i've got a profile band for my finished grade profile. it works great except for where a pvi falls at a major or minor station, the profile band is blank. is there a way to get the finished grade elevation to show in the band at a pvi?
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
How do I get my finished grade on ALL my cross-sections at once? I'm getting the existing grade for both section 1 and section 2 grade in the band.
View 3 Replies View RelatedWhat I would like to achieve is a section band style for bulk earthworks and simple access roads that shows the design level at Grade Breaks only. The problem I am having is that Grade Breaks are being recognised as where the sample line crosses a triangle, not where the the grade actually changes/crosses a feature line.
A have a number of simple platforms, that I have created using an infill from feature lines, usually these platforms are surrounded entirely by feature lines of the same height. As to be expected, Civil 3d creates a few flat triangles, and as a consequence, all of the points where the sample line crosses these show up on my band style. Is there any way to achieve this band style?
In the profile band the elevations are set to 3 decimal places. I just want to get it to 2 places.
View 3 Replies View RelatedC3D 2012
I want to set and Elevation Point (not a PI Point) along a feature line by entering the grade from the previous point. Currently the "Set Elevation Point" command only allows entering an elevations or getting an elevation from the surface. I know I can set an elevation point and then use the "quick elevation editor" to adjust the grade, but I don't want to go through the extra step.
i created section view as in pic1. In Bands, Existing surface elevation labels at existing surface grade breaks, top of road elevation labels at top grade breaks, datum is the same. Can i add existing surface elevation labels at top of road grade breaks? (pic2)
View 7 Replies View RelatedAs shown in the attached drawing, the station label where the superelevation transitions back into normal crown shows with 4 decimal places. We have verified that all precisions are set to 0.01ft. The normal crown station at the begin transition shows with 2 decimal places.
Civil 3D 2013 SP1
Dell T3500 Workstation
Intel Xeon E5630 @ 2.53 GHz
12 Gig of RAM
Nvidia Quadro FX3800
Window 7 x 64bit OS
How to add super elevation detail on Profile band.
View 1 Replies View RelatedC3D 2012 SP3 on Win 7 Pro:
I have an alignment with horizontal PVI points that are coincidental with COGO points. I want to display in a profile view, a surface elevation at the alignment PVI points in a band style. Is it possible to do this? If so, how?
i was wondering is it possible to show slopes or grades on my surfaces , or corridors IN PLAN VIEW ?
View 8 Replies View RelatedI am creating profiles and I can not get the existing grade linetype to show up as a uniformed dashed line. The layer is set up for a dashed line but the existing profile line is made up of too many nodes to make the linestyle look right.
View 9 Replies View RelatedI created a new surface, pasted my OG surface into it, set the build to exclude elevations less than and greater than but my surface still is showing every contour range. I want to only show contours at elevations of 371.5 and 370.5
Is it because it's a pasted surface?
How to compare two surfaces and show with colors the elevation differences between the two. My question is when selecting a elevation range, I would like to have more colors plotted. This is hard to explain.
If I have say 8 elevation ranges in my analysis tab, I see it starts with red and goes to green. If I increase the range, I get into the blues. How can I expand the colors so If I only have 6 or 8 ranges that I see more colors and less shades of red. (by the way, I have selected rainbow color scheme)
I am working on a large park project. I have a proposed and existing surface. I have created a volume surface to show elevation banding with cut and fill ranges. I need to create a drawing for someone who doesn't have civil 3d showing all the "cut" areas. They really want a boundary of hatch. What is the best way to do this after I change my analysis to -30 feet cut to 0 feet cut.
View 9 Replies View RelatedI am trying to create an elevation label that will give me the spot elevation followed by the letters "TC" and then on the line below subtract 4 inches from the elevation followed by the letters "BC". It's easy enogh to add the letters but the simple equation of elevation - 4 inches eludes me.
View 3 Replies View RelatedWhen I snap a point to an object, the point takes on the elevation of the object. I would rather the point's elevation stay as is.
-changing osnapz variable
-latest civil 3d service pack
A few weeks ago I did not have this problem but once my computer was switched to the company's global server and c3d was reinstalled the problem appeared. Furthermore (post switchover), when a colleage of mine prepared a simple test drawing with just a line and a point, he was able to snap to that line without the point changing elevation. When he sent that drawing to me and I tried snapping the point to the object, the same problem occured with the point taking the elevation of the line object. I suspect it is a system variable issue
i have some existing drainage pipe and structures in a base plan that i need to change the invert (which is the easy part) and the top elevation to the existing top elevation that does not meet the minimum presect in civil 3d 2012 is there a way to change these min. to match my exisitng elevation for example i have a catch basin invert is 15.45 top is 17.56 with a 18" rcp the cover will be less than 12" and i need to change this.
View 3 Replies View RelatedAnother collaboration question so you have a compressed design program and want the drainage to be designed while the finshed surface is yet to be completed.
View 5 Replies View RelatedHow to bring in the Finished Road Section on a longitudinal profile @ point on tie in. For example three road A, B and C are tieing in to Road X at different stations. I have profile of all the roads. and I want to change the profile of road X with reference to road A,B and C. for that I need reference road section of Road A,B and C on longitudinal profile of road X. How this can be achieved.
View 2 Replies View RelatedI'm working on a grading plan which excavates down from just outside the waterline of an existing pond. When I create a surface from the grading, it looks like a whole bunch of strange break lines have been added, messing up the surface. I thought it might be the mid ordinate distance but changing that doesn't seem to fix it it. Interestingly, when I grade from the original waterline, this doesn't seem to happen.
Here is my workflow, a picture of the result is shown below.
1. Turned the current waterline into a feature line.
2. Created new feature line by offsetting outside that feature line by 3.16 ft.
3. From new feature line, grade down 10 feet at 3:1
4. Create new surface using grading.
The grading lines (shown in white) look correct. But when I create the surface (green and yellow), it is all messed up.
I want to create a grade (without object grade) using a corridor. This is my assembly:
This only contains the sub assembly "DaylightBench" in the side right.
I have the alignment and profile. I have created the corridor.
red line= alignment
green line= feature line (code Intersecction) converted to polyline.
pink surface= surface (code TOP).
I have added a boundary for surface of type "add from polygon" and I have selected the closed polyline(green line).
However, the boundary seems doesn´t work.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
I have a profile set up with a surface an alignment and a Water Main. I would like to place grade breaks (Using Profile labels) every 100' along the surface however the increment field isn't available for grade breaks. Weeding doesn't work because it needs to be exactly every 100' I was thinking of creating an expression for it however I still haven't reached that level of expertise.
View 5 Replies View RelatedI noticed a post a few years ago mentioning this function wasn't available then. Is it still not available? Is there a routine? A lisp? An expression that I can make to put a slope arrow inside every tin in my surface with a % grade?
View 1 Replies View RelatedWhy do profile grade markers always reset in section views? This has to have been a wish list item. lsp or software to populate these? I heard in 2014 they still disappear.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram
I was laying out a vertical curve in the roadway profile. I have a vertical curve of 100' in length, however immediately after that it shows a grade break. I do not want this grade break in my profile, I simply want a vertical curve with two grades on the left and right sides. How can I get 2009 C3D to remove the grade breaks? It would be very uncomfortable for someone to have to drive over these in the real world.
View 1 Replies View Relatedi have a corridor. the corridor feature line that is supposed to hit the proposed centerline is following my existing grade instead of where the profile is. in other words, the corridor line i need at the centerline when i do "feature lines from corridor" is following my existing grade instead of the top of my road. did i accid. change something? i need it to follow the top centerline of my road. the red arrow is the line i need at the top centerline.
View 3 Replies View RelatedI was wondering if there is a way that I can take an existing grade surface and apply a designed pond surface.
Right now I have the pond as a set of 3d Polylines in the proper geometry.
I want to place the pond into this surface and cut/fill at a 3:1 from that pond to the existing surface.
We are working on a road widening scheme where one edge of the road is retained as far as possible while other edge being widened. I like to design a retained channel line by extending the cross fall between the existing center line and the exiting channel line on to the design one.
It is possible in civil 3d to extend the gradient between two feature lines at some offset from reference feature line?
i've got a profile with a lot of grade labels, some of which i've turned the visibiliy off. i need to turn some, but not al,l of them on.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
I have labled for grade break on the profile, but it did not lable all break line? how to add grade breaks along the new profile (see attached image).
View 1 Replies View RelatedI've got a drawing in which the existing ground is so jaggedy that I've got way too many grade breaks (see the attached image). I know I can use the weeding and eliminate the labels every 50 feet, or so, along the profile. But I need to have the ability to only show a specific grade break range. For instance, I'd like for my profile only to display grade breaks between 0% and 2% and not to display anything above 2%. I've tried making an expression, but have been hitting brick walls. I also know I can manually (use the CTRL + click) select the specific labels that I don't want and erase them, but I've got lots of these labels. Any LISP routine or an expression that can accomplish this? [URL]
View 9 Replies View Related