AutoCAD Architecture :: Property Data Sets In Wrong Units
Sep 2, 2013
I am using Autocad Architecture 2013 and I am having an issue with Property Set Data. Whenever I create door or window tags, the Property Set Data is in the wrong units.
I have two separate projects, on in Imperial units and another in Metric. When I add a new door/window tag, the units for that particular door or window are incorrect. The drawings are setup in the proper units, the dimensions are as well. But when I create these tags and subsequently the schedules for them, they are in the wrong units. The tags/schedules for the metric project are in feet and inches and the tags/schedules for the imperial project are in millimeters.
View 2 Replies
ADVERTISEMENT
Oct 8, 2012
I am trying to find a way to programmatically move our AutoCAD room tag attribute data to new AEC space property sets. I work in a hospital that has approx. 1 million s.f. and over 3000 rooms. Obviously a daunting task to do room by room.
View 4 Replies
View Related
Mar 16, 2012
I've got a multi-family building where I'm trying to create a schedule tag that will number walls sequentially in a view drawing. The units are elements that are then brought into a construct and mirrored and rotated as needed.
The first thing I did was to create a Property Set that uses Level and Manual property set that automatically increments to create a property called Unit Number. Then created a tag that will number the units in my building i.e. : 201 202 etc. This works fine.
I then created a Property Set to apply to the walls that uses the Unit Number from the other Property Set along with a Manual Property Set that increments as well to create a wall tag. What I am expecting to get is 201-01, 201-02 etc. What I’m getting is ?-01, ?-02 etc.
View 7 Replies
View Related
Apr 2, 2012
I have created a space with space generater, added a room tag. When I click on the room tag and click properties I do not have Property Sets from Referenced Objects under extended data. How do I add this? I drawing I did about a year ago has this, but the curent project does not and I do not remember how I managed to get this info to appear.
View 4 Replies
View Related
Sep 4, 2012
I've got a problem following playing around (Typical, isn't it?). Architecture 2011 allows editing property sets from external objects through the host drawing (i.e. change a room number of a property set attached to a space xref'ed in from another construct). This obviously has to put an editing lock onto the xref to prevent data loss in case somebody else works on the xref in the meantime. This editing lock is removed when I close my host drawing. However, the lock is immediately restored when I re-open the host drawing.
How can I release the xref file lock again after editing the property sets in my host drawing?
View 1 Replies
View Related
Jul 25, 2013
Is there a way to display and control the visibility of property set data next to a tag or object in model space?
For example, imagine a floor plan such as a large hotel with a lot of doors. It would be nice to be able to look at the plan and see which doors have had their property sets filled out and which ones have not; and, it would be great if the visibility of the property set data could be toggled on and off so as not to clutter up the drawing when not needed.
View 7 Replies
View Related
Mar 22, 2011
We are creating property set data and attaching it to polylines in autocad 2011. export the drawing to the older format (2007) and maintain the property data connection. We don't have and old version anymore so I can't test.
View 1 Replies
View Related
Feb 1, 2012
after discovering zones and the space evaluation tool I wonder whether it is possible to customise the XLS output further by also reading out information from a property set attached to the space?
The office standard is to have a property set attached to each space that defines a room number (which is the level ID plus a number, say G-01), the area and the space name.
We used to simply schedule the areas with a schedule table. That only gives us net rooms, no subtotals per department (or say per flat) and no grandtotal.So we got as far as using zones grouping the spaces in each flat.
Now I need an area schedule XLT template that also displays the room number from the space's property set and the schedule grouped in a fashion that I get subtotals per flat (=my zones) in another column and a grandtotal.Playing with the Space evaluation tool I seem to only ever get Room/ zone names and their areas.
View 2 Replies
View Related
Feb 12, 2013
Is there a way to control which of two 'Graphic Property definitions' are used via a formula property with a IF, Then, condition statement?
View 3 Replies
View Related
Aug 25, 2011
I have two related properties... One is a formula property, the other is a manual property.
In the formular property I'd like to set the value of the manual property.
View 1 Replies
View Related
Oct 24, 2012
I am selecting items and grabbing their DBObjects, and then reflecting on those objects to inspect properties of the object. For example, I might have a DBObject that is actually of type Pipe, Duct, DuctFitting, Line, etc, so I am using TypeDescriptor reflection to handle various cases in as abstract a way as possible.
My first question is this: Is this the smartest way to grab all of the attributes of a give object? Is there another call I can make the retrieve all of the attributes for a Pipe and a Line (to very different types of objects).
Second, when I see a property named Length and it is a double I know it has to be a length and that I can use the units from the drawing. Is there a way to programatically discover this other than the name of the property and its type (double)? In other words is there some metadata I could retrieve about any given property against which I am reflecting, or is there a smarter way to get these attributes which might provided said metadata?
View 2 Replies
View Related
Jun 20, 2011
I created an alignment from an existing line and am having an issue with the stationing. The length of the original line is about 14,666 ft but when I convert it to an alignment it is 1,222 (1/12 of original).
View 8 Replies
View Related
Jul 10, 2012
I have a problem with my autocad. The administrator started me out on AutoCAD 2012 global.
The problem existed then so. Now he has me on AutoCAD 2012 Imperial . The problem still exists.
When I open an existing drawing that I have never opened with my version of Autocad. It opens the drawing in Metric units. I do not want Metric units. I would like it in Imperial units. Every time I open an existing drawing, I have to change the units to Architectural.
View 4 Replies
View Related
Nov 3, 2011
I need to show feet and meters in my drawing. I got them to show up, however the decimal is in the wrong spot. Instead of it being 1.8288 meters for 6 ft., it's showing as 1828.8. Everything I read says to 'just move the decimal'. But how do I do that without overriding the actual dimension?
View 4 Replies
View Related
Aug 2, 2012
Im trying to work with the General Contractor distribute bid sets to subcontractors. Im a residential architect. What are other architects doing in regards to this subject and does auto desk offer a product?
Im simply trying to compress pdf files of all my architectural/structural files and send to the builder so he can distribute. I cant seem to simply compress pdf files and attach to an email. Sending DWF files to the reproduction company seems to work ok without zipping but requires two emails. Have tried to download Winzip but not happy with them yet.
View 3 Replies
View Related
Aug 27, 2013
I'm playing with "getting started" cvs & xml data..
I load files and see the data but not the units
- In addition I can't associate items to my corridor codes (code set styles)
- also I can't use the search filter on QTO manager
Civil 3D (2013) how much you have to improve....
View 1 Replies
View Related
Jan 21, 2013
I am in the process of generating a separate package which is a suppliment to the main package for a project. The sheets from the suppliment will be incorporated into the main project, but many sheets from the main project will not be included in the suppliment.
My thought was to make a separate sheet set that shares layouts with the main set which I was able to do by making a copy and renaming the .DST file. Now I see that supposedly a single layout cannot exist in two sheet sets. I ended up working around this by creating a sheet in SSM with the same # and Name in each Sheet Set and was able to get them to appear in both. Want to find out if I'm creating a landmine of a problem down the road or if there is a better way to do what I'm doing. In the past, I beleive we simply selectively printed only the appropriate sheets but on that project it was cumbersome and at the scale of this project it will be worse.
View 8 Replies
View Related
Aug 22, 2012
I am trying to reference my room number to another table in my project. This is to satisfy a project requirements and output to a GIS attribute table.
Originally my room number is "001" and when I reference this field to another table I get "1" and drops the first two digits.
View 2 Replies
View Related
Feb 8, 2008
what the roof elevation property relates to and why? Actually, I know that it is the initial insertion point of the roof baseline, but why doesn't it update with grip edited changes in the elevation of the baseline? See the attached file. The three x-lines converge on 0,0,0. The roof elevation is stated as 0. Obviously that property is meaningless. Considering the importance of roof elevations and making them meaningful, you'd think there would be some rhyme or reason to that property.
View 4 Replies
View Related
Sep 12, 2012
So have a university campus map that was drawin in normal AutoCAD with no coordinate system. I am trying to geo-regefernce it. I was able to get ahold to a SHP file of the campus buidings from another entity on campus that have field verfied coordinates of all the buildings and drawn them in ArcGIS. What I would like to do is connect to the shape file and then move my CAD map "on top" of the shape file buildings and do any adjustments I might need. Then my CAD map would be "geo-referenced".
My problem is that when I connect to the shape file the building in the shape file are 1/12 the size of the CAD drawn buildings. I am assuming that this is because the CAD buiding were drawn as 1 unit = 1" whereas the SHP buildings were drawn as 1 unit = 1'.
I can scale down my CAD building by 1/12 .
View 1 Replies
View Related
Apr 13, 2012
I've created a Live Section Cut. I want to change the hatching in the wall sections. I looked at the Display Property of the Wall Style, but the Model Display is bold, not the Section Display. The Section display has options for Hatching, etc., but the Model Display does not...Do I need to edit the Material assigned to that wall?
View 1 Replies
View Related
Aug 18, 2011
I am working on extracting information from DWG with extended Property Set Definitions. I have added Location Property on my Door objects, and would like to retrieve it in my application.
Definition as shown in AutoCAD > Manage > Style Manager > Property Set Definitions
DoorObjects Property Set
Name: AtSpaceID
Description: Space - SpaceObjects - SpaceID
Type: Location (becomes Automatic inside .NET API code)
Source: Space - SpaceObjects - SpaceID
Space Objects Property Set
Name: SpaceID
Description: SpaceID
Type: Integer
I have tried the .NET API. see Code below. I am stuck at Property Definition Location. Not too sure where I can retrieve the value for my At Space ID at my Door Objects.
I tried the following code below and it throws error such as eInvalid Input or eNot Applicable.
Part of my code
Door doorEntity = trans.GetObject(doorObjID, OpenMode.ForRead) as Door;ObjectIdCollection idsPropSet = PropertyDataServices.GetPropertySets(doorEntity);foreach (ObjectId idPropSet in idsPropSet){ PropertySet propSet = trans.GetObject(idPropSet, OpenMode.ForRead) as PropertySet; PropertySetDefinition propSetDef =
[Code]........
View 1 Replies
View Related
Jan 12, 2009
I have created a new property set definition and added two manual property definitions and applied this to all objects. Every object on the drawings has distinct values for these two properties. These property values show correctly on the Extended Data tab of the Properties palette.
I have published to DWFX with AEC property set data set to 'Include'. In the resulting DWFX in Autodesk Design Review I can select each object and see the standard properties but not my special property set data.
View 1 Replies
View Related
Apr 18, 2012
A way to update a property set definition programmatically?
Or via a tool palette tool.... I see there is with schedules for instance a right-click option to import a schedule style to update it... but I can't find a way to do this with property set definitions.
This would be in AutoCAD Arch (or MEP) 2012 or 2013.
View 6 Replies
View Related
Oct 14, 2013
I am using Autocad Architecture 2013. When I type in "units" and hit enter, two Chinese characters show up in the command line. If I continue to hit enter, it allows me to change some values but a dialogue box never displays.
View 7 Replies
View Related
Sep 25, 2012
I have a problem when trying to import french text variables into my data sets (for automated generation of lower thirds). I can not get PS to display french special characters correct. all 'accented' As and Es etc. display as weird text strings, just like your browser running on the wrong text encoder.
How do I get PS to interpret the data sets right?
( PS CS6 (13.0.1), Mac Pro running on OS X 10.7.3)
View 4 Replies
View Related
Aug 8, 2012
I having problems trying to resolve a formula in the property definitions. I have a field that has USAGENO 060, 050 that the user inputs. But I would like to auto populate another field ROOMNAME with its corresponding text, to reduce input and avoid user error. The number always equals a room name as shown below.
060=Office
050=Lobby
I tried on the ROOMNAME field this but its not working. My field is set to formula.
=IF[USAGENO]=060,"Office",IF[USAGENO]=050,"Lobby"))
View 3 Replies
View Related
Nov 12, 2013
Any way to create a dynamic link between the property set attached to a space and excel?
I have a lots of spaces that has a property set attached, some of this property changes often. So if it was possible to create a excel sheet that presents each property for each space and then I could change the property in excel and put it back to Architecture it would save me a lot of time.
View 1 Replies
View Related
Dec 13, 2013
I am using some custom property set definitions to add information to spaces. However as I insert spaces I find that I have to go to the extra step to add the property set to the object using the Extended Data tab in the Properties Palette.
It is not a huge deal but sometimes it is forgotten and schedules are not reporting properly, or the display theme is not correct. Although there are tools to quickly add them I would like to know if there is an automatic way to add them while creating the spaces/zones.
On a related note. There is a property set definition that is in each file by default called RoomFinishObjects. Is there a way to purge this? I don't want to attach finishes to my objects. But it seems to be embedded in the file.
View 4 Replies
View Related
Sep 17, 2010
Is there a way to preset the reach of the sprout on Location Property Definitions in Property Sets?
For example, I have upper cabinets that aren't over a Space, because there isn't flooring underneath them. Because of this, the sprout reports "Space Not Found" in the cabinet schedule, and I have to go in and manually pull each sprout out until it latches onto a Space.
I would like to set all sprouts to automatically reach out 2'6" from their insertions point.
View 9 Replies
View Related
Jun 13, 2013
A coworker who is no longer with us set up the data band styles & settings in our template, and they were working fine in 2011. Then, on a new job in 2011, I encountered this problem. I gave up.
Now I'm working in 2013. The template was brought forwards, so it's the same settings, and I'm hitting the same problem as before. The difference is this time I'm working on a really long profile, and I really really want the bands to work.
Here's the problem.
The ones I checked in blue are not part of the data band. They are profile view labels, and they show the correct stations.
The ones circled in red are the data band. As you can see I need to work on my gap settings, but that's not my problem. The problem is the location of these labels. There is indeed a PVI at station 1+165, but the label is 40m away from that station! I don't know where to start digging to find the setting to tell that label to move 40m to the right, and tell 1+135.86 to move 20m to the right.
View 3 Replies
View Related
