the D800 due to heavy vignetting at wide angle, and with the 70-300 mm, which gives good results.
View 5 Replies View Related