AutoCAD Civil 3D :: Missing Band Data At Endpoints
May 27, 2013
I've been working with Civil 3D for a while and I've gotten the Profile View and Data Bands down.Whenever we create an alignment with only two vertices (at each endpoint) and make the Northings, Eastings, and Elevations show in the data bands, the start and end show no data. (As below) Now I'm sure the data band is set up correctly because if I add a vertex somewhere along the alignment, all the missing data shows up.
View 3 Replies
ADVERTISEMENT
Nov 5, 2008
I have an EG and FG data band for sections that works correctly. When i plot sections and it asks me specify surfaces 1 and 2, I choose my EG and FG surfaces appropriately. Then when the section displays the Section 1 and Section 2 are both set to the EG section of that specific sample line. If i change the section view properties manually it works but I'll have to do it individually for each section.
Also, is it necessary to create a FG surface from the corridor or can i get the data band to read from the corridor section itself?
View 8 Replies
View Related
Jun 13, 2013
A coworker who is no longer with us set up the data band styles & settings in our template, and they were working fine in 2011. Then, on a new job in 2011, I encountered this problem. I gave up.
Now I'm working in 2013. The template was brought forwards, so it's the same settings, and I'm hitting the same problem as before. The difference is this time I'm working on a really long profile, and I really really want the bands to work.
Here's the problem.
The ones I checked in blue are not part of the data band. They are profile view labels, and they show the correct stations.
The ones circled in red are the data band. As you can see I need to work on my gap settings, but that's not my problem. The problem is the location of these labels. There is indeed a PVI at station 1+165, but the label is 40m away from that station! I don't know where to start digging to find the setting to tell that label to move 40m to the right, and tell 1+135.86 to move 20m to the right.
View 3 Replies
View Related
Apr 7, 2012
So I've got a collection of the LabelGroupSubEntity in the ProfileDataBandLabelGroup. I need to replace some values inside them based on what Vertical Geometry Point they are labeling. Is there an easy way to determine what station value it is labeling?
View 2 Replies
View Related
May 9, 2012
As shown in the attached drawing, the station label where the superelevation transitions back into normal crown shows with 4 decimal places. We have verified that all precisions are set to 0.01ft. The normal crown station at the begin transition shows with 2 decimal places.
Civil 3D 2013 SP1
Dell T3500 Workstation
Intel Xeon E5630 @ 2.53 GHz
12 Gig of RAM
Nvidia Quadro FX3800
Window 7 x 64bit OS
View 2 Replies
View Related
May 23, 2013
i'm trying to get my data band flush with the bottom of my profile view. See attached screenshot.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
View 2 Replies
View Related
Feb 5, 2008
Is there a way to export the band data for an alignment with two profiles? I have an existing ground and a proposed profile. Can I export the station and elevation data from the band for both profiles?
View 9 Replies
View Related
Jun 14, 2013
Am I limited to the fields that appear on the label for a pipe network data band, or can I add my own customized expressions?
Using Building Design Suite Ultimate 2014
View 6 Replies
View Related
Jan 20, 2010
I cannot for the life of me get the start and end labels for any band to display within a profile view. Each band has the 'label start' and 'label end' labels ticked and the major/minor labels display at every other point but don't display anything at the start of the view or end. The profile views are taken from a simple straight alignment and the profiles themselves extend the full length of the view.
View 9 Replies
View Related
Jul 13, 2012
I want to change my elevations color to green and the other one to yelow. I can't not find this option. I using 3D 2011.
View 1 Replies
View Related
Oct 12, 2006
Where the heck do I find the offset which controls the distance between the profile grid and my profile data band?
I have compared settings between ones that look the way I want and I'm just not seeing it.
(The attached doc shows you what I'm up to)
View 9 Replies
View Related
Sep 9, 2011
i have created a data band in profile view that should show a created profiles elevation, but some of the the data fields are missing irregulary. Also in the data band that shoud show the diferenece betven the tow profiles - EG and the new profile the data is missing. The EG profiles data and the surface are ok all is shown.
View 4 Replies
View Related
May 3, 2013
I've just installed Civil3D, 64-bit on windows 7(running on bootcamp) and am trying to insert a georeferenced raster image but have encountered some issues.
1. "Home tab>>Data panel>>>insert An Image" - The data panel is missing and it's also not found in "customize palettes"
2. Trying the data connect route does not work either: Display manager>>>Data>>>Connect To Data - There is no 'Data' option and I cannot connect to Data.
View 1 Replies
View Related
Feb 21, 2011
I have a drawing that contains an alignment and 2 profiles (existing and proposed). Call this File A.
I created data shortcuts for these 3 objects and reference them in many drawings.
Last week File A was having some problems, it was inexplicably large and seemed to have some corruption I couldn't fix. So I created a new drawing, call it File B, and promoted the alignment and profiles into it.
I used Data Shortcut Editor to point the data shortcuts to File B. In drawings that already referenced these objects they look like the they are coming through just fine.
The problem is that I can't see the profiles listed in the Data Shortcuts section of prospector. The shortcuts folder selected is correct, the xml file is there, it points to File B. The alignment is listed and I can create that reference in a new drawing. I also can't find anything wrong with File B.
View 9 Replies
View Related
Nov 13, 2012
Civil 3D 2012. One structure in my pipe network is not following along when the network is data-referenced in to other plan drawings. The structure is present in the source drawing, and included in the network, along with the pipes that are connected to it. All other structures and pipes are operating fine.
View 3 Replies
View Related
Jul 1, 2012
Is there an easy way to get the geometric extents of a profile view and bands? It appears that in Civil 3D 2013 .NET the Geometric Extents returns the extents of the profile excluding the bands. I don't like the prospects of either doing the math for all of the bands assigned to the profile view or exploding the profile view to get it and the bands as a block and getting the extents that way. [URL]....
View 1 Replies
View Related
May 22, 2013
How to upload Civil 3d Sample profile with full band
View 1 Replies
View Related
Mar 5, 2012
I have a band label set up for my cross sections that will show existing grade and finish grade elevations at the 0' offset mark of each section.
However, the band does not show when I create my sections. The only way I can seem to get it to show is by right clicking a section, section view properties, bands tab, click 'import band set' at bottom of window, and select they style i want to use. But I have to do this for each section individually. That is a problem as I have over 200 sections for one piece of this project.
View 2 Replies
View Related
Oct 15, 2011
i'need to change white band to red and red band to blue in this imsge:
second band is quite easy, first is impossible
View 4 Replies
View Related
Jun 20, 2008
In the profile band the elevations are set to 3 decimal places. I just want to get it to 2 places.
View 3 Replies
View Related
Mar 21, 2012
Attached is a drawing with my profile along with elevations in the band.
UPPER BAND - has proposed road elevations on the left and existing road elevations on the right.
LOWER BAND - has pipe elevations on the left and the SAME existing road elevations on the right.
I've been messing around in the profile view properties but cannot hide the duplicate elevations in one of the bands.
View 1 Replies
View Related
Aug 26, 2013
In the Band Style_A pdf you can see the location of my elevation labels, they are below the bottom line of my profile view grid. In the Band Style_B pdf the labels are showing up in the proper location (above the bottom line of the profile view grid). To move the labels to the proper location I changed the "Gap" setting from 12.5 to -24. Is there a way to change this setting in my "style" rather than have to go make this change to the style every time I use it in a profile?
View 3 Replies
View Related
Jun 21, 2013
Labels doesn't appear in all grade breaks and seems to have a relation regarding the side of the points!!!!
View 1 Replies
View Related
Jun 25, 2012
How to make a table from a section band but from all the cross sections I have generated for a road.
View 4 Replies
View Related
Oct 29, 2013
I'm trying to create a profile view band style to display a gradient as a fraction i.e 1/100 rather than a % I've tried creating an expression to do this ( see below) the sum works but I don't get a solution/answer just the sum displayed on the band.Basically the sum is length/change in elevation
for clarification / = divide
Expression
(<[Pipe Start Chainage(Um|FD|P3|RN|AP|GC|UN|Sn|OF)]> - <[Pipe End Chainage(Um|FD|P3|RN|AP|GC|UN|Sn|OF)]>) / (<[Start Invert Level(Um|P2|RN|AP|GC|UN|Sn|OF)]> - <[End Invert Level(Um|P2|RN|AP|GC|UN|Sn|OF)]>)
View 4 Replies
View Related
Apr 4, 2012
Is there a way to get the ProfileBandLabelGroup labels from a profile view. I see I can get the ProfileViewBandItems, but don't see a way to convert it into the labels. I'm looking to override the text components. The code below does that, it's just getting the object without having to have the user select it.
ProfileBandLabelGroup labels = ssResult.ObjectId.GetObject(OpenMode.ForWrite) as ProfileBandLabelGroup;
LabelStyleTextComponent textComponent = labels.GetAt(0).GetTextComponentIds()[0].GetObject(OpenMode.ForRead) as LabelStyleTextComponent;
Autodesk.Civil.DatabaseServices.LabelGroupSubEntity label = labels.GetAt(0);
label.SetTextComponentOverride(textComponent.ObjectId, "blue");
View 3 Replies
View Related
Feb 26, 2012
I need to develop a custom looking band for Profile View. Is it possible with .Net? Where can I find any info about how to do it?
View 1 Replies
View Related
Jan 23, 2011
I'm currently setting up a band set and want to include a band "pipe invert depth" i.e. basically trench depth.
There are properites in the band label style composer for "pipe invert level" and for "cover" and for "pipe diameter" but not pipe invert depth.Is there a way to display the pipe invert depth relative to the reference (design) surface/alignment?
A secondary question to this is can you use basic arithmetic in the band label style composer? eg pipe cover + pipe diameter?
View 9 Replies
View Related
Jan 16, 2013
I did a grading, created surface with it and draw a profile view. Everything seems to be good, except with the vertical geometry band. I need to fix slope and length only at break point, means PI (blue line), but aligment has created more PI with each surface tringular line at intersection (us i note). Is there any why to specify PI only at a break points?
I can erase PI manually on static profile view mode, but i desire to do it in dynamic mode..., in case when conditions changes.
View 2 Replies
View Related
Nov 28, 2012
i've got a profile band for my finished grade profile. it works great except for where a pvi falls at a major or minor station, the profile band is blank. is there a way to get the finished grade elevation to show in the band at a pvi?
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
View 1 Replies
View Related
Dec 12, 2013
When I generate a band and the points that need to be labelled are very close to each other there is the possibility to stagger the labels (left, right, to both sides).
This works as I would expect it to.What I haven’t been able to determine is whether it is possible to adjust or influence the spacing between the staggered labels.
View 2 Replies
View Related
