AutoCAD Civil 3D :: How To Make A Table From A Section Band
Jun 25, 2012How to make a table from a section band but from all the cross sections I have generated for a road.
View 4 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Cross Section Band
Mar 5, 2012I have a band label set up for my cross sections that will show existing grade and finish grade elevations at the 0' offset mark of each section.
However, the band does not show when I create my sections. The only way I can seem to get it to show is by right clicking a section, section view properties, bands tab, click 'import band set' at bottom of window, and select they style i want to use. But I have to do this for each section individually. That is a problem as I have over 200 sections for one piece of this project.
AutoCAD Civil 3D :: Section Data Band Properties
Nov 5, 2008I have an EG and FG data band for sections that works correctly. When i plot sections and it asks me specify surfaces 1 and 2, I choose my EG and FG surfaces appropriately. Then when the section displays the Section 1 and Section 2 are both set to the EG section of that specific sample line. If i change the section view properties manually it works but I'll have to do it individually for each section.
Also, is it necessary to create a FG surface from the corridor or can i get the data band to read from the corridor section itself?
AutoCAD Civil 3D :: Section View Band Label Not Appear
Jun 21, 2013Labels doesn't appear in all grade breaks and seems to have a relation regarding the side of the points!!!!
View 1 Replies View RelatedAutoCAD Civil 3D :: Create Cross-section Band Style
Jul 11, 2012How would I go about creating a cross-section band style in C3D 2012 like the one attached?
View 6 Replies View RelatedAutoCAD Civil 3D :: Section Band Style - Design Levels At Grade Breaks - No Triangles
Feb 26, 2012What I would like to achieve is a section band style for bulk earthworks and simple access roads that shows the design level at Grade Breaks only. The problem I am having is that Grade Breaks are being recognised as where the sample line crosses a triangle, not where the the grade actually changes/crosses a feature line.
A have a number of simple platforms, that I have created using an infill from feature lines, usually these platforms are surrounded entirely by feature lines of the same height. As to be expected, Civil 3d creates a few flat triangles, and as a consequence, all of the points where the sample line crosses these show up on my band style. Is there any way to achieve this band style?
AutoCAD Civil 3D :: Section View Table Plots In Different Location?
Dec 10, 2013All, I have created a drawing with cross sections. When I open the drawing the material table shows up below the section view instead of where I placed it. If I update the group the tables go back to where they should be. The problem is when I publish them using SSM the tables show up below the view , where they are when I open the drawing. It would be very time consuming to plot each sheet individually.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
AutoCAD Civil 3D :: Make Structure Table From DS
May 21, 2012Is it bad to make a structure table from a DS? I find I get missing data when I do.
View 2 Replies View RelatedAutoCAD Civil 3D :: Make Table From Lines And Text?
Jan 27, 2011I have a Civil 3D AECC table that I want to use in Excel but these entities can't be copied and pasted. I have exploded it a few time to get simple lines and text and want to convert these into an AutoCAD table for export to Excel.
I have searched forums and have found a few lisp routines (e.g. maketable.lsp at [URL]) but they don't work.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
AutoCAD Civil 3D :: Make Big Size Pipe With Irregular Section Shape?
Dec 9, 2013How could make big size pipe with irregular section shape by using Civil 3D?
View 5 Replies View RelatedAutoCAD Civil 3D :: How To Make Flared End Section Slope In Profile View
Jan 27, 2010How to make the flared end sections have the same slope as the pipes they are connected to in the profile view?
View 9 Replies View RelatedAutoCAD Civil 3D :: Make Big Size Pipe With Irregular Section Shape?
Dec 9, 2013How could make big size pipe with irregular section shape by using Civil 3D?
View 3 Replies View RelatedAutoCAD Civil 3D :: ProfileView Band Extents
Jul 1, 2012Is there an easy way to get the geometric extents of a profile view and bands? It appears that in Civil 3D 2013 .NET the Geometric Extents returns the extents of the profile excluding the bands. I don't like the prospects of either doing the math for all of the bands assigned to the profile view or exploding the profile view to get it and the bands as a block and getting the extents that way. [URL]....
View 1 Replies View RelatedAutoCAD Civil 3D :: Profile View / Band
May 22, 2013How to upload Civil 3d Sample profile with full band
View 1 Replies View RelatedAutoCAD Civil 3D :: Force Table And Table Text Height To Stay Constant Despite The Scale?
Feb 23, 2012Is there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
Photoshop :: Change White Band To Red And Red Band To Blue?
Oct 15, 2011i'need to change white band to red and red band to blue in this imsge:
second band is quite easy, first is impossible
AutoCAD Civil 3D :: Profile Band Elevation Precision?
Jun 20, 2008In the profile band the elevations are set to 3 decimal places. I just want to get it to 2 places.
View 3 Replies View RelatedAutoCAD Civil 3D :: Hiding Profile Elevations In The Band
Mar 21, 2012Attached is a drawing with my profile along with elevations in the band.
UPPER BAND - has proposed road elevations on the left and existing road elevations on the right.
LOWER BAND - has pipe elevations on the left and the SAME existing road elevations on the right.
I've been messing around in the profile view properties but cannot hide the duplicate elevations in one of the bands.
AutoCAD Civil 3D :: Profile Band Style Setting?
Aug 26, 2013In the Band Style_A pdf you can see the location of my elevation labels, they are below the bottom line of my profile view grid. In the Band Style_B pdf the labels are showing up in the proper location (above the bottom line of the profile view grid). To move the labels to the proper location I changed the "Gap" setting from 12.5 to -24. Is there a way to change this setting in my "style" rather than have to go make this change to the style every time I use it in a profile?
View 3 Replies View RelatedAutoCAD Civil 3D :: Pipe Gradient Band Style
Oct 29, 2013I'm trying to create a profile view band style to display a gradient as a fraction i.e 1/100 rather than a % I've tried creating an expression to do this ( see below) the sum works but I don't get a solution/answer just the sum displayed on the band.Basically the sum is length/change in elevation
for clarification / = divide
Expression
(<[Pipe Start Chainage(Um|FD|P3|RN|AP|GC|UN|Sn|OF)]> - <[Pipe End Chainage(Um|FD|P3|RN|AP|GC|UN|Sn|OF)]>) / (<[Start Invert Level(Um|P2|RN|AP|GC|UN|Sn|OF)]> - <[End Invert Level(Um|P2|RN|AP|GC|UN|Sn|OF)]>)
AutoCAD Civil 3D :: Data Band At Wrong Station
Jun 13, 2013A coworker who is no longer with us set up the data band styles & settings in our template, and they were working fine in 2011. Then, on a new job in 2011, I encountered this problem. I gave up.
Now I'm working in 2013. The template was brought forwards, so it's the same settings, and I'm hitting the same problem as before. The difference is this time I'm working on a really long profile, and I really really want the bands to work.
Here's the problem.
The ones I checked in blue are not part of the data band. They are profile view labels, and they show the correct stations.
The ones circled in red are the data band. As you can see I need to work on my gap settings, but that's not my problem. The problem is the location of these labels. There is indeed a PVI at station 1+165, but the label is 40m away from that station! I don't know where to start digging to find the setting to tell that label to move 40m to the right, and tell 1+135.86 to move 20m to the right.
AutoCAD Civil 3D :: Profile View Band Labels
Apr 4, 2012Is there a way to get the ProfileBandLabelGroup labels from a profile view. I see I can get the ProfileViewBandItems, but don't see a way to convert it into the labels. I'm looking to override the text components. The code below does that, it's just getting the object without having to have the user select it.
ProfileBandLabelGroup labels = ssResult.ObjectId.GetObject(OpenMode.ForWrite) as ProfileBandLabelGroup;
LabelStyleTextComponent textComponent = labels.GetAt(0).GetTextComponentIds()[0].GetObject(OpenMode.ForRead) as LabelStyleTextComponent;
Autodesk.Civil.DatabaseServices.LabelGroupSubEntity label = labels.GetAt(0);
label.SetTextComponentOverride(textComponent.ObjectId, "blue");
AutoCAD Civil 3D :: Missing Band Data At Endpoints
May 27, 2013I've been working with Civil 3D for a while and I've gotten the Profile View and Data Bands down.Whenever we create an alignment with only two vertices (at each endpoint) and make the Northings, Eastings, and Elevations show in the data bands, the start and end show no data. (As below) Now I'm sure the data band is set up correctly because if I add a vertex somewhere along the alignment, all the missing data shows up.
View 3 Replies View RelatedAutoCAD Civil 3D :: Develop Custom Band For ProfileView
Feb 26, 2012I need to develop a custom looking band for Profile View. Is it possible with .Net? Where can I find any info about how to do it?
View 1 Replies View RelatedAutoCAD Civil 3D :: Pipe Invert Depth Band?
Jan 23, 2011I'm currently setting up a band set and want to include a band "pipe invert depth" i.e. basically trench depth.
There are properites in the band label style composer for "pipe invert level" and for "cover" and for "pipe diameter" but not pipe invert depth.Is there a way to display the pipe invert depth relative to the reference (design) surface/alignment?
A secondary question to this is can you use basic arithmetic in the band label style composer? eg pipe cover + pipe diameter?
AutoCAD Civil 3D :: Profile Band Vertical Geometry PI
Jan 16, 2013I did a grading, created surface with it and draw a profile view. Everything seems to be good, except with the vertical geometry band. I need to fix slope and length only at break point, means PI (blue line), but aligment has created more PI with each surface tringular line at intersection (us i note). Is there any why to specify PI only at a break points?
I can erase PI manually on static profile view mode, but i desire to do it in dynamic mode..., in case when conditions changes.
AutoCAD Civil 3D :: Pipe Section In Full Height In Section Views?
Feb 20, 2013I have lots of section views with some surfaces and pipes. Unfortunately, in a number of section views pipes are not shown in full height because the section view level range is too little. What I am wondering is - is it possible to automatically adjust section level ranges so that they fully include pipe sections? Please see also the image in the attachment.
View 2 Replies View RelatedAutoCAD Civil 3D :: Alignment Style - Section - Line Marker In Section
Mar 26, 2012C3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
AutoCAD Civil 3D :: Creating Section Sheets From Multiple Section Views
May 21, 2012When i am creating section sheets from multiple section views ,section sheet view port scale changes.I did set it correctly in my template.
For example it changs from 1:150 to 1:150_1
Then in section sheets scetions views are not displaying correctly.
When i change view port scale manually it shows correctly.But it should do to all sheets.
What should I do?
In model spacr multiple section views are showing correctly.
AutoCAD Civil 3D 2012 SP 2
Sri Lanka
AutoCAD Civil 3D :: Adding Cross Section To Section View Group?
Jul 17, 2013Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
AutoCAD Civil 3D :: Table To Table Link On Different Layouts
Feb 18, 2013I want to know if you can link AutoCad tables to other Autocad tables on different layouts. Say I have ten sheets, each with a table for quantities of pipe length, and one sheet with a total of all quantities. Can I link cells from each separate layout sheet to the main table sheet, so that I can add them all for project totals?
View 3 Replies View Related
