AutoCAD Civil 3D :: Data Band At Wrong Station
Jun 13, 2013
A coworker who is no longer with us set up the data band styles & settings in our template, and they were working fine in 2011. Then, on a new job in 2011, I encountered this problem. I gave up.
Now I'm working in 2013. The template was brought forwards, so it's the same settings, and I'm hitting the same problem as before. The difference is this time I'm working on a really long profile, and I really really want the bands to work.
Here's the problem.
The ones I checked in blue are not part of the data band. They are profile view labels, and they show the correct stations.
The ones circled in red are the data band. As you can see I need to work on my gap settings, but that's not my problem. The problem is the location of these labels. There is indeed a PVI at station 1+165, but the label is 40m away from that station! I don't know where to start digging to find the setting to tell that label to move 40m to the right, and tell 1+135.86 to move 20m to the right.
View 3 Replies
ADVERTISEMENT
Nov 5, 2008
I have an EG and FG data band for sections that works correctly. When i plot sections and it asks me specify surfaces 1 and 2, I choose my EG and FG surfaces appropriately. Then when the section displays the Section 1 and Section 2 are both set to the EG section of that specific sample line. If i change the section view properties manually it works but I'll have to do it individually for each section.
Also, is it necessary to create a FG surface from the corridor or can i get the data band to read from the corridor section itself?
View 8 Replies
View Related
May 27, 2013
I've been working with Civil 3D for a while and I've gotten the Profile View and Data Bands down.Whenever we create an alignment with only two vertices (at each endpoint) and make the Northings, Eastings, and Elevations show in the data bands, the start and end show no data. (As below) Now I'm sure the data band is set up correctly because if I add a vertex somewhere along the alignment, all the missing data shows up.
View 3 Replies
View Related
Apr 7, 2012
So I've got a collection of the LabelGroupSubEntity in the ProfileDataBandLabelGroup. I need to replace some values inside them based on what Vertical Geometry Point they are labeling. Is there an easy way to determine what station value it is labeling?
View 2 Replies
View Related
May 9, 2012
As shown in the attached drawing, the station label where the superelevation transitions back into normal crown shows with 4 decimal places. We have verified that all precisions are set to 0.01ft. The normal crown station at the begin transition shows with 2 decimal places.
Civil 3D 2013 SP1
Dell T3500 Workstation
Intel Xeon E5630 @ 2.53 GHz
12 Gig of RAM
Nvidia Quadro FX3800
Window 7 x 64bit OS
View 2 Replies
View Related
May 23, 2013
i'm trying to get my data band flush with the bottom of my profile view. See attached screenshot.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
View 2 Replies
View Related
Feb 5, 2008
Is there a way to export the band data for an alignment with two profiles? I have an existing ground and a proposed profile. Can I export the station and elevation data from the band for both profiles?
View 9 Replies
View Related
Jun 14, 2013
Am I limited to the fields that appear on the label for a pipe network data band, or can I add my own customized expressions?
Using Building Design Suite Ultimate 2014
View 6 Replies
View Related
Jul 13, 2012
I want to change my elevations color to green and the other one to yelow. I can't not find this option. I using 3D 2011.
View 1 Replies
View Related
Oct 12, 2006
Where the heck do I find the offset which controls the distance between the profile grid and my profile data band?
I have compared settings between ones that look the way I want and I'm just not seeing it.
(The attached doc shows you what I'm up to)
View 9 Replies
View Related
May 13, 2013
I can label the superimposed profile but c3d uses the stations of main profile of profile view.
Thinking on the future.... c3D can have the ability of use superelevation values to calculate the right values of superimposed profiles ?
View 1 Replies
View Related
Dec 2, 2013
I need to produce a better standard table for our company, but need to know how it would be possible to display only either the START STAKE VALUE/ STATION or END STAKE VALUE/STATION in the appropriate column. If I can achieve this i would not need to details for straight segments as indicated in the details column.
View 5 Replies
View Related
Jun 1, 2010
I have been provided with Surveyed Utility Locates along an Existing Roadway. These are provided to show conflicts between the New Storm Sewer System and Existing Utilities such as Water, Sewer, Gas, Elec, etc. The survey however is incomplete as it was prepared a few years ago and the Storm Sewer has just been designed. Yes, I can create points and provide them to the County Surveying department. However, before this is done, I must provide an easily-understood format of the new survey locations to the County Project Management.
To provide a Point Table which references the Surveyed Points' location in reference to the roadway stationing (Alignment). I have attached what the point table is to look like.
I am unable to find the desired data reference in the currently provided data field selection. Am I just missing it or is this a "Wish List" item?
View 9 Replies
View Related
Nov 9, 2012
i need to guide for using sanding total station for exchange data now my question is that do there is any way in civil 3d survey menu that i can use sanding total station for exchange data?
View 1 Replies
View Related
Dec 18, 2013
How to get automaticly data on the profile. See my road profile in attachment.
Now i have to manually write data of elevation of existing and future ground and distance.
i think that is possible automaticly, but i dont know how.
View 2 Replies
View Related
Aug 29, 2013
I have created a feture line from a 2d polyline.
I have NO weed appplied and as you can see there are two errors :
- some points on original surface (used to get Z) are not interpolated.
- the quick profile shows error : in addition to lacking points, others are bad interpolated.
(the image show both)
The surface used behaves rightly with feature lines created from aligments
(I have created an aligment from polyline and then a fetaure line from that and the Z interpolation are ok )
Civil 3D (2013)
View 9 Replies
View Related
Jul 11, 2013
When the attached shape file (change soilmu_a_a.txt to .shp) is imported using MAPIMPORT the data aligns with other imported georeferenced raster imagery (said imagery was imported using the MAPIINSERT command). If the same shape file is imported using the data connect tool it shows up in a much different location (see word document).
The drawing coordinate system code is "UTM83-18F" and the data was downloaded from the Web Soil Survey's data download with the identical coordinate system (see attached readme.txt).
I prefer to use the data connect option when importing this type of shape file because I can label them all using a theme and use stylize the data for visualization/presentation.
As an aside, I have found that data connect does not automatically transform data coordinate systems to match your drawing coordinate system as advertised. I've used the edit coordinate system to no avail; however, again when the file is imported using MAPIMPORT and saved as a drawing (with native data coordinate system) and then that drawing is queried from a drawing in a different coordinate system it seems to transform the coordinate system just fine. Is this a problem with data connect?
View 7 Replies
View Related
Jun 30, 2012
I use a Sokkia total station along with a data collector. I use this to bring measurement points in to another program that will draw a scaled map. I'm forced to use this other program and its supposed to be able to export the drawing into DXF format. It wont bring in the z coordinates. Is there a way I can use the total station to collect the points and then get them into AutoCAD 2013 so i can work my magic. Basically I draw crash scenes for a police department.
View 2 Replies
View Related
May 11, 2012
How can I import a csv file produced from a total station survey containing the NEZ data from the points surveyed into AUTOCAD?
View 1 Replies
View Related
Sep 2, 2013
I am using Autocad Architecture 2013 and I am having an issue with Property Set Data. Whenever I create door or window tags, the Property Set Data is in the wrong units.
I have two separate projects, on in Imperial units and another in Metric. When I add a new door/window tag, the units for that particular door or window are incorrect. The drawings are setup in the proper units, the dimensions are as well. But when I create these tags and subsequently the schedules for them, they are in the wrong units. The tags/schedules for the metric project are in feet and inches and the tags/schedules for the imperial project are in millimeters.
View 2 Replies
View Related
Jul 1, 2012
Is there an easy way to get the geometric extents of a profile view and bands? It appears that in Civil 3D 2013 .NET the Geometric Extents returns the extents of the profile excluding the bands. I don't like the prospects of either doing the math for all of the bands assigned to the profile view or exploding the profile view to get it and the bands as a block and getting the extents that way. [URL]....
View 1 Replies
View Related
May 22, 2013
How to upload Civil 3d Sample profile with full band
View 1 Replies
View Related
Mar 5, 2012
I have a band label set up for my cross sections that will show existing grade and finish grade elevations at the 0' offset mark of each section.
However, the band does not show when I create my sections. The only way I can seem to get it to show is by right clicking a section, section view properties, bands tab, click 'import band set' at bottom of window, and select they style i want to use. But I have to do this for each section individually. That is a problem as I have over 200 sections for one piece of this project.
View 2 Replies
View Related
Oct 15, 2011
i'need to change white band to red and red band to blue in this imsge:
second band is quite easy, first is impossible
View 4 Replies
View Related
Jun 20, 2008
In the profile band the elevations are set to 3 decimal places. I just want to get it to 2 places.
View 3 Replies
View Related
Mar 21, 2012
Attached is a drawing with my profile along with elevations in the band.
UPPER BAND - has proposed road elevations on the left and existing road elevations on the right.
LOWER BAND - has pipe elevations on the left and the SAME existing road elevations on the right.
I've been messing around in the profile view properties but cannot hide the duplicate elevations in one of the bands.
View 1 Replies
View Related
Aug 26, 2013
In the Band Style_A pdf you can see the location of my elevation labels, they are below the bottom line of my profile view grid. In the Band Style_B pdf the labels are showing up in the proper location (above the bottom line of the profile view grid). To move the labels to the proper location I changed the "Gap" setting from 12.5 to -24. Is there a way to change this setting in my "style" rather than have to go make this change to the style every time I use it in a profile?
View 3 Replies
View Related
Jun 21, 2013
Labels doesn't appear in all grade breaks and seems to have a relation regarding the side of the points!!!!
View 1 Replies
View Related
Jun 25, 2012
How to make a table from a section band but from all the cross sections I have generated for a road.
View 4 Replies
View Related
Oct 29, 2013
I'm trying to create a profile view band style to display a gradient as a fraction i.e 1/100 rather than a % I've tried creating an expression to do this ( see below) the sum works but I don't get a solution/answer just the sum displayed on the band.Basically the sum is length/change in elevation
for clarification / = divide
Expression
(<[Pipe Start Chainage(Um|FD|P3|RN|AP|GC|UN|Sn|OF)]> - <[Pipe End Chainage(Um|FD|P3|RN|AP|GC|UN|Sn|OF)]>) / (<[Start Invert Level(Um|P2|RN|AP|GC|UN|Sn|OF)]> - <[End Invert Level(Um|P2|RN|AP|GC|UN|Sn|OF)]>)
View 4 Replies
View Related
Apr 4, 2012
Is there a way to get the ProfileBandLabelGroup labels from a profile view. I see I can get the ProfileViewBandItems, but don't see a way to convert it into the labels. I'm looking to override the text components. The code below does that, it's just getting the object without having to have the user select it.
ProfileBandLabelGroup labels = ssResult.ObjectId.GetObject(OpenMode.ForWrite) as ProfileBandLabelGroup;
LabelStyleTextComponent textComponent = labels.GetAt(0).GetTextComponentIds()[0].GetObject(OpenMode.ForRead) as LabelStyleTextComponent;
Autodesk.Civil.DatabaseServices.LabelGroupSubEntity label = labels.GetAt(0);
label.SetTextComponentOverride(textComponent.ObjectId, "blue");
View 3 Replies
View Related
