AutoCAD Civil 3D :: Message When Opening Certain Drawings?
Mar 8, 2013
I get the attached when opening certain drawings which fails to load my acaddoc.lsp and so several useful lisps don't get loaded.
a successful drawing opening shows the following
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 9 Replies
ADVERTISEMENT
Sep 27, 2013
I just recently had to install 2009 from map 2008. When I open drawings last worked on and saved in 2008 and open them in civil 3d 2009, I get drawings that freeze up upon opening. Some will eventually open, showing errors. Others will never open and just freeze up.
View 2 Replies
View Related
Dec 11, 2013
I'm having an issue with my cad files that were done with Civil 3D 2012. When we made the jump to Civil 3D 2014 all my drawings seem to be corrupt. Now I have pipe networks in my base file. I have tired recovering and recoverall but no luck. I can send the CAD file.
View 1 Replies
View Related
Aug 7, 2013
I am running the new auto cad civil 3d 2014, downloaded from the design suite premium. I have left all of the programs installed (as a I saw that a few people chose to uninstall several of the programs). I am running auto cad on an @xi workstation, 4.1ghz processor, 16gb corsair vengence heatspred ram, 240gb ssd operating drive, 2tb storage raid 0 configuration storage drives, NVIDIA K2000 graphics card. It took me a while to configure the graphics settings within auto cad due to the high resolution, text is being portayed as small in some cases, commands are huge in others.
I am still adjusting all of those, however my real problem is that when I open certain drawings the program immediatly goes to not responding, and when I am working back and forth and trying to open multiple drawings it does the same. Just opening the program off of my desktop on a cold-start up takes maybe 15 seconds to be fully functional, the same with certain drawings. However others just seem to not want to be opened. This occurs with drawings large and small. Some large drawings open perfectly while some small ones crash, and vice versa. What could be the cause of this?
View 2 Replies
View Related
Feb 1, 2012
The configured Heidi Driver cannot be loaded. Switching to default software.
View 3 Replies
View Related
Feb 20, 2012
Opening AutoCAD LT this morning no problem. Closed it down and then opened it up again about 10 to 15mins later and get this message (see attached pdf).
Windows XP.
View 5 Replies
View Related
Dec 30, 2011
This error message (see attached) pop up, when I open more than 2 or 3 dwg files in autocad.
I am not sure how to correct it. I have a Windows 7 pro x64 system running Inventor 2012
View 1 Replies
View Related
Nov 11, 2013
most times i have to work on multiple drawings. i open these drawings all at once, but due to their size, it takes some time to open all the files. It would be nice if autocad would stay in the background while opening rather than forcing itself to be the focused programs after each file is opened. this really destroys the ability to multitask and honestly just seems arrogant at this point...
View 3 Replies
View Related
May 23, 2013
I modified a routine that processed xref names & paths w/in a set of folders. Thie original version would open each drawing & do its thing. THis would take about 20 minutes (aprroximately 90 files). I modified it to work w/o opening each drawing. This still takes about 20 minutes.
I would have though that not avtually opeing each drawing would dramitically decrease the overall time required to run this routine.
View 5 Replies
View Related
May 23, 2012
how to remove following message which appears when i open new / file existing file. This also changes my settings and autocad does not work properly.
View 4 Replies
View Related
Dec 2, 2012
I've been getting this fatal error message upon opening files.
It seems to be as I try to load x-ref's.
View 1 Replies
View Related
Jun 26, 2013
When I open a drawing in Autocad 2014, the drawing name opens as drawing1 or drawing2, etc. The files have been saved with a drawing name, however when I open them after saving they open as a unsaved file.
View 1 Replies
View Related
Feb 24, 2012
I have been given a new lap top plus the updated AutoCAD rev. 2012.Supposedly it is superior to my old laptop but... it runs slower, the mouse action is awful, it's like stirring cold porridge.
Anyway, I have spent the first week battling with various bits, trying to get it to look & feel like my previous laptop using 2010.
The big issue I have is upon start up. Rather than loading the standard AutoCAD "drawing 1" regardless, I want to have the browser open up so I can select the' previous drawings loaded on my last session or select a new drawing or browse folders to find the drawing I want.
how I managed to switch this on, back when I managed it on 2010 version.I have given up on running up & down the menus.
View 3 Replies
View Related
Jan 25, 2012
I receive this pop up message every time I open a drawing. How to stop this from happening??
Not sure what info you may need I'm running windows 7 with autocad 2010. I also have autocad 2005 loaded on the same machine and this box does not appear when opening drawings with it.
View 5 Replies
View Related
Oct 26, 2012
Im not talking about osnap, I am talkin about snap which limits your cursor. When I open exisitng drawings, some of them have snap turned on and it is bothering me. Is there a way to adjust your settings to always have snap turned off?
View 1 Replies
View Related
Jun 28, 2013
Rscently upgraded from xp to win 8, re installed autocad 2011.
Now when I try to open a drawing from within autocad my system crashes, I get a flash of horizontal lines then two blank screens.
Tried running narrator but just get static through the speakers, I have to hit the re start button to get back in.
I can open a drawing from explorer if autocad is not allready running, autocad starts and the drawing opens with no problems. but if I try to open another drawing we crash.
View 3 Replies
View Related
Oct 20, 2011
OK then update. I select never show this message agian ever (my favorite ) - but guess what a it pops back up. Nothing is wrong with the assembly
View 1 Replies
View Related
Nov 16, 2012
I am facing problem in my AutoCAD2013 (Ultimate version) -
1.While opening any file an alert message is appearing on the screen, for closing the same I Have to use ( X) close many times.
2 After opening the file every time I have to set the AUTOcad default setting once again, it is taking too much time,
I am not in a position to format my PC now, The snap shot is attached herewith.
View 1 Replies
View Related
Aug 22, 2011
I have AutoCad LT and I can't find a way to scroll through folders full of drawings without opening each one. I have the Autocad Viewer but I can't find a way to make it do this, what are you pros doing, I know there has to be something out there. The rest of the world has way to view file i.e. Photoshop has Bridge, Nikon Has View NX, I do photography and there's a ton of ways to view images even at full res .
View 9 Replies
View Related
Jul 10, 2012
I have a problem with my autocad. The administrator started me out on AutoCAD 2012 global.
The problem existed then so. Now he has me on AutoCAD 2012 Imperial . The problem still exists.
When I open an existing drawing that I have never opened with my version of Autocad. It opens the drawing in Metric units. I do not want Metric units. I would like it in Imperial units. Every time I open an existing drawing, I have to change the units to Architectural.
View 4 Replies
View Related
Nov 8, 2011
When I give the open command, it takes 3 to 5 minuites just to get the file selection dialog box. I am running Windows 7.
View 8 Replies
View Related
Jan 26, 2012
I've recently run into a problem that involves xrefs. Basically, I cannot open files that are being xrefed in other drawings when those drawings are currently open. AutoCAD Architecture will only allow me to open the xrefed file as a read-only version. For example:
I have 1ST FLOOR PLAN (drawing file) xrefed into A-201.00 FIRST FLOOR PLAN (sheet file). If one of my team members has the sheet file open with the drawing file loaded, then AutoCAD will only let me open the drawing file as a read-only file. But if my team member has the sheet file open with the drawing file unloaded, then I can open the drawing file without any problems.
I have never had this type of problem with xrefs before and so I'm wondering if it's an AutoCAD Architecture 2012 bug.
View 2 Replies
View Related
Apr 5, 2013
I have a customer who uses Solid Works and I of course have Inventor 2013. Before I get into discussion with them about software compatability I wanted to ask the experts! Can I open Solid Works drawings with Inventor?
View 6 Replies
View Related
Sep 29, 2011
We have used Inventor 2010 with PSP 2011.
- Recently we have upgrade to Inventor 2012.
- Installed pspro_cad_fp_10.0.39.3 update for PSP Server and for PSP Clients.
And now, some drawings we can not open in Inventor 2012. Inventor crashes!
But some drawings we are lucky to be able to open and work with.
Drawings have the same template.
If the drawing is locked (read only) then inventor 2012 can open it without a crash.
If I drag&drop drawing out from PSP onto my Desktop, Inventor 2012 can open drawing without problems.
So we are not able to work with some drawings in Inventor 2012 and PSP 2011.
As the first and quick (and 100%) solution - rollback to Inventor 2010 can cost us about 5 man-days of work. (Because we have done some work in Inventor 2012 allready and will not be able to work with this in Inventor 2010)
View 4 Replies
View Related
Aug 13, 2013
Is there a way to increase the access time so printing is faster?
I have AutoCAD 2013 and access drawings over VPN (6 meg pipe).
Both opening the drawings and especially printing them take a very long time.
It takes about 8 seconds to open drawings, due to all the modules loading on the bottom-left of AutoCAD. Printing takes even longer than opening the drawings.
Is there a setting I can change to speed-up access time?
View 5 Replies
View Related
Feb 22, 2012
When ever i open a dwg file (it contains Xref files) it's take a long time to open... and i tried the same file to open in Autocad 2007, it's opened with in a second.... and also note that the Autocad 2007 installed in a Dual core pc with 4gb RAM.. and the 2012 is installed in Core i7 12gb ram with NVIDIA graphics card.. and it's 64 bit Windows 7 too.. When i try to open a file it's shows "Loading c:/ ....... base.dwg, etc.. ..
View 8 Replies
View Related
Apr 12, 2013
For the past 2 days when I switch from one drawing to another, my layout tabs are not updating and stay the same as the previous drawings. I have to do a regen to get the proper tabs in place. All the layouts are there...it is just the tabs that are messed up. Once I click on one of the tabs they straighten themselves out as well, but on that first selection I never get the correct drawing that I want!
View 6 Replies
View Related
May 26, 2011
Is there a way to plot multiple drawings in Acad 2009 without opening each drawing file?
View 1 Replies
View Related
Jun 14, 2013
To open .cal drawings, I've alway hit the "insert" tab and selected insert raster image from the dropdown menu.
Today, the "insert" tab doesn't create a dropdown menu. It opens a whole "insert" toolbar without any reference to raster images.
How do I open my .cal files and why did autoCAD change itself?
View 4 Replies
View Related
Jan 10, 2009
I have Vista Home Premium, 32 bit. I've downloaded the trial version of Photoshop CS4 (I'm a first-time user of this program), but on opening it I always receive an 'Owl Orphanage' message (in Italian; I have the Italian version of Vista) telling me that it is impossible to find the file M2000Twn.dll. Photoshop nevertheless opens, but this message is annoying. Is there any way to stop it from appearing. I've done a search, and the driver M2000Twn.dll is in fact present on my computer.
View 6 Replies
View Related
Oct 28, 2008
Had no problem installing the PS CS4 (update from CS3). On opening PS the first time, and every time after, I receive an error message:
"OWL Orphanage: Photoshop.exe - entry point not found."
This is followed by a bunch of numbers or addresses. After I shut the message, the program opens normally, and as farr as I've explored it, functions OK. Haven't had time to really explore things.
Any idea what is producing this message?
View 39 Replies
View Related