AutoCAD Civil 3D :: Create Cross-section Band Style
Jul 11, 2012How would I go about creating a cross-section band style in C3D 2012 like the one attached?
View 6 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Cross Section Band
Mar 5, 2012I have a band label set up for my cross sections that will show existing grade and finish grade elevations at the 0' offset mark of each section.
However, the band does not show when I create my sections. The only way I can seem to get it to show is by right clicking a section, section view properties, bands tab, click 'import band set' at bottom of window, and select they style i want to use. But I have to do this for each section individually. That is a problem as I have over 200 sections for one piece of this project.
AutoCAD Civil 3D :: Section Band Style - Design Levels At Grade Breaks - No Triangles
Feb 26, 2012What I would like to achieve is a section band style for bulk earthworks and simple access roads that shows the design level at Grade Breaks only. The problem I am having is that Grade Breaks are being recognised as where the sample line crosses a triangle, not where the the grade actually changes/crosses a feature line.
A have a number of simple platforms, that I have created using an infill from feature lines, usually these platforms are surrounded entirely by feature lines of the same height. As to be expected, Civil 3d creates a few flat triangles, and as a consequence, all of the points where the sample line crosses these show up on my band style. Is there any way to achieve this band style?
AutoCAD Civil 3D :: How To Create Some Cross Section Reports
Oct 8, 2012I am trying to create some cross section reports. But I have noticed that none of the options available (Section Point Report, or any of the ones that use Sample Lines) will show any featureline information if it is not part of the region which is attached to the alignment chosen in the report.
For instance, I prefer to create my splitter islands as a seperate baseline (levels taken from a dummy surface) and add a simple kerb assembly to this. (So both are in the same corridor). My normal visual cross sections show the splitter island kerbs without issue. But the cross section reports do not.
I have a similar problem with some of the footways, which are created on a separate baseline. (I am working on car parks, where the footway surrounds the car park. So it is easier to create the footways seperately). The section reports do not pick up the footways, presumably because it belongs to a different baseline.......
I dont understand why a section report cant simply pick up any featureline it crosses??
Intel Xeon E31230 - 3.20 GHz
4.00 GB RAM
Windows 7 Professional - 64-bit
Nvidia Quadro 600 - 1GB DDR3
AutoCAD Civil 3D :: Create Existing Cross Section?
Aug 4, 2012I try to create existing road cross section in civil3d only with offset and elevation.
View 4 Replies View RelatedAutoCAD Civil 3D :: How To Create A Well-detailed Cross Section Of An Alignment
Feb 4, 2013I have been using the "Create Surface Profile" to create cross sections of a road at various points using separate alignments (at the various points). I was wondering if there was a more sophisticated way to do this? When comparing my work to other plans it seems that this method is juvenile.
View 3 Replies View RelatedAutoCAD Civil 3D :: Adding Cross Section To Section View Group?
Jul 17, 2013Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
AutoCAD Civil 3D :: Section Data Band Properties
Nov 5, 2008I have an EG and FG data band for sections that works correctly. When i plot sections and it asks me specify surfaces 1 and 2, I choose my EG and FG surfaces appropriately. Then when the section displays the Section 1 and Section 2 are both set to the EG section of that specific sample line. If i change the section view properties manually it works but I'll have to do it individually for each section.
Also, is it necessary to create a FG surface from the corridor or can i get the data band to read from the corridor section itself?
AutoCAD Civil 3D :: Section View Band Label Not Appear
Jun 21, 2013Labels doesn't appear in all grade breaks and seems to have a relation regarding the side of the points!!!!
View 1 Replies View RelatedAutoCAD Civil 3D :: How To Make A Table From A Section Band
Jun 25, 2012How to make a table from a section band but from all the cross sections I have generated for a road.
View 4 Replies View RelatedAutoCAD Civil 3D :: Profile Band Style Setting?
Aug 26, 2013In the Band Style_A pdf you can see the location of my elevation labels, they are below the bottom line of my profile view grid. In the Band Style_B pdf the labels are showing up in the proper location (above the bottom line of the profile view grid). To move the labels to the proper location I changed the "Gap" setting from 12.5 to -24. Is there a way to change this setting in my "style" rather than have to go make this change to the style every time I use it in a profile?
View 3 Replies View RelatedAutoCAD Civil 3D :: Pipe Gradient Band Style
Oct 29, 2013I'm trying to create a profile view band style to display a gradient as a fraction i.e 1/100 rather than a % I've tried creating an expression to do this ( see below) the sum works but I don't get a solution/answer just the sum displayed on the band.Basically the sum is length/change in elevation
for clarification / = divide
Expression
(<[Pipe Start Chainage(Um|FD|P3|RN|AP|GC|UN|Sn|OF)]> - <[Pipe End Chainage(Um|FD|P3|RN|AP|GC|UN|Sn|OF)]>) / (<[Start Invert Level(Um|P2|RN|AP|GC|UN|Sn|OF)]> - <[End Invert Level(Um|P2|RN|AP|GC|UN|Sn|OF)]>)
AutoCAD Civil 3D :: Band Style In Profiles - Staggering Labels?
Dec 12, 2013When I generate a band and the points that need to be labelled are very close to each other there is the possibility to stagger the labels (left, right, to both sides).
This works as I would expect it to.What I haven’t been able to determine is whether it is possible to adjust or influence the spacing between the staggered labels.
AutoCAD Civil 3D :: Profile Band Title Text Style
Jul 2, 2013Is there a way to make the Profile band title a specific text style? At the moment it seems that when I access
Profile Properties>Pick Band Style>Profile Data Bans Style>Compose Label>Label style composer
I go to the Contents (under Text) and edit it to bring up the Text component Editor.
In this if I go to the Format Tab the text style is set to annotative, however under that it says font style as an overide. How do I remove the override and set the style of the text to the text style. And how do i change the text style.
AutoCAD Civil 3D :: Extract Boundaries From 2D Solid Level Band Surface Style
Jun 20, 2012I'm using 2D solid level band surface styles when generating simple flood maps - In order to manipulate I generally have to extract the surface objects (faces or hatches) which gives me a single face or object per triangle within the surface.
I then try and get round this by using a combination of various Lisps and Union to wind up with a single boundary that I can then use in ordinary AutoCAD and 3rd party software. However on big surfaces this is killing me as I have 50k+ triangles, so 50k+ faces or individual hatches, so its causing 15min long unresponsive stalls on my PC.
What I'd like to do is simply export the boundary of each level band to a polyline, or even better to extract the whole solid band as a single hatch object. Is this possible within C3D as it stands, or is there a lsp out there
AutoCAD Civil 3D :: Band Style To Display Surface Elevation - Horizontal PVI Points
Oct 8, 2013C3D 2012 SP3 on Win 7 Pro:
I have an alignment with horizontal PVI points that are coincidental with COGO points. I want to display in a profile view, a surface elevation at the alignment PVI points in a band style. Is it possible to do this? If so, how?
AutoCAD Civil 3D :: Alignment Style - Section - Line Marker In Section
Mar 26, 2012C3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
AutoCAD Civil 3D :: Cross Section Projection
May 12, 2012if i have one feature line i want to project to all sections in a sample line group it would seem you should be able to pick the one line and assign in a label style and you would be done quick and easy. instead if you pick the multiple projection option you get this percentage distance box and it tend to grab stuff you don't want.
View 2 Replies View RelatedAutoCAD Civil 3D :: 2D Area Of Cross Section?
Feb 15, 2013I have a cross section view with a canal section and a flat water surface section.
Is there a way for C3D to calculate the 2D area of the canal section that is under the water elevation?
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
AutoCAD Civil 3D :: SSA - Cross Section Import?
Jan 21, 2011I'm just starting to get involved with using SSA, and I'm wondering if it's possible to import sample lines/alignments (a la Hec-Ras). I see that there's an irregular channel editor, but no import options that I can see. I'll end up with about a dozen or so x-sections.
View 3 Replies View RelatedAutoCAD Civil 3D :: Cross Section Direction
Nov 14, 2013I'm currently working on a cross section plan and was wondering if there was any way I can change the direction of the cross section view. I'm currently just using 2 sample lines, so just 2 views are needed. My problem is that it seems like one cross section...the view is facing upstream and the other sample line, the cross section view is facing downstream.
Is this normal? How come both cross sections don't face the same direction? So with one x section it's in a East-West direction but the other is a West to East direction.
HP Compaq 8100 Elite
Win 7 Pro SP1 - 64Bit
8GB RAM
i7 860 @ 2.80 GHZ
AutoCad Civil 3d 2012 SP1
AutoCAD Civil 3D :: Cross Section Display
Feb 8, 2012I am working with cross sections for the first time and have run into a few things I can't seem to figure out. In attachment XSEC CIVIL 3D.pdf you will see how the cross sections currently look in my drawing.
My questions:
1. I cant seem to edit the elevation labels on the right side of the section to match the left side. Where/how can I do this?
2. What is the red line? In some sections it exactly follows the assembly section, but in a few (like this one) it doesn't quite follow. Does this line show where manual editing was done?
3. Where the pavement ends, there is a vertical line which I only want to show on the two pavement layers, it shows all the way thru the assembly. This also happens at the centerline of the assembly and at the edge of shoulder. I figured out how to turn them all off, but I want the edge of pavement vertical lines there.
4. Although the assembly section comes in on color 161 which should plot black for my pen setting, it plots true color. I haven't been able to figure out how to switch this. The second attachment shows a section from a LDD project a few years back which is how I would like this section to plot.
AutoCAD Civil 3D :: Existing E/P In Cross Section
Jul 25, 2012I'm new to cross section in C3D.I'd like to be able to see my existing e/p lines i toped in the cross sections.
View 3 Replies View RelatedAutoCAD Civil 3D :: How To Crate Customize Cross Section
Jul 28, 2013how to crate Cross section like that below. i can crate data band consten elevetion and offsets. Question is how to crate grid and data like that.
View 5 Replies View RelatedAutoCAD Civil 3D :: Cross Section With Sample Lines
Jan 13, 2013I have my surface, aligment and sample lines created, but I cant get my sample lines profiles.
The grid apperas without data, it is like I have never selected a surface, but I did !
This is what I get , totally empty
AutoCAD Civil 3D :: Automatic Cross Section Labels
Dec 9, 2013create a label style for cross sections that will label the travel way in the run:rise format and will label fore and back slopes in a percent format. I can figure out how to make them all one or the other, but am having trouble getting them to reflect correctly based on where they are attached.I am having trouble coming up with the actual expression or you can do it thru code set styles, but regardless of settings that I change nothing on the cross section view changes.
View 3 Replies View RelatedAutoCAD Civil 3D :: Project Right Of Way Line Into Cross Section
Jun 26, 2013How can I project a right of way line into a cross section.
View 1 Replies View RelatedAutoCAD Civil 3D :: Cross Section Elevation Labels
Mar 21, 2012Attached is a pdf showing the issue I'm having with the way elevations labels appear on the outside edges of cross sections.
Issue #1:
I added the dimension to show that the bottom of the cross section is actually at 97.5 but is labeled as 98
Issue #2:
I would prefer the bottom of the cross section to be at an even elevation (98 not 97.5)
AutoCAD Civil 3D :: Cross Section Volume Display?
Jul 26, 2013I have been asked to place volumes on cross sections with a certain look, that I am not sure if it is possible. For know I am just going to use text, but I would like to come up with a solution for our template and work flow. Below is an attached copy of a markup I have received asking me to show this information on the cross section similar to how he has written it. At this point I only know how to create the tables of to the side. Is it possible to dynamically show this information quickly like shown below? I have a feeling the engineers I work with will not be happy at all with a table off to the side. I am currently using 2013
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
AutoCAD Civil 3D :: Multiple Cross Section Labels?
Jan 31, 2013Using 2011 - Having trouble with cross section labeling. I have multiple label markers such as ROW, and multiple EASEMENT types. I've created corridors for each label type - each will show up if their corridor has a corridor section line at the same station as the base corridor, but at odd ball stations (like driveway openings) the labels do not show up, I'm thinking its because I don't have these corridor section lines in each corridor. Is there an easier work around rather than manually adding the section lines in each corridor?
View 3 Replies View RelatedAutoCAD Civil 3D :: Cross Section Ground Labels
Aug 9, 2013How can the cross sections be setup to label the existing and proposed grade at the centerline of a cross section, see attached. Could do this in LD but have not been able to figure it out in Civil 3D
C3D 2013 (latest updates), 2014 Infrastructure Design Suite
Win 7 Pro, 64-bit
16 GB RAM