I have a customer who uses Solid Works and I of course have Inventor 2013. Before I get into discussion with them about software compatability I wanted to ask the experts! Can I open Solid Works drawings with Inventor?
View 6 RepliesI've been trying to import a Solidworks file (.SLDASM) into AutoCAD 2013. The documentation says this is a valid file type, but it doesn't seem to work The import process completes, but the following message appears: “Import failed. The specified file is invalid or unsupported.”
View 6 Replies View RelatedI am importing solidworks assembly files into AutoCAD 2014. They show up fine after importing them. It says the assembly is in inches but when i go into the individual parts blocks they are all 25.4 scale. Is there a way to not have all the parts scaled up when it is imported?
View 4 Replies View RelatedI am facing problems with my autocad when i import Revit drawing to it. The file start working extremely slow, and crashes often.
View 1 Replies View RelatedIs it possible to Convert a Solid Work's file to Inventor?
(I can get the file to open, but when I go to edit there is no model to see, yet there is the model in the drop down menu and get this error message.)
Autodesk Inventor Translation Report18 July 2012 (10:15)Source File:C:UsersaxcliffDesktopP01-7064.SLDPRTTranslator Type:SolidWorksSending System:SolidWorksunknownAuthor: Translation Time:00:00:01OptionsImport Type:N/AEntity Types to Import:Solids, Surfaces, WiresImport into Repair Environment:YesImport Assembly as Single Part:NoCreate Surfaces As:Single Composite FeatureImport Multiple Solid Parts as Assembly:NoUnits: Check Parts during Load:NoAuto Stitch and Promote:NoEnable Advanced Healing:N/A
Components
The following table lists the parts and assemblies created in Inventor:
+/-Name Inventor File Status
[+]
I have created Template drawing files of D Size, C Size, B Size with defined title blocks and dwg sheet information on it. These template files i want to used in 2011 Solid Works . I don't want to again create the Title Blocks , Border layout and Sheet information for Solid Works. How can i import or make use of ready templates created in Inventor to Solid Works. ?
View 1 Replies View RelatedI have some DWG files which contain walls of old castle some of the vertex are missing so I have to join them manually or found software to generate them automatically Does solid works have this functionality ?
After joining vertex how can I convert walls to meshes?
We are going from Solid Works to Inventor as our main CAD program and will be converting files to .ipt and .i am. We are moving our file structure into the vault as it is, with some commonly-used components in their own folders. When I convert an assembly, it only grabs the parts that are in the same folder as the assembly. Is there a way to have it look in other folders for components or to have it ask me to locate ones that are not in the assembly folder?
View 1 Replies View RelatedI want to create one Spur Gear in inventor with equations such that i can build more gears from this base model using excel table. For. Eg. I would like to create a gear with 40 No. of teeth of 10DP, and 20°PA, with Pitch Circle Dia, Base CIrcle Dia, Tooth Thickness based on spur gear calculations.
Now i would like to create a series of such spur gears with varying no. of teeth, i.e. 42, 44, 46, 48, 50..etc. Now if i change the No of teeth ,Accordingly the gear should modify its pitch dia, Base circle dia, Tooth Thickness which would be noted in the Equation.
how to create thes equations and use these in creating gear with different no. of teeth.
I have shown below list of gear data for various no. of gear.
When I open a drawing in Autocad 2014, the drawing name opens as drawing1 or drawing2, etc. The files have been saved with a drawing name, however when I open them after saving they open as a unsaved file.
View 1 Replies View RelatedI'm making drawings of assemblies in Inventor 2012 and was wondering how to turn off the visibility of specific solid bodies within a single part containing multiple bodies, or make it match the visibility in the assembly and part file itself.
In particular my situation is that I have a camera whose part model includes a solid body for its view cone. The visibility of this solid is turned off, so when opening the camera itself, or the assembly containing it, it doesn't appear, but when I place that assembly or part in a drawing it's included, and the only way I've figured out to get rid of it is to turn the whole camera's visibility off within the drawing.
Does Inventor Pro 2013 works with Vault Pro 2012.
View 1 Replies View RelatedWe have used Inventor 2010 with PSP 2011.
- Recently we have upgrade to Inventor 2012.
- Installed pspro_cad_fp_10.0.39.3 update for PSP Server and for PSP Clients.
And now, some drawings we can not open in Inventor 2012. Inventor crashes!
But some drawings we are lucky to be able to open and work with.
Drawings have the same template.
If the drawing is locked (read only) then inventor 2012 can open it without a crash.
If I drag&drop drawing out from PSP onto my Desktop, Inventor 2012 can open drawing without problems.
So we are not able to work with some drawings in Inventor 2012 and PSP 2011.
As the first and quick (and 100%) solution - rollback to Inventor 2010 can cost us about 5 man-days of work. (Because we have done some work in Inventor 2012 allready and will not be able to work with this in Inventor 2010)
I know what is block and I am aware of its importance and how it makes life much easier and pleasant in CAD wold. But I don't know for what reason, I was unable to make it a drawing habit for myself to use it as a routine. I am unfamiliar with this command and seldom use it.
View 9 Replies View Relatedhow to edit a solid with opening a hole only one face and deleting an another face..
I added a drawing file which has a coloured face solid,I put a circle on blue face and making a hole on this face,and I want to delete red face without exploding solid,after all this I want to mesh this solid with maximum 25 units.
I open a blank 2012 session with drawing1.dwg, then I open a new dwg "drawing2.dwg.So one session, two blank drawings.
I netload an assy into drawing2, and can run a lispfunction from it.
I netload the the assy into drawing 1, and cannot run the lispfunction.
it says "error: no function definition:..."How should the checking process normally be done, to see if a .net dll is loaded?I normally do this with lisp:
(if (not mylispfunctionname)
(progn
(COMMAND "NETLOAD" DLLNAME)
(vl-arx-import 'AcXt-GetColorNoBylayer) ;since I compile to separate namespace vlx's
)
)
The separate namespace thing is secondary, and I am just talking about loading dll's by hand, and running functions from them on command line. Once I get that ironed out, I can tackle how to detect from inside a vlx.I saw Kean's post on making a dll to detect what dll's are loaded, but its not even working for me once I have that info. URL....
I'm laying out a drawing. I use a visual style with facet edges and occluded edges dashed and intersection edges dashed. To give my lines hidden fo fabricators to know witch way to face angle iron and so on. But here is the big problem i do a veiw port with 4 shots 1 isometric solid 1 top hidden lines front hidden lines and right hidden lines. so first time i plot it, it will work fine then i go back to plot then the lines ither become not shown at all or they will be solid. even know the veiwport still shows them as hidden lines. If I delete the veiwport and make a new veiport all over again it will work for a single print then will not show it all over again.
View 9 Replies View RelatedI have an assembly that was created on 64 bit version of Inventor 2013, the total file size of everything is around 150MB. Even if I use 'Pack and Go' to move the file to another computer running the 32 bit version I get an error when I try to open it which says something like:
'unable to allocate 3GB memory for FBAttributeSegment'
The actually figure is over 3GB but of course on a 32 bit version of windows it is physically impossible to allocate that amount of memory (even with the /3GB in boot.ini hack)
I've performed various dynamic simulations as well as animations within the assembly so I'm thinking that perhaps its trying to allocate that huge amount of memory for a saved state of one of those.
What FBAtributeSegment might be and whether there is any special way to save an assembly to avoid this problem? The name FBAttributeSegment doesn't correspond to any part or assembly names.
I should also add that I have no problem opening it in a 32 bit version of Fusion which again suggests to me that it is something like simulation or animation that is causing this
In attempting to use either 'export face as' or 'export sketch as' from a solid model in Inventor 2013 the resultant DXF file ALWAYS consists of PolyLines. This prevents other "downstream" software from properly importing the file as a DXF. Thus far the ONLY work-around I have found is to open the DXF in AutoCAD, Explode the polylines, and then re-save as a DXF from AutoCAD.
View 8 Replies View RelatedI have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies View RelatedHow to start menu Edit Base Solid in Inventor 2013?
When i choose Edit Solid in Inventor . start Inventor Fusion
Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies View Relatedi am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?
View 7 Replies View RelatedI'm doing a fairly big one-off for use at our factory so am going the multibody ipt route. I have a design view setup within the ipt with nearly all solids switched off but when working within a sketch this seems to be ignored. I want to make sure I am projecting from sketches not bodies so if I need to tweak things later and bodies change the model won't fail.
I.e. the bodies all become visible when working in a sketch where as before going into the sketch the bodies weren't showing.
IV2014 SP1 64bit
Dell Precision T7500, Geforce GTX 480, DirectX11 306.97
SpaceExplorer 4.04, 3DxWare 3.12.2
Twin Intel Xeon E5506 2.13GHz, 12GB RAM, Win7 Pro SP1 64bit
Since version 2013 we got problems with how colours appear in the drawings.
They turn very dark. See the attached files.
It's important to us that white really shows as white.
I am having problems opening an idw created in the 2013 version on my inventor professional 2014.
The idw contains its own template, views, dimensions, details and cuts.
Upon opening in 2014 to release details of the scale is changed randomly and the views are out of the leaf.
When I try to open help in Inventor 2013, I get the error shown below about internet access.So I downloaded the offline files and saved them to C:program filesautodeskinventor 2013 and double clicked on the tutorial_files.ipj file to open Inventor as instructed in the installation notes, but still get the error. I opened the HelpIds.xml file in the Inventor Bin folder and set Use Online="0" and also copied another set of files into c: programs autodesk inventor2013local help and double clicked the tutorial_files.ipj file located there.
View 2 Replies View RelatedOne of our customer has inventor 2013 and I am working with inventor 2014.
I would like to know if there is anyway for my customer once my job is done to be able to load the Sub assembly with his software and be able to work with it ?
They told me Inventor fusion is not an easy tool and would prefered to use inventor files.
I have Adobe Creative Suite 3 Design Premium on a Power Mac G5 (4 x 2.5 GHz), 4.5GB memory. Running Version 10.4.11 OS X. It had been working for a long time, I'm not sure when it stopped opening as I do not use the program every day, but now I'm in need of it on a regular basis and the program doesn't open.
I get the following error message "The application Photoshop quit unexpectedly." I've reported it to Apple but have not received a response as of yet
Here I attached a sample drawing.
There is a wipeout on top of 2 blocks.
DRAWORDERCTL is set to 3.
But when I explode these 2 blocks, one block inherits the parent block draworder and stays below the wipeout while the other doesn't.
I am attaching a scroll work for doors that I am trying to draw. But I am having problem on the smoothness of the curves that I am trying to make. What I do is I draw a series of arcs to replicate the reference image also attached in this message. Also, when I print this into PDF, what happens is that the lines break where the arcs intersect in CAD, also attached here.
View 9 Replies View Related