I'm trying to plot drawings through DWG to PDF.pc3, it works fine & opens up.But it skips the save dialog box and automatically saves in my local setting/temp folder with alpha-numeric name.
View 4 RepliesSo I have the educational version of ACAD 2012 and this is my first time using that version. My model is done and I formatted my layout with a border and the model to scale in the viewport. When I go to plot to PDF, all I see is the border. I've tried fiddling with colors and viewports but neither of those did anything.
View 3 Replies View RelatedI work with autocad 2011 and my problem is the following.
When my 3D vieuwport is properly set in my layout page. I try to plot my layout. when i've compledet my plotsettings I first check out that everyting is ok. and evrything looks great. but when I plot everything is plotted exept the 3D drawing. althoug the 3d drawing is shown on the plot preview. (look at pdf's to see what I mean).
Actual-Plot_3D.pdf
Plot-preview_3D.pdf
I am trying to write some VBA code to print several drawings present in a folder.
I am not a VBA expert. I wrote some little macros in excel but it is the first one in Autocad.
I have a small code that opens a drawing, counts it, closes it and then loops for other drawings.
I have a code that print a drawing by defining some printing parameters.
Separately, both work. But when I call the second one into the loop, I get a error:
"Run-time error '-2147418111 (800100001)':
Automation error
Call was rejected by callee."
I'm using Windows 7 and Autocad 2012.
See my code below:
Option Explicit
Dim filename As String
Dim filepath As String
Dim full_filename As String
Dim i As Integer
Sub print_trial()
[Code] ......
I'm trying to plot my drawings and have all my line weights be the same in the final plot so that no line is more bold than another. I do custom home designs and am now adding in additional information that uses different colors for appliances, plumbing, etc.
I'm using the standard red, cyan, magenta, green, 252 gray scale colors, however, when I plot, all of the lines except red are thick and make the objects entirely too bold for my purposes. How do I fix this other than changing everything to red? I didn't have this problem when I worked with AutoCAD 2006 at my old company (we had drafters set up this stuff for us), but now that I'm on my own and trying to get my own plotting figured out, I'm struggling.
I attached an example for reference. It's the windows (gray scaled), plumbing fixtures (cyan), and appliances (magenta) that come out entirely too dark.
Whenever I plot the 3d drawings in PDF or in our plotter, Some lines or some drawings are not shown in the printed layout. sample.jpg. try to check the red circle, there should be other stuff inside it. and in the second circle the one with the line should have a line itself, i just put some red lines to show in the drawing, but please try to check all.
View 3 Replies View RelatedI am trying to plot multiple drawings all at once. I work with many drawing sizes varies from size A to size E. What would be the best way to plot all drawings to 11 X 17 paper no matter what size the drawings are set to? These drawings are not xref or anything. They all are separated files. I tried using Set Sheet Manager; it will only plot to whatever that size is. I want all drawings to be plotted on 11 X 17. I did some research in the forums here and was not able to find what I was looking for.
View 2 Replies View RelatedI have drawings with annotation and when I send to the plotter the processing is very slow, and take some time to plot.
View 1 Replies View RelatedIs it possible to plot (or print) all sub assemblies or parts drawings into separate pages by code?
I do not want to open and print every parts. One code and print all... Is it possible?
When I attempt to plot one or more of my drawings in model view to pdf the plot will show gaps in between the edge of the paper and my border. The plot will vary per drawing but limited to the ledger and tabloid paper size, the plot area is set to window for the area the border contains, and the plot scale is fit to paper.
View 9 Replies View RelatedIs is possible to "que" a bunch of drawings to be plotted? I would like to be able to open a drawing and plot it, then while it's plotting, open another drawing and plot it, then another and so on and so on. However, I get an error message stating that another plot is in process and only one plot or publish process can be active at one time. Thus, I'm forced to wait for the last one to complete before sending the next one to the plotter.
View 4 Replies View RelatedI have a stationing line. I've used the block PTTICL to make ticks. The ticks display perfectly. I'll run through a plot preview and the ticks show on the plot preview. I push plot go to the printer and the ticks are not plotted.
I've checked the layer. They are on a layer that should print.
I've checked the block. The block is created on a layer that should print.
I've run through a number of options regarding the alignment label properties and found "display" to be equal to "true."
Everything else plots just fine. Only the station label ticks refuse to plot. My project is fairly short so the work around was to put a poly line right on top of the tick mark.
AutoCAD Civil 3D 2013.
I am fairly new to AutoCAD. I have a AutoCAD drawing file containing 8 drawings on it. What I would like to do is to print each drawing to a single PDF pages.
View 1 Replies View RelatedI am trying to publish a set of four drawings to a Canon ipf750. I want to make two collated sets. So far I can't get any plot at all.
View 6 Replies View RelatedIs there a way to increase the access time so printing is faster?
I have AutoCAD 2013 and access drawings over VPN (6 meg pipe).
Both opening the drawings and especially printing them take a very long time.
It takes about 8 seconds to open drawings, due to all the modules loading on the bottom-left of AutoCAD. Printing takes even longer than opening the drawings.
Is there a setting I can change to speed-up access time?
I'd like to batch plot 50 drawings, all of which have the same title block in the same position. This is easy with the PUBLISH command, but I'd like to be able to add a "stamp" of the customer logo to these drawings, which I have as a block in a separate file. Basically I want to easily be able to plot the same drawings for different customers, the only difference being the customer logo. Is this possible?
View 1 Replies View RelatedI don't remember ever using this checkbox on the Publish dialog box but today i want to and i can't figure out how to make it work. The help file ~seems~ to say that if i select this, the contents of all open documents (layouts and/or model space) are automatically loaded.... but they don't.
I know i can pick the Add Sheets button and manually select all the drawings i have open but doesn't that defeat the purpose of this checkbox?
Is there a way to plot multiple drawings in Acad 2009 without opening each drawing file?
View 1 Replies View RelatedWhen we print from a read-only drawing file that is stored on our local drawing fileserver (a PC on our network that is used to store all finished drawing files) it can take several minutes to open the Plot screen and several more minutes to actually print the drawing. It doesn't matter which printer we use to print to. Some of us have had this problem since AutoCAD 2010 but some have had it only since 2013. However if we use an old AutoCAD 2007 there is no printing delay problem so the server doesn't seem to be the source of the problem.
If we print from a drawing file on our own systems (which is actually working off a local network server unless the server is down then we are working off our own computers that will re-sync with the server when it comes back on line) then there is no delay. I have made some local files read-only to see if that was the trigger but no, they printed just fine.
Lately when I plot my drawings the diagonal lines plot gray. I didn't change the line color. Can't figure it out.
View 1 Replies View RelatedWhen I am printing from AutoCAD LT 2012, I randomly get this error message every 10 to 15 drawings that I print. Considering that I print 10-15 drawings at one time, I am getting a fatal error every time I print a set. Why? I don't get this error when printing in AutoCAD 2011LT or 2012 Full Version.
View 1 Replies View RelatedJust curious as to whether people use much colour in their production drawings, particularly for hatches...?
Working for Local Government, we tend to utilise colour hatches to show all kinds of information.
Generally, we have found that colour hatches are a good way to clearly show different areas and materials such as pavements, paths, landscape areas etc. Hatches can then be used to quickly ascertain areas for estimation and our construction team like them too as the plans tend to be easier to read.
The usual arguments about reproduction of plans and slowing down of computers doesn't seem to be an issue for us. Most photocopiers are in colour now anyway and we just make sure that even in black & white the plans are readable.
The way that Civil 3D deals with hatching doesn't seem to slow things down for us either.
Currently using Civil 3D 2013 & 2014 SP1
I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
How does one convert an stb file to ctb. I have tried using the CONVERTPSTYLES command to no avail. After selecting the stb for conversion, i am getting an error message stating that the stb does not contain a color mapping table and cannot be used to convert drawings.
View 9 Replies View RelatedAs Autodesk has not made changes that prevent excess registered application ID's from spreading from xref to sheets, I am guessing many companies have the issue and do not know it.
Its been a while since I worked with a crowd of highway designers whose attitude was AutoCad was AutoCrud (I was offended too), but I would bet the crop of people doing caltrans work is a bit new to the wild west of dwg issues.
I would encourage some of you out there to try this code on your drawing and see if you get more than say, 4000:
(vla-get-count (vla-get-registeredapplications (vla-get-activedocument (vlax-get-acad-object))))You can also run that on dwg's without opening fully in the editor, if you want to list app id counts for entire projects fast.
Simply cleaning app ids is not good enough to deal with the problem, you must discover where they come from, and catching them dirty is the best way. It alsways some consultant...never H&A though..Maybe if the Caltrans group discovers the issue, we can get movement by Autodesk on a real fix.They have done ok at cleaning tools so far, but its a big waste of time and file space. URL.....
I am looking for some general feedback on where the majority of people annotate there drawings. I was in a CAD meeting discussing our new CAD standards that we will be rolling out on Jan 1, 2014. A major improvement I recommended to the plans was to place our annotations in our XREF drawings instead of placing them in model space of our sheet sets. (Our sheet sets are our drawings that have our titlblocks that we plot from ). So, I am asking where do the majority of CAD users like toad annotations to there drawings? PaperSpace, model space, xref’s, etc. and why they do it that way?
I should also state that we are transitioning from 2012 software to Civil3d 2014 software too.
I get the attached when opening certain drawings which fails to load my acaddoc.lsp and so several useful lisps don't get loaded.
a successful drawing opening shows the following
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I'm running 2013 C3D and have a quirk that my drawings zoom out when I first open the file. I'm not even sure what they are zooming out to as it is not 'Extents'.
View 9 Replies View RelatedToday, my question is about sheet set manager for civil 3D drawings.When I doing create sheet set, in the 3rd step "Choose Layouts", I browse the folder which is stored my all of drawings into the sheet set manager dialogue window. But only part of drawings inserted. All of Civil 3D drawing (included plans and profiles) did not into it
View 6 Replies View RelatedSo I have just finished up a project and now need to send the files (all of them, surfaces, alignments, corridor, construction documents, etc) to the client. What is the best way to do this?
I am confused because Civil3d uses Data references that are created based on a folder I specify which the client will not have access to and so on.
I opened my alignment file and did a DXFOUT than went ahead and opened that dxf and saw that there was nothing there?
Could they recreate the stuff I have done using DWFs?? or should I Etransmit?? or what other options do I have?
I am new to Civil 3d, and have just completed the first pass on a design that includes several corridors. I am confused on the best way to prepare actual drawings.
I initially thought that plan production would be useful, however it seems that these are fixed. It seems odd that draft drawings cannot be present for review and editing. Is this correct or am I missing something?
It also seems like a huge task to generate the styles required to present the corridor in an appropriate format for a drawing, let alone several drawings that may have different requirements - in particular for a new comer who would not have set up the range of styles.
Therefore I consider two approaches are feasable - XREF the corridor or Extract Polylines.
I now think the best way to prepare drawings is to export polylines of the key components of the corridor and prepare drawings using this. This would be combined with the alignment, pipe and surface data, that can be used in the drawings via Data Short Cuts.