AutoCAD Inventor :: Converting Solid Works Assemblies With Parts In Different Folders
Sep 19, 2012
We are going from Solid Works to Inventor as our main CAD program and will be converting files to .ipt and .i am. We are moving our file structure into the vault as it is, with some commonly-used components in their own folders. When I convert an assembly, it only grabs the parts that are in the same folder as the assembly. Is there a way to have it look in other folders for components or to have it ask me to locate ones that are not in the assembly folder?
View 1 Replies
ADVERTISEMENT
Nov 19, 2013
I have some DWG files which contain walls of old castle some of the vertex are missing so I have to join them manually or found software to generate them automatically Does solid works have this functionality ?
After joining vertex how can I convert walls to meshes?
View 1 Replies
View Related
May 28, 2012
redirecting T&P and Frame Gen parts and assemblies to custom folders, changing folder structure from default to custom.I find default folder structure too complicated and want to simplify it.Also, when copying design, I get a message about folder paths being to long and I am unable to execute Copy Design.
View 5 Replies
View Related
Oct 3, 2011
I am working in an Inventor Assembly .iam, I have about 250 fasteners (screws) that are constrained to a flat washer and lock washer. I would like to put them in as a single unit (sub assembly if you will) and then promote or explode them in the top level so that my bom has 250 screws, 250 washers, and 250 lock washers all at the same level, not associated to one another except thru the constraints that were entered in the original assembly. I have tried Promote but that doesn't work because it removes the washers from the original file and I end up with only 1 instance of the assembly. Am I approaching this incorrectly? Is there a better way? I run across this scenario with different components quite often.
View 2 Replies
View Related
Jul 10, 2012
I have an assembly with a lot of purchased parts. I need to create a buy out list for purchasing. I've done this many times in the past and have a template set up for this purpose.
So now the problem, In this assembly, I have subassemblies showing up on my parts only parts list.
One of the subassemblies cinsists of two purchased parts. Both parts are set to purchased in the Bill of materials. If I do a parts only list on this assembly, it works as expected, showing two purchased parts. However, if I put that assembly into a higher level assembly, A parts only parts list shows the assembly instead of the individual parts.
View 2 Replies
View Related
Jul 18, 2012
Is it possible to Convert a Solid Work's file to Inventor?
(I can get the file to open, but when I go to edit there is no model to see, yet there is the model in the drop down menu and get this error message.)
Autodesk Inventor Translation Report18 July 2012 (10:15)Source File:C:UsersaxcliffDesktopP01-7064.SLDPRTTranslator Type:SolidWorksSending System:SolidWorksunknownAuthor: Translation Time:00:00:01OptionsImport Type:N/AEntity Types to Import:Solids, Surfaces, WiresImport into Repair Environment:YesImport Assembly as Single Part:NoCreate Surfaces As:Single Composite FeatureImport Multiple Solid Parts as Assembly:NoUnits: Check Parts during Load:NoAuto Stitch and Promote:NoEnable Advanced Healing:N/A
Components
The following table lists the parts and assemblies created in Inventor:
+/-Name Inventor File Status
[+]
View 1 Replies
View Related
Apr 5, 2013
I have a customer who uses Solid Works and I of course have Inventor 2013. Before I get into discussion with them about software compatability I wanted to ask the experts! Can I open Solid Works drawings with Inventor?
View 6 Replies
View Related
Feb 14, 2012
I have created Template drawing files of D Size, C Size, B Size with defined title blocks and dwg sheet information on it. These template files i want to used in 2011 Solid Works . I don't want to again create the Title Blocks , Border layout and Sheet information for Solid Works. How can i import or make use of ready templates created in Inventor to Solid Works. ?
View 1 Replies
View Related
Dec 5, 2012
I have an assembly file for a fan casing. We reuse this model and scale it up and doen depending on the size of fan.
For transportation we split the caing into several parts and join using flanges. The number and angle of splits changes depending on the job and geometry.
To model this we share a sketch through the parts and use the split solid command to split them.
I would like to able to create sub assemblies from the main assembly so that drawings and masses can be obtained for the sub assemblies. However, the 'Demote' command does not allow you pick individual solids from a multi solid part.
I have tried creating new parts from the split solids but these are not in the correct location as they are not constrained correctly.
Is there a way to use the Demote command as I am proposing? or is there a different method to split my parts?
View 3 Replies
View Related
Nov 4, 2011
I've created an assembly by using "Make Components" from a part comprised of solid bodies. If I suppress a feature in the "Control Part.ipt" (the part that holds all the solid bodies) it removed the part from the assembly, but it does not remove it from the BOM. What do I have to do to make the BOM follow what the assembly looks like?
View 2 Replies
View Related
Oct 16, 2012
I'm having a problem highlighting parts within a sub assembly. A simple structure to demonstarte this issue would be:
TopLevel.iam
|
SubAssy.iam
|
ChildPart1.ipt
ChildPart2.ipt
Using this structure I wish to highligh ChildPart1.ipt, howver my vba macro code below doesn't seem to work (nothing happens):
Public Sub Highlight()
Dim SubAssy As Inventor.AssemblyDocument
Dim ChildPart1 As Inventor.ComponentOccurrence
[Code].....
View 2 Replies
View Related
Apr 3, 2009
how the file structure works and how to link parts (ipt) and assemblies (iam) to each other. I converted a large file from Mechanical desktop to inventor which was a two day process. All parts and assemblies for the main assembly were dumped into one directory. I would like to move all the part files to one location and the assembly files (sub assemblies) to another location and then tell inventor to go there and pick the items from those two locations. I have set up the project telling inventor where to go and look. I moved all the items out of the original directory and now when I open the main model assembly I have to resolve the link to each part individually. This will take forever, is there a way to have inventor go and look for the parts and assemblies without me having to resolve each one?
View 3 Replies
View Related
Oct 21, 2013
I just installed Inventor 2014 today and I can't drag a part from the browser of one assembly into another open assembly.
It changes the cursor when I do it, but it never actually drops the model into the new assembly.
View 3 Replies
View Related
May 31, 2012
I have one main assembly with two seperate sub assemblies in it. I need to make two drawings showing the installation of both sub assemblies (one drawing for each). I need to insert views of the main assembly into each drawing, showing the overall view of the install, but I need the balloons to represent the sub assembly BOM.
I tried making the sub assembly I'm not currently showing, Phantom, and I have a design view set up to hide the information of the sub that is not part of the current drawing. That seems to work fine for the first drawing, but when I change the BOM (of the main assembly) to suit the next drawing, it affects the first drawing. How can I use one main BOM to suit two different drawings, showing only certain components? Or can I "tell" the balloons which BOM to reference? (I have the BOM of the sub assemblies set up the way I want them as well)
View 3 Replies
View Related
Jan 11, 2012
i placed an ilogic component (wich i use as a template to later change dimentions) into an assembly file after changing dimentions i placed the same "template" ilogic component into the assembly but when i want to change something on the second component it also changes the first one and that only happens with only one feature of the component the other features work fine.
View 2 Replies
View Related
Mar 19, 2013
I'm working on a project with three small and very similar vessels. I'm done with the first vessel and I want to re-use this assembly when I start to design the next one. But vessel number two will require some changes to the parts (nozzle location and so on)
My question is, how do I re-use my assemblies and parts so that I can make changes to them without it affecting my original parts and assemblies?
View 9 Replies
View Related
Feb 23, 2012
How do I scale parts and assemblies in Inventor. I"d like to be able to change the size of parts, sub-assemblies and full assemblies up and down by a uniform amount. Ideally, I'd be able to increase or decrease the size of a part or assembly in all three axis or only in one at a time.
View 9 Replies
View Related
Mar 9, 2012
I am puttilng parts together on an assembly and right now when I move them they stop when they hit. how do I turn this off?
View 1 Replies
View Related
Aug 23, 2012
Is it possible to rescale whole assemblies after they are created?
Say I have three serially linked worm drives that fit inside a cube 50 cm on a side, can I take the file and reset the dimensions to where it could fit inside a 1 cm cube?
Does it matter how complex the assemblies are? Could an entire car be rescaled to fit inside, say, a 1 mm cube? Never mind that a normal internal combustion engine that small might not work at all because of the air viscosity at that scale--it's not real.
View 1 Replies
View Related
Oct 30, 2008
I have some BOM parts and an assembly that are read only and I need to be able to enter information in the bill of materials under the status column and the comments column. The BOM parts are i-parts and the assembly is an i-assembly. Is there a way to set them to read or is this a limitation?
View 9 Replies
View Related
Jul 11, 2012
I have a issue merging multiple parts into one assembly. When i do the constrains the parts are able to move but the pieces break part. I need to be able to move the whole assembly with all parts together without them breaking apart.
View 6 Replies
View Related
Jul 11, 2012
I can't move the assembly I'm building around without the parts moving out of place from where there constrained too. I manly use mate and flush constrains. I have to build a layout of a room later on with these assemblies in it and they must be able to be positioned where they need to be. How do you keep your constrain parts from moving out of place?
View 1 Replies
View Related
Nov 13, 2012
We have thousands of parts & assemblies, and want to create a thumbnail image of each for use with our production software. Unfortunately task scheduler only exports to solid models, not images. How to achieve this via macros, VB or iLogic. The process would go something like:
1) open (each) file
2) turn 'all work features off' (not essential but it would be nice so work planes don't show up in the thumbnail)
3) go to 'home view'
4) zoom to extents or zoom all
5) 'save copy as' to a set location (not same location as part or assy) with file name of "<PartNumber>.png" (not same as original filename)
6) turn 'all work features on' (if we managed to turn them off)
7) close (and repeat process for the remaining parts & assy's).
View 1 Replies
View Related
Jun 15, 2012
I initially entered a few overrides for mass on some parts that I have included in a large assembly. However I now want the calculated values of mass to be used and not the overridden values. I go to the part file, erase my value, and click update and it now shows the calculated mass for that part. However in the assembly it still shows the initial overridden value even though I have tried updating it. How do I use the calculated mass values in my assembly?
View 1 Replies
View Related
Nov 14, 2011
Is it possible to replace sub assemblies using ilogic - I can only see a link to replace parts?
View 1 Replies
View Related
Jul 25, 2013
Any way to create a parametric Parts List containing subassemblies, where the subs are listed, by name/item number, in colum format, and qty's are tabulated accross rows. (see attached as an example). If the same part number occurs in multiple subs, the part is only listed once, but the quantity for each sub would be noted. The pdf attached had to be done manually, which somewhat defeats the purpose of having software like Inventor.
View 2 Replies
View Related
Apr 20, 2012
How to export assemblies and/or parts from inventor to SolidEdge St4 and have the part remain editable in solidedge ST.
We are trying to send a .ipt to a designer that uses SolidEdge ST4. She can open the file and has no issues translating however it remains a dumb solid.
Is it possible to have it be parametric and keep the features?
Inventor has a feature recognition tool that I have use with much success I hope ST4 has something similiar.
View 3 Replies
View Related
Oct 23, 2012
Need naming my parts and assemblies so i wont have trouble later finding I have numbers or names that get repeated. Need naming or diving my parts and assemblies.?
View 1 Replies
View Related
Oct 14, 2011
where to find a tutorial that explains the usage of Design Assistant? Particularly the practice of renaming assemblies and linked parts?
View 4 Replies
View Related
May 30, 2012
When copying an iam + ipn, and making some changes, the browser suddently shows far too many parts or assemblies ?
Is there a way to "update" the browser?
View 2 Replies
View Related
Nov 30, 2012
how could I use these functions "AssemblyAllVisibleDesignViewCmd" and "AssemblyAllInvisibleDesignViewCmd " to show and hide all parts?
View 2 Replies
View Related
