AutoCAD 2010 :: Importing Total Station Csv Input Data File?
May 11, 2012How can I import a csv file produced from a total station survey containing the NEZ data from the points surveyed into AUTOCAD?
View 1 Replies
ADVERTISEMENT
AutoCAD 2013 :: Total Station Import Points Without A Data Collector?
Jun 30, 2012I use a Sokkia total station along with a data collector. I use this to bring measurement points in to another program that will draw a scaled map. I'm forced to use this other program and its supposed to be able to export the drawing into DXF format. It wont bring in the z coordinates. Is there a way I can use the total station to collect the points and then get them into AutoCAD 2013 so i can work my magic. Basically I draw crash scenes for a police department.
View 2 Replies View RelatedAutoCAD Civil 3D :: Transfer Data With Sanding Total Station In Survey Menu
Nov 9, 2012i need to guide for using sanding total station for exchange data now my question is that do there is any way in civil 3d survey menu that i can use sanding total station for exchange data?
View 1 Replies View RelatedAutoCAD Civil 3D :: Angle-distance Method To Stake Out Horizontal Alignment By Total Station
Aug 3, 2013Angle-distance method to stake out the horizontal alignment by total station,Assuming that the total station with reflector is the tool that it is intended to lay out the circular curve after being designed then the only way to do so is to construct a table that contains angle-distance values.
I’m wondering if the C3D can provide this table (attached)
Revit :: Importing Room Data With Linked File
Dec 13, 2013I linked a revit file of some renovations that had been done into an older revit file. This worked fine accept it did not transfer the room data over. When i try to put new rooms in they take the volume of the older rooms not the renovation imports. Why? Why? and why?
Even if I draw out the rooms when i place the room they are still separated and defined by the older room dimensions. Thats not cool that is sad?
AutoCAD Civil 3D :: Data Band At Wrong Station
Jun 13, 2013A coworker who is no longer with us set up the data band styles & settings in our template, and they were working fine in 2011. Then, on a new job in 2011, I encountered this problem. I gave up.
Now I'm working in 2013. The template was brought forwards, so it's the same settings, and I'm hitting the same problem as before. The difference is this time I'm working on a really long profile, and I really really want the bands to work.
Here's the problem.
The ones I checked in blue are not part of the data band. They are profile view labels, and they show the correct stations.
The ones circled in red are the data band. As you can see I need to work on my gap settings, but that's not my problem. The problem is the location of these labels. There is indeed a PVI at station 1+165, but the label is 40m away from that station! I don't know where to start digging to find the setting to tell that label to move 40m to the right, and tell 1+135.86 to move 20m to the right.
AutoCAD Civil 3D :: Label Superimposed Profile With Its Station Data?
May 13, 2013I can label the superimposed profile but c3d uses the stations of main profile of profile view.
Thinking on the future.... c3D can have the ability of use superelevation values to calculate the right values of superimposed profiles ?
AutoCAD Civil 3D :: Alignment Table - Setting Out Data - Stake / Station Value
Dec 2, 2013I need to produce a better standard table for our company, but need to know how it would be possible to display only either the START STAKE VALUE/ STATION or END STAKE VALUE/STATION in the appropriate column. If I can achieve this i would not need to details for straight segments as indicated in the details column.
View 5 Replies View RelatedAutoCAD Civil 3D :: Point Table With Alignment Station Data Field?
Jun 1, 2010I have been provided with Surveyed Utility Locates along an Existing Roadway. These are provided to show conflicts between the New Storm Sewer System and Existing Utilities such as Water, Sewer, Gas, Elec, etc. The survey however is incomplete as it was prepared a few years ago and the Storm Sewer has just been designed. Yes, I can create points and provide them to the County Surveying department. However, before this is done, I must provide an easily-understood format of the new survey locations to the County Project Management.
To provide a Point Table which references the Surveyed Points' location in reference to the roadway stationing (Alignment). I have attached what the point table is to look like.
I am unable to find the desired data reference in the currently provided data field selection. Am I just missing it or is this a "Wish List" item?
AutoCAD 2010 :: Data Extraction DXE File
Feb 3, 2010I am creating a schedule with a .dxe file, which extracts data from attributes into a schedule. Is there a way to link this file so it is a "relative path" instead of a full path. IE: The .dxe file is liked to the same folder that contains the current drawing, not linked to my C:/AutoCad drawings/Job Name/folder2... I really want to be able to move the drawing and .dxe to a different folder and not have the link broken.
View 4 Replies View RelatedAutoCAD 2010 :: Importing Layers From Existing DWG File To Another?
Jul 29, 2012Is there a method to import Layers from existing DWG file to another? I want to import all layers with their names.
View 3 Replies View RelatedAutoCAD 2010 :: Importing / Creating Layers From XLS / CSV / LAS File
Feb 10, 2012I want to create a whole load of layers (approx 150) by importing them from a xls spreadsheet into my AutoCAD layer manager. How this is achieved without having to create each layer at a time by manual entry? Note that I created a .las file (attached as a .txt version) based upon exporting an existing set of layers to a .las file and then amending it. However, after saving the amended .las file it would not re import into the layer manager.
View 1 Replies View RelatedAutoCAD Civil 3D :: Data Of Existing / Future Ground And Station On Profile Of Road
Dec 18, 2013How to get automaticly data on the profile. See my road profile in attachment.
Now i have to manually write data of elevation of existing and future ground and distance.
i think that is possible automaticly, but i dont know how.
AutoCAD 2010 :: ASCII File With XYZ Coordinate Data
Nov 22, 2011I have a .PTS file (an ASCII file with XYZ coordinate data + two additional sets of info per point). Is there any way to bring this into AutoCAD natively?
View 7 Replies View RelatedAutoCAD 2010 :: How To Plot (draw) Xy Data Saved In CSV File
Feb 25, 2012How to plot (draw) the xy data saved in a CSV file?
I’m not sure if there is an enhanced workflow to plot the xy coordinates saved in an CSV file in the AutoCAD 2012.
I found the approach below in the web
----------
1.Open the Excel file.
2. Save it as a .CSV file (comma separated values).
3. Open the .CSV file in notepad, add two lines at the top:
._multiple
._point
4. Then save this file with a .SCR file extension.
5. In AutoCAD run the ._Script command, and pick the .SCR file above.
AutoCAD 2010 :: Total Length Of Objects
Dec 5, 2013How Do I find the total length of several objects or separate lines without having to click on each one individually and add them up.
View 5 Replies View RelatedAutoCAD 2010 :: Create Or Edit BLK File To Use With Data Extraction Command
May 24, 2013I want to add an attribute to a BLK file I have from a past release. Using this .BLK file, I can create a table from attributes in my drawing using a LISP routine.
It seems there is no way to create or edit a .BLK file that I can use for this in ACAD 2011, it only creates .DXE files.
The problem with the .DXE file is that is saves the drawing that the original extraction is performed on. When I use the .DXE in another drawing, it uses the original drawing data unless I manually "delete" the old drawing reference using the dialog box in the extraction wizard.
The .BLK file works perfectly, but I want to add an attribute. How can I create a new, or edit my old .BLK file?
Will I have to reinstall an older version of AutoCAd to accomplish this?
AutoCAD Visual LISP / AutoLISP :: Automated Drawing Using Input Data?
Jul 4, 2013I would like to automate drawing process for certain data. Using some LISP codes User will be asked to provide some data and using that data an automatic drawing needed to be developed at Drawing editor of AutoCAD. For example;
Enter the width of Sheet: 50 mm
enter the length of Sheet: 200 mm
Enter the sheet thickness: 5mm
Enter type of feed: Automatic
Are there holes in Strip: Yes/No
Specify nu of holes: 5
Position of holes Centre: 5,5
Distance between the holes: At an interval of 20mm each
I just need a LISP code for such program.
AutoCAD 2010 :: Command To Add All Dimensions Together To Give Grand Total
Jul 24, 2012Is there a command or script in Autocad 2012 that will add all your dimensions together to give you a grand total?
View 1 Replies View RelatedLightroom :: 4 Map Mode - Input GPS Data (Latitude / Longitude)
May 1, 2012I wish to input the GPS data (latitude, longitude) manually in the ways:
- Insert the value directly into the GPS field on the image (in map mode). It is pretty hard. In fact, I try to copy/paste value but I failed. I wish to be able to simply add manually GPS data to a picture.
- Move the map to a point giving llatitude, longitude. Maybe add a field close to "search".
Maya :: Excel Spread Sheet Data As Input For Animation?
Aug 16, 2012I have a spreadsheet in Excel that is split into columns. The first is the frame number, and the subsequent columns are the rotations about the X, Y and Z axis. There is also a column that has the location in the Z axis from the origin (0). These values are currently being input manually and keyed. The object being animated is a locator node which will form the parent of an object.
Is there a way to have these values read in automatically and for each frame to then be keyed to that value?
As I've never touched MEL or Python I wouldn't have a clue where to start trying to write some sort of script to do this.
AutoCAD 2010 :: LT Crashes When Keyboard Input
Feb 6, 2013The program crashes when I try to enter numbers.For example when I want to move a line 12" and select move then go to type in 12 the AutoCAD program disappears. I am using Windows 7.
View 9 Replies View RelatedAutoCAD 2010 :: Dynamic Input Angles
May 30, 2012When I create a line using dynamic input, I key in the length, TAB, and the angle. Is there a toggle setting somewhere that will allow me to enter angles greater than 180°? Drawing Units are set to Base angle north (270°) angles in D-M-S measured clockwise, yet dynamic input angles are measured from east (0°) both clockwise and counterclockwise. I.E. an input of 90° gives me either north or south, depending on where the cursor is located.
Ideally, I would like to be able to enter either 225° or -135° and have the line head off to the southwest. So far, I'm stymied and have to resort to command line entry. How to make dynamic input do what I want it to?
AutoCAD 2010 :: Dimension Input Prompt
Aug 15, 2011What or where is the setting to change the dimension value input to automatic rather than accepting the default every time I put a dimension in? I don't want to be prompted for input.
View 8 Replies View RelatedAutoCAD 2013 :: Importing Data
Jul 17, 2012Using AutoCAD 2013 and a basemap that was created in an earlier version of AutoCAD (likely 2002), the coordinates of points exported from surveying equipment are changed when imported into the basemap. Why would the coordiantes be changing when placed on a basemap?
View 1 Replies View RelatedAutoCAD Map 3D :: Importing ESRI Data Into Map
Oct 25, 2008I have a directory that contains .dbf, .prj, .sbn, .sbx, .shp & .shx files. How do import or use this data in Autodesk Map?Also, I would like to know about obtaining GIS training.
View 9 Replies View RelatedAutoCAD Civil 3D :: Importing GIS Data
Feb 10, 2011I'm working in C3D 2009 and I have received some GIS data files that I would like to import. I don't work with GIS files in my daily work so I am not familiar with them. Although I have an idea of what kind of information can be stored in the GIS files. I've managed to get the data into my drawing using mapimport, but how do I know that I have successfully inserted all of the information that was sent to me?
I was given shx, shp, dbf, idx, prj, sbn, sbx, and xml files. All I have in my drawing are polylines that have a little bit of extra information when the properties box is displayed. It just seems like a lot of files to be sent to only receive a polyline. Although all of the files except the shp files have only 1kb file sizes, and the shp file is 400 kb. So perhaps I was just sent extra files?
AutoCad :: Importing Excel Data
Apr 6, 2010I am having a problem with my table that I insert from excel into ACAD 2010. The Data in excel is on automatic color and arial text, once imported into ACAD as ACAD entities the data in my table does not want to change to being bylayer as the cell type is set to but instead stays on white. The only way I can change the color is by entering the cell and changing it manually to bylayer.
View 9 Replies View RelatedAutoCad :: Importing Z X Y Data Into And Out Of 2011?
Jul 1, 2011any free (not trial) software that would allow me to import z x y corordintaes into autocad 2011.
Also is there anyway of exporting x y z data out of autocad?
AutoCAD Civil 3D :: Combining Feature Data (Adding Data To Shape File)
Apr 24, 2012I have a master shape file that contains parcel ID, owner, tax info., etc. I have another file ( access 2003 -open to better file format suggestions-) which contains parcel ID and a "yes" or " no" entry for whether or not the parcel needs a new water meter. All I want to do is add the water meter information into the other shape file. This would create one shape file with one table with all the information that I need.
Ultimately I will use the information to do a map query and find out spatially where i need new water meters.
Right now i have the master shape file connected though the “Connect to Data” feature. I also have the new data added to the drawing though the Data sources------>attach under the “Map Explorer” Task pane. I attached access file (ver. 2003 .mdb) which has two columns “Parcel ID” and “Meter”.
I right click on the shape file under the display manager and select”Create a Join;” however my water meter table is not listed as an option. Will this not work?
Plan B - I tried to Create and connect to the access file as an ODBC connection. Followed this guy’s directions to a T [URL]. But when i populate my table under the fdo connection the column headings exist ( “parcel ID” and “Meter”) but the actual data is missing. Am I missing something important?
Note: I am running c3d 2012 on a Win 7 64 Bit machine. I also removed office 32 bit apps and installed 64 bit apps to see if that would solve the problem. No go.
AutoCAD Civil 3D :: Importing GIS Data For Inlets
Jan 7, 2013I see you can import junctions from GIS shapefiles, but can you import inlets? I have hundreds of inlets (mostly grate inlets) and I need to import the inlet type and inlet opening dimensions. I have a shap file with the inlet data, but I'm unable to import it into SSA with all the information I need.
I know you can import shapefiles as junctions and convert them to inlets, but then you would have to manually input the dimensions of the inlet. Is it possible for SSA to automate this processs?