Here I attached a sample drawing.
There is a wipeout on top of 2 blocks.
DRAWORDERCTL is set to 3.
But when I explode these 2 blocks, one block inherits the parent block draworder and stays below the wipeout while the other doesn't.
I know what is block and I am aware of its importance and how it makes life much easier and pleasant in CAD wold. But I don't know for what reason, I was unable to make it a drawing habit for myself to use it as a routine. I am unfamiliar with this command and seldom use it.
View 9 Replies View RelatedI have been looking for dynamic blocks (simulation-types) for a number of months in vain. Where I can find any information regarding dynamic blocks combined with geometrical and dimensional constraints such as the ability to draw dynamic roller shutters, revolving circle (rotate and move together) and sliding doors and windows.
Are there cad applications devoted to 2d-simulation for example a shop-drawing application.
I have this view label block I have been using for some time know and it worked fine up until today. I asked a user to add a visibility state to show a triangle around the ViewNumber. In doing so the user wanted to cleanup the viibilty state names. In the block editor all the states and names look good, but in the drawing it shows the old vis state names and the added state for the triangle is not available.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
Does Inventor Pro 2013 works with Vault Pro 2012.
View 1 Replies View RelatedI've been trying to import a Solidworks file (.SLDASM) into AutoCAD 2013. The documentation says this is a valid file type, but it doesn't seem to work The import process completes, but the following message appears: “Import failed. The specified file is invalid or unsupported.”
View 6 Replies View RelatedI am attaching a scroll work for doors that I am trying to draw. But I am having problem on the smoothness of the curves that I am trying to make. What I do is I draw a series of arcs to replicate the reference image also attached in this message. Also, when I print this into PDF, what happens is that the lines break where the arcs intersect in CAD, also attached here.
View 9 Replies View RelatedI have a customer who uses Solid Works and I of course have Inventor 2013. Before I get into discussion with them about software compatability I wanted to ask the experts! Can I open Solid Works drawings with Inventor?
View 6 Replies View Relatedmy match properties command no longer works and i dont know why. No error msgs come up either
View 3 Replies View RelatedI installed the Network License Manager in a Windows 2008 Server ( I installed theNLM using the CD of AutoCAD 2013). The AutoCAD 2013 works fine in the clientmachines, but the 2011 and 2012 version don´t. In the page of Autodesk, on ManageSerial Numbers, I can see the Serial Number for 2011, 2012 and 2013 Suites. Why theAutoCAD 2011/2012 don´t work in the client machines? Note: in the 2011/2012 versionappears the message " A valid license could not be obtained by the network licensemanager. If you are still unable to access a license, contact your systemadministrator. Error [-96.7.11001] ".
View 1 Replies View RelatedI am importing solidworks assembly files into AutoCAD 2014. They show up fine after importing them. It says the assembly is in inches but when i go into the individual parts blocks they are all 25.4 scale. Is there a way to not have all the parts scaled up when it is imported?
View 4 Replies View RelatedWhy RTEXT does not work in AutoCAD r2013?
The below RTEXT string is insert into the drawing and it now longer works in release 2013.
$(GETVAR, "DWGPREFIX")$(GETVAR, "DWGNAME")$(EDTIME, 0, MON DD"," YYYY - H:MMam/pm)
I received a file that has a large number of blocks with unnamed blocks inside. I need them all to be by layer, and i really don't want to explode it.
How can I can do it?
I am facing problems with my autocad when i import Revit drawing to it. The file start working extremely slow, and crashes often.
View 1 Replies View RelatedI have created a dynamic block which has hatchings in it.
In the block editor when I do a test of the block everyhting runs smoothly.
Howevfer when it is in model space it fails to keep the hatch boundary associativity. Even when the same dimensions are used as the block has as default.
Why would this be?
I am doing a placement at company and they asked me to edit a drawing but i don't know how to convert or import the file.
View 2 Replies View Relatedtoday i decide to work in production with maya 2013 it's the begin of project 1 make one light mib amb occlusion to fzke fg one portail light for soft shadow one plane on the plane i try to apply bend deformer , don't work , all deformers don't work so come back to 2012 and now i'm very tired to see that , with the more basic tool , bug arrived so i was desapointer with this poor release but i think ok , they work to clean all the bugs.
View 5 Replies View RelatedWe recently updated all of our software at my company from 2010 architectural desktop to 2013 autocad. We do a lot of architectural work where we use the "wall" functions to draw our floorplans. I have noticed that the walls are disappearing on some files and not on others. Or we will only be able to see the outside line of the wall, but not the interior, which results in an undesirable appearance to the floorplans.
I have also run across these error messages when opening the files, I dont know if they are related or not:
"Unhandled exception C0000005 (access violation reading 0xffffffff) at address E43AA180h"
and
"Unhandled exception C0000005 (access violation reading 0xffffffff) at address D41218AEh"
I use autocad architecture 2013 and it works just fine until the save turns to qsave whenever i want to save a drawing by save, save as and ctrl+s it works as qsave..how can I turn it back to SAVE ?
View 9 Replies View RelatedI got this big file of a map, and, when I paste the different pieces of the map, some of them are invisible. I already erased all the scale stil but it doesn't work. The files are there but i can't see them, i think there's something wrong with the blocks.
View 8 Replies View Relatedsome attributes you can double click and edit within the dialogue box, others you have to double click and they are greyed out in the box, you have to click the little button with ... on and edit in place on screen... why?
whats the difference between the block atributes? attached is an example...
I am inserting some mechanical changes into my master drawing (updating my as built drawing). I copy with base point the hvac changes, I paste into the master drawing and all is cool; the block looks fine. When I explode the block, the text and some hvac blocks (like elbows with attribute) are way out off scale, like way bigger than they should be.I don't get it.
View 9 Replies View RelatedWe are currently moving from 2009 to 2013 and have a variety of drop down menus and palettes. I want to promote the use of the ribbon menus and new set up.
What is the best way to set up the block libraries? Could I just use the Design Center references block drawings?
Is it easy to convert existing palettes / menus to the new format?
I am confused how the blocks work in AutoCAD 2013. I previously had 2004 and had an add on called ARCH T. This add on had an entire library of blocks. Although, the new version of Arch T that I would need to buy is $1000... so I'm trying to avoid that. I know you can insert blocks from within AutoCAD. But the process confuses me. In the design center, it seems like I just need to go to a drawing file and it pulls up blocks that are already within that file. But its not necessarily all of them. Is there a way to get all the blocks in one file to pull from? How does this work??
View 6 Replies View RelatedWhen I type in the command "SC" for scaling the object, it'll asks me to specify base point then I can enter what scale I want it to be, such as 2 times or 0.5 for half sacle.
with the new 2013 version, sometimes it'll exit the command if I select the insertion point of the block or if the object is at the 0,0,0 location of the drawing. it'll also give a message of "the scaling factor is too small". But I haven't enter what scale I want to scale the object yet.
When exporting from AutoCad to pdf, from paper space, my blocks come out looking strange. I was having the same problem with text but fixed that by converting to Arial. I am exporting to an Arch E size. I have found that when I am zoomed out to show my entire campus, this is when I my problem occurs. When I am zoomed in to show a specific area, export is fine.
Using AutoCad 2014. Files saved back to version 2010.
I have opened an exported .dwg file from Vectorworks. I have been able to hide most items I wish to. My difficulty is that I have (what I think from reading and Youtube) is dynamic blocks (light instruments). They are on a layer that is turned off, yet they are still visible. I've played around in the block editor, but I really don't know what I'm doing. If need be I can delete the light instruments, but I'd rather not. If there is a command to hide all blocks? I tried to use the properties editor to change the color to white so they would disappear. That didn't work.
View 2 Replies View RelatedI am trying to copy and paste a bar scale from one drawing into another at 0,0…. But it won’t show-up, as you can see from the attached there are 17 blocks in this drawing but none of them will show-up, I have even tried to re-insert the block but still no joy….. I have re-started AutoCAD, even the computer but still nothing…….
View 3 Replies View Relatedwhen I insert a block from the tool pallet I want to be able to rotate it 90 degrees with the spacebar (just like revit when inserting a component).
How to rotate a block 90 degrees with the spacebar?
In my files there are over 2000 blocks with the name like 1234$0$Block1, 1345$0$Block1,....
Could we remove prefixes before Block1, i try with rename and blockreplace but have to do one by one.
I was working in a drawing when I had a Fatal Error. When I brought Acad back up I have lost my editing capabilities for my 3D walls and blocks.
View 1 Replies View Related
