AutoCAD Civil 3D :: Develop Custom Band For ProfileView
Feb 26, 2012I need to develop a custom looking band for Profile View. Is it possible with .Net? Where can I find any info about how to do it?
View 1 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: ProfileView Band Extents
Jul 1, 2012Is there an easy way to get the geometric extents of a profile view and bands? It appears that in Civil 3D 2013 .NET the Geometric Extents returns the extents of the profile excluding the bands. I don't like the prospects of either doing the math for all of the bands assigned to the profile view or exploding the profile view to get it and the bands as a block and getting the extents that way. [URL]....
View 1 Replies View RelatedAutoCAD Civil 3D :: Pick Profileview From Drawing
Jan 23, 2007I want to create a function to pick a profileView(Alignment/.. in the future) in the drawing. I just get entity which type is Autodesk.AutoCAD.DatabaseServices.ImpCurve from GetEntity, and I failed when I try to cast it to Autodesk.AECC.Interop.Land.AeccProfileView. Is there any way I can pick a profile from drawing in .net?
Civil 3D 2007 and Visual Studio 2005
AutoCAD Civil 3D :: Profile View / Band
May 22, 2013How to upload Civil 3d Sample profile with full band
View 1 Replies View RelatedAutoCAD Civil 3D :: Cross Section Band
Mar 5, 2012I have a band label set up for my cross sections that will show existing grade and finish grade elevations at the 0' offset mark of each section.
However, the band does not show when I create my sections. The only way I can seem to get it to show is by right clicking a section, section view properties, bands tab, click 'import band set' at bottom of window, and select they style i want to use. But I have to do this for each section individually. That is a problem as I have over 200 sections for one piece of this project.
Photoshop :: Change White Band To Red And Red Band To Blue?
Oct 15, 2011i'need to change white band to red and red band to blue in this imsge:
second band is quite easy, first is impossible
AutoCAD Civil 3D :: Section Data Band Properties
Nov 5, 2008I have an EG and FG data band for sections that works correctly. When i plot sections and it asks me specify surfaces 1 and 2, I choose my EG and FG surfaces appropriately. Then when the section displays the Section 1 and Section 2 are both set to the EG section of that specific sample line. If i change the section view properties manually it works but I'll have to do it individually for each section.
Also, is it necessary to create a FG surface from the corridor or can i get the data band to read from the corridor section itself?
AutoCAD Civil 3D :: Profile Band Elevation Precision?
Jun 20, 2008In the profile band the elevations are set to 3 decimal places. I just want to get it to 2 places.
View 3 Replies View RelatedAutoCAD Civil 3D :: Hiding Profile Elevations In The Band
Mar 21, 2012Attached is a drawing with my profile along with elevations in the band.
UPPER BAND - has proposed road elevations on the left and existing road elevations on the right.
LOWER BAND - has pipe elevations on the left and the SAME existing road elevations on the right.
I've been messing around in the profile view properties but cannot hide the duplicate elevations in one of the bands.
AutoCAD Civil 3D :: Profile Band Style Setting?
Aug 26, 2013In the Band Style_A pdf you can see the location of my elevation labels, they are below the bottom line of my profile view grid. In the Band Style_B pdf the labels are showing up in the proper location (above the bottom line of the profile view grid). To move the labels to the proper location I changed the "Gap" setting from 12.5 to -24. Is there a way to change this setting in my "style" rather than have to go make this change to the style every time I use it in a profile?
View 3 Replies View RelatedAutoCAD Civil 3D :: Section View Band Label Not Appear
Jun 21, 2013Labels doesn't appear in all grade breaks and seems to have a relation regarding the side of the points!!!!
View 1 Replies View RelatedAutoCAD Civil 3D :: How To Make A Table From A Section Band
Jun 25, 2012How to make a table from a section band but from all the cross sections I have generated for a road.
View 4 Replies View RelatedAutoCAD Civil 3D :: Pipe Gradient Band Style
Oct 29, 2013I'm trying to create a profile view band style to display a gradient as a fraction i.e 1/100 rather than a % I've tried creating an expression to do this ( see below) the sum works but I don't get a solution/answer just the sum displayed on the band.Basically the sum is length/change in elevation
for clarification / = divide
Expression
(<[Pipe Start Chainage(Um|FD|P3|RN|AP|GC|UN|Sn|OF)]> - <[Pipe End Chainage(Um|FD|P3|RN|AP|GC|UN|Sn|OF)]>) / (<[Start Invert Level(Um|P2|RN|AP|GC|UN|Sn|OF)]> - <[End Invert Level(Um|P2|RN|AP|GC|UN|Sn|OF)]>)
AutoCAD Civil 3D :: Data Band At Wrong Station
Jun 13, 2013A coworker who is no longer with us set up the data band styles & settings in our template, and they were working fine in 2011. Then, on a new job in 2011, I encountered this problem. I gave up.
Now I'm working in 2013. The template was brought forwards, so it's the same settings, and I'm hitting the same problem as before. The difference is this time I'm working on a really long profile, and I really really want the bands to work.
Here's the problem.
The ones I checked in blue are not part of the data band. They are profile view labels, and they show the correct stations.
The ones circled in red are the data band. As you can see I need to work on my gap settings, but that's not my problem. The problem is the location of these labels. There is indeed a PVI at station 1+165, but the label is 40m away from that station! I don't know where to start digging to find the setting to tell that label to move 40m to the right, and tell 1+135.86 to move 20m to the right.
AutoCAD Civil 3D :: Profile View Band Labels
Apr 4, 2012Is there a way to get the ProfileBandLabelGroup labels from a profile view. I see I can get the ProfileViewBandItems, but don't see a way to convert it into the labels. I'm looking to override the text components. The code below does that, it's just getting the object without having to have the user select it.
ProfileBandLabelGroup labels = ssResult.ObjectId.GetObject(OpenMode.ForWrite) as ProfileBandLabelGroup;
LabelStyleTextComponent textComponent = labels.GetAt(0).GetTextComponentIds()[0].GetObject(OpenMode.ForRead) as LabelStyleTextComponent;
Autodesk.Civil.DatabaseServices.LabelGroupSubEntity label = labels.GetAt(0);
label.SetTextComponentOverride(textComponent.ObjectId, "blue");
AutoCAD Civil 3D :: Missing Band Data At Endpoints
May 27, 2013I've been working with Civil 3D for a while and I've gotten the Profile View and Data Bands down.Whenever we create an alignment with only two vertices (at each endpoint) and make the Northings, Eastings, and Elevations show in the data bands, the start and end show no data. (As below) Now I'm sure the data band is set up correctly because if I add a vertex somewhere along the alignment, all the missing data shows up.
View 3 Replies View RelatedAutoCAD Civil 3D :: Pipe Invert Depth Band?
Jan 23, 2011I'm currently setting up a band set and want to include a band "pipe invert depth" i.e. basically trench depth.
There are properites in the band label style composer for "pipe invert level" and for "cover" and for "pipe diameter" but not pipe invert depth.Is there a way to display the pipe invert depth relative to the reference (design) surface/alignment?
A secondary question to this is can you use basic arithmetic in the band label style composer? eg pipe cover + pipe diameter?
AutoCAD Civil 3D :: Profile Band Vertical Geometry PI
Jan 16, 2013I did a grading, created surface with it and draw a profile view. Everything seems to be good, except with the vertical geometry band. I need to fix slope and length only at break point, means PI (blue line), but aligment has created more PI with each surface tringular line at intersection (us i note). Is there any why to specify PI only at a break points?
I can erase PI manually on static profile view mode, but i desire to do it in dynamic mode..., in case when conditions changes.
AutoCAD Civil 3D :: Get Finished Grade Elevation To Show In The Band At PVI?
Nov 28, 2012i've got a profile band for my finished grade profile. it works great except for where a pvi falls at a major or minor station, the profile band is blank. is there a way to get the finished grade elevation to show in the band at a pvi?
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
AutoCAD Civil 3D :: Band Style In Profiles - Staggering Labels?
Dec 12, 2013When I generate a band and the points that need to be labelled are very close to each other there is the possibility to stagger the labels (left, right, to both sides).
This works as I would expect it to.What I haven’t been able to determine is whether it is possible to adjust or influence the spacing between the staggered labels.
AutoCAD Civil 3D :: Profile Data Band Label Group?
Apr 7, 2012So I've got a collection of the LabelGroupSubEntity in the ProfileDataBandLabelGroup. I need to replace some values inside them based on what Vertical Geometry Point they are labeling. Is there an easy way to determine what station value it is labeling?
View 2 Replies View RelatedAutoCAD Civil 3D :: Profile Band Title Text Style
Jul 2, 2013Is there a way to make the Profile band title a specific text style? At the moment it seems that when I access
Profile Properties>Pick Band Style>Profile Data Bans Style>Compose Label>Label style composer
I go to the Contents (under Text) and edit it to bring up the Text component Editor.
In this if I go to the Format Tab the text style is set to annotative, however under that it says font style as an overide. How do I remove the override and set the style of the text to the text style. And how do i change the text style.
AutoCAD Civil 3D :: Missing Profile View Band Labels
Jan 20, 2010I cannot for the life of me get the start and end labels for any band to display within a profile view. Each band has the 'label start' and 'label end' labels ticked and the major/minor labels display at every other point but don't display anything at the start of the view or end. The profile views are taken from a simple straight alignment and the profiles themselves extend the full length of the view.
View 9 Replies View RelatedAutoCAD Civil 3D :: Profile Band Labels Keep Disappearing And Won't Plot
Aug 13, 2012I am running CV3D 2011 on a Windows 7 64 bit workstation. I have a road profile that has a band which labels the existing and proposed profile elevations. For some reason the profile band labels (including the stations) randomly disappear and all you see is the band box. If you REgen they will reappear but will dissapear again when you plot preview and they WON"T plot...even though they are there in the drawing!
Civil 3D 2013 SP2 | Win 7 64-bit SP1
Intel Core i5-2500 @ 3.30GHz, 8GB Ram | ATI Radeon HD 5450
AutoCAD Civil 3D :: Super-elevation Data Band Labeling?
May 9, 2012As shown in the attached drawing, the station label where the superelevation transitions back into normal crown shows with 4 decimal places. We have verified that all precisions are set to 0.01ft. The normal crown station at the begin transition shows with 2 decimal places.
Civil 3D 2013 SP1
Dell T3500 Workstation
Intel Xeon E5630 @ 2.53 GHz
12 Gig of RAM
Nvidia Quadro FX3800
Window 7 x 64bit OS
AutoCAD Civil 3D :: Profile Band - Spanning Pipe Labels
Mar 30, 2012I was looking at placing pipe information into a Profile Band. I see that I can include the following properties in a pipe label in the profile band:
<[Total Slope Across Span(FP|P2|RN|AP|GC|UN|Sn|OF)]>
<[Number of Pipes in Span(GC|UN|Sn)]>
<[Drop Across Span(Um|P2|RN|AP|GC|UN|Sn|OF)]>
Only problem is they don't actually give me the information of a spanning pipe, only a single pipe. I see no way of choosing which pipes will be spanned. Am i missing something in the creation of the profile band that allows me to choose the spanning pipes or is this broken?
AutoCAD Civil 3D :: Profile View Data Band Location
May 23, 2013i'm trying to get my data band flush with the bottom of my profile view. See attached screenshot.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
AutoCAD Civil 3D :: How To Add Super Elevation Detail On Profile Band
May 14, 2013How to add super elevation detail on Profile band.
View 1 Replies View RelatedAutoCAD Civil 3D :: Way To Export Band Data For Alignment With Two Profiles
Feb 5, 2008Is there a way to export the band data for an alignment with two profiles? I have an existing ground and a proposed profile. Can I export the station and elevation data from the band for both profiles?
View 9 Replies View RelatedAutoCAD Civil 3D :: Create Cross-section Band Style
Jul 11, 2012How would I go about creating a cross-section band style in C3D 2012 like the one attached?
View 6 Replies View RelatedAutoCAD Civil 3D :: Profile Line And Band Text Shift In Viewport
Sep 23, 2010We are using Civil 3D 2010, Version 4.1 and it is being used on both WinXP and Win7.
This is an issue that has been coming up at different times with profile views and them shifting when viewed from our viewports in our layout tab. It looks correct in the model space. But it shifts to the right 10' in the layout tab. We have 7 tabs in this drawing. I have looked through all of the profile view settings and it does not seem like any of these are the issue. I created a new viewport in the same tab and received the same shift to the right. I then created a new tab in the same drawing (not copied from the one that has the issue), created a new viewport, and the shift is not there. The PSLTSCALE, MSLTSCALE, and LTSCALE are all set to 1 in all of th tabs.
Woudl there be a layout tab setting that is causing this? This is happening on all of our machines with this drawing so I know it is not a specific user/machine issue. I have attached a .pdf showing the three cases described above if that were to provide any additional insight.