AutoCad 2D :: Opening Existing Drawings In Wrong Units
Jul 10, 2012
I have a problem with my autocad. The administrator started me out on AutoCAD 2012 global.
The problem existed then so. Now he has me on AutoCAD 2012 Imperial . The problem still exists.
When I open an existing drawing that I have never opened with my version of Autocad. It opens the drawing in Metric units. I do not want Metric units. I would like it in Imperial units. Every time I open an existing drawing, I have to change the units to Architectural.
View 4 Replies
ADVERTISEMENT
Apr 2, 2013
Every now and then I go back and try to use publish to speed up printing but I always go back to plotting one by one.
I work in a housing construction office and I have 10 separate drawings side by side in model space for house plans that I need plot separate to give to certain people. My problem isn't that I can't publish them separately its that I can't save them over existing pdf's individually predetermined.
Q1. do i just have to go through and change every layout name before or after i publish?
Q2. how do i change the output publish location?
Q3. can each layout be saved to a different existing pdf and remember it?
Q3. can i save these setting across to a new drawing?
View 5 Replies
View Related
Jun 20, 2011
I created an alignment from an existing line and am having an issue with the stationing. The length of the original line is about 14,666 ft but when I convert it to an alignment it is 1,222 (1/12 of original).
View 8 Replies
View Related
Sep 2, 2013
I am using Autocad Architecture 2013 and I am having an issue with Property Set Data. Whenever I create door or window tags, the Property Set Data is in the wrong units.
I have two separate projects, on in Imperial units and another in Metric. When I add a new door/window tag, the units for that particular door or window are incorrect. The drawings are setup in the proper units, the dimensions are as well. But when I create these tags and subsequently the schedules for them, they are in the wrong units. The tags/schedules for the metric project are in feet and inches and the tags/schedules for the imperial project are in millimeters.
View 2 Replies
View Related
Nov 3, 2011
I need to show feet and meters in my drawing. I got them to show up, however the decimal is in the wrong spot. Instead of it being 1.8288 meters for 6 ft., it's showing as 1828.8. Everything I read says to 'just move the decimal'. But how do I do that without overriding the actual dimension?
View 4 Replies
View Related
Apr 4, 2012
I have a venue drawing that is in mm and I need to convert it to ft/inch so I can update and get dimensions from it. Can this be done so when I change the format in drawing units it will update the drawing units?
Current settings.
Drawing units
Length:
Type - Decimal
Percisin - 0
Angle:
Type - Decimal Degrees
Precision - 0
Insertion Scale:
Unitless
View 4 Replies
View Related
Sep 17, 2013
I have a drawing from a contractor that is dimensioned in metric units. I have been tasked with converting the displayed units to inches for our machine shop. I have tried to display alternate units but they don't appear, yes, I did check the "display alternate units" box. I am using AutoCAD 2013.
View 9 Replies
View Related
Feb 22, 2012
I sometimes am given drawings which are done in a software package called LSS of which I do not know much, these drawings are usually to show a model of a band, by using contours of a site on which I am working and are saved by LSS in a dxf format so I can then import them into my autocad drawing.
The problem I have is that I also have drawings of the same site from a surveyor which has the buildings new and existing, but they are in different units.
The surveyors drawing for instance the grid measures 100000mm whereas the LSS model drawings the grid is 100m.
This means the coordinates are different so it is difficult to match them up , the only way is I have found is to rescale the LSS drawing up by 1000, then find a common intersection i.e. corner of boundary line. This is not always very accurate.
The guys who do the LSS drawings tell me they cannot change the units to mm.
View 2 Replies
View Related
Aug 3, 2011
I recently started working at an Electrical Engineering firm and one of my many tasks is to sort out their AutoCad system and bring it up to date! An issue that has only recently started happening is that our blocks don't insert at the correct scale. Some of our drawings are metric and some are imperial, and currently all our blocks are in one Imperial file (reference file for our palettes). Is this our issue, my understanding is that when you create a block you should create it as a wblock and each block should have its own file.
The problem is that some of our blocks we want to come in at scale ex/ a 2'x4' light fixture, however an electrical socket or light switch symbol we want to come in at a slightly enlarged scale so that you can easily read the drawing and see where they are located.
View 7 Replies
View Related
Aug 3, 2012
Since version 2013 we got problems with how colours appear in the drawings.
They turn very dark. See the attached files.
It's important to us that white really shows as white.
View 4 Replies
View Related
Jun 25, 2012
Attaching images to the drawing.
I start up LT2009 and it goes to 'My Documents' I change to the relevant directory and then attach an image.
Immediately after that I press return to do the command again and it opens up a totally different directory.
View 2 Replies
View Related
Jan 31, 2012
running AutoCAD Civil 3D 2012. From the beginning of my course I’ve had CAD opening to my template; from the options, under the file tab, then template settings, I set all four of the subcategories to my template and the appropriate folders. My template is set with an engineering drawing scale. A couple weeks ago, I fired up CAD and it opened to a different template where it’s using an architectural scale. I checked my template settings in the options and they are the same. I closed CAD, reopened it, and have gotten the same result since then. When I open my drawings that I’ve been working on the scale goes back to engineering or if I manually open my template, it is an engineering scale as well. Is there another area that controls how CAD opens besides the options for templates settings? I really don’t understand how that could have been changed in the first place since we have always used our templates from the first week of class.
View 3 Replies
View Related
Dec 10, 2013
I received dual monitors a while ago and I've noticed an annoying issue with VBA dialogs. No matter which screen I have inventor open on all but one of my dialog boxes opens to the far left side of my right monitor. This is quite annoying as I normally have to drag the dialog bad to a better spot.
All of my dialogs have the "Center Owner" for the start up position selected. I can't explain why one scripts dialog box appeared centered and the rest don't.
View 1 Replies
View Related
Jul 23, 2013
I've recently (this morning) come into the issue of the old plot printers being saved in CAD files. I've found a number of tutorials online about adding new pages, and setting the default plotter to "none" via DWGTruView, but these are just shy of what I'm looking for.
Is there any way to tell AutoCad 2013 that if the current/default plotter is "None" to set it to a certain printer? I have about a thousand CAD files that need this change made on them, so obviously a more automated approach would be greatly appriciated. Currently the entire set of them has has their Plotters set to "None", and a custom Page Setup configured.
View 5 Replies
View Related
Jun 11, 2012
For new drawings, is there a way to program Autocad to always load Xrefs relative? We pretty much use xrefs everywhere, and it seems like it would save a lot of time if I didn't have to open the External References and change each xref to relative.
Also, if you have an existing drawing and need to change the xref from absolute to relative path, is there a way to have it automatically do that? I'm assuming there isn't, but thought I'd ask.
View 5 Replies
View Related
Apr 24, 2012
I'm attempting to create a sheet set from existing drawings, but when I point the "New Sheet Set Wizard" to the folder containing my 8 or so drawings (with 24 or so associated layouts), only 2 drawings appear with 6 associated layouts for import. The other layouts don't even show up as being part of another sheet set. How do I get the New Sheet Set Wizard to "see" the layouts?
View 4 Replies
View Related
Jan 23, 2013
I have a problem with Dimension association to any existing object in my drawings. If i draw anything new in the same drawing this problem does not occur. The leaders are also associating themselevs to these objects.
When i select a line, no grips appear even though if i draw a new line they do.
-I have tried to use DIMDISASSOCIATE the dimensions from the objsect to no avail.
-I have tried changing the DIMASSOC variable but this didnt work.
-I have tried exporting the objects to new files but still the same problem, only with the objects from this drawing.
It seems to have made every object associative. The only thing i can think that caused this was i pasted in a drawing from a pre 2002 Autocad version.
View 9 Replies
View Related
Jul 26, 2010
I've created a new sheet set with some existing drawing files. These files have several layout tabs in each drawing. The Sheet Set Manager (SSM) seems to import the layout tabs in random order, not in the order they appear on the drawing, nor in alphabetical or numerical order. In addition, the SSM imports and numbers all of my drawings in reverse order. Any system variable setting, or some other property setting somewhere that will change this back to ascending order?
View 7 Replies
View Related
Mar 26, 2012
When opening up an AutoCAD drawing (double clicking the target drawing, no other autocad files open) the drawing opens up and the AutoDesk Exchange Welcome screen also opens up that is unnecessary and I have to close it out. I can't figure out why this is occurring or how to disable this. No other windows or options occur that asks me to disable this.
I recently reinstalled AutoCAD and am happy with everything else, it seems that when it comes to AutoCAD.
View 2 Replies
View Related
Nov 11, 2013
most times i have to work on multiple drawings. i open these drawings all at once, but due to their size, it takes some time to open all the files. It would be nice if autocad would stay in the background while opening rather than forcing itself to be the focused programs after each file is opened. this really destroys the ability to multitask and honestly just seems arrogant at this point...
View 3 Replies
View Related
May 23, 2013
I modified a routine that processed xref names & paths w/in a set of folders. Thie original version would open each drawing & do its thing. THis would take about 20 minutes (aprroximately 90 files). I modified it to work w/o opening each drawing. This still takes about 20 minutes.
I would have though that not avtually opeing each drawing would dramitically decrease the overall time required to run this routine.
View 5 Replies
View Related
Sep 17, 2009
Whenever I open an image in Gimp, it's just a little off colour. Then when I save it as an image file (usually png), it's even more off colour than what's displayed in Gimp. For example, if the image starts out with a grey background of 808080 (RGB Hex Value, 16-bit), in Gimp it's 7F7F7F, and when I save as a png, it's 6E6E6E (honestly, how does that make sense under any circumstances?). I've tried every combination of settings under colour management, to no avail. Once, I managed to get Gimp to display the correct colour, but when I saved it as a gimp file, and re-opened it, it was wrong again.
View 13 Replies
View Related
Jun 26, 2013
When I open a drawing in Autocad 2014, the drawing name opens as drawing1 or drawing2, etc. The files have been saved with a drawing name, however when I open them after saving they open as a unsaved file.
View 1 Replies
View Related
Mar 8, 2013
I get the attached when opening certain drawings which fails to load my acaddoc.lsp and so several useful lisps don't get loaded.
a successful drawing opening shows the following
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 9 Replies
View Related
Feb 24, 2012
I have been given a new lap top plus the updated AutoCAD rev. 2012.Supposedly it is superior to my old laptop but... it runs slower, the mouse action is awful, it's like stirring cold porridge.
Anyway, I have spent the first week battling with various bits, trying to get it to look & feel like my previous laptop using 2010.
The big issue I have is upon start up. Rather than loading the standard AutoCAD "drawing 1" regardless, I want to have the browser open up so I can select the' previous drawings loaded on my last session or select a new drawing or browse folders to find the drawing I want.
how I managed to switch this on, back when I managed it on 2010 version.I have given up on running up & down the menus.
View 3 Replies
View Related
Jan 25, 2012
I receive this pop up message every time I open a drawing. How to stop this from happening??
Not sure what info you may need I'm running windows 7 with autocad 2010. I also have autocad 2005 loaded on the same machine and this box does not appear when opening drawings with it.
View 5 Replies
View Related
Oct 26, 2012
Im not talking about osnap, I am talkin about snap which limits your cursor. When I open exisitng drawings, some of them have snap turned on and it is bothering me. Is there a way to adjust your settings to always have snap turned off?
View 1 Replies
View Related
Jun 28, 2013
Rscently upgraded from xp to win 8, re installed autocad 2011.
Now when I try to open a drawing from within autocad my system crashes, I get a flash of horizontal lines then two blank screens.
Tried running narrator but just get static through the speakers, I have to hit the re start button to get back in.
I can open a drawing from explorer if autocad is not allready running, autocad starts and the drawing opens with no problems. but if I try to open another drawing we crash.
View 3 Replies
View Related
Sep 27, 2013
I just recently had to install 2009 from map 2008. When I open drawings last worked on and saved in 2008 and open them in civil 3d 2009, I get drawings that freeze up upon opening. Some will eventually open, showing errors. Others will never open and just freeze up.
View 2 Replies
View Related
May 23, 2012
how to remove following message which appears when i open new / file existing file. This also changes my settings and autocad does not work properly.
View 4 Replies
View Related
Dec 11, 2013
I'm having an issue with my cad files that were done with Civil 3D 2012. When we made the jump to Civil 3D 2014 all my drawings seem to be corrupt. Now I have pipe networks in my base file. I have tired recovering and recoverall but no luck. I can send the CAD file.
View 1 Replies
View Related
