I have a drawing from a contractor that is dimensioned in metric units. I have been tasked with converting the displayed units to inches for our machine shop. I have tried to display alternate units but they don't appear, yes, I did check the "display alternate units" box. I am using AutoCAD 2013.
View 9 RepliesWe are having an issue with Dimensioning and the Primary Units not maintaining the correct value. We use metric so the multiplier of 25.4 or .039370079 for Dim Scale Linear would be used in our Dimension Styles depending on if we are drawing in model space or annotating in paper space. We have created specific Dim Styles for Model and Paper space. Every so often some of us will us the Dim Style for paper space and a metric unit would be shown. When we go into the properties of that dimension and change the Dim Scale Linear to 1 it shows as a different dimension then it actually is. After looking at the correct dimenion, we noticed the Dim Scale Linear shows .9449 but gives the correct dimension.
Note: We are drawing in Metric a multiplier of 25.4, our dimensions are done in english. A scale factor of .039370079 is used to accomplish this.
There is a simple fix with Match Properties but it still doesn't answer why our dimension show up wrong with a different multiplier for Dim Scale Linear.
Is it possible to obtain Architectural unit dimensioning (ft and inches) in a metric drawing ?
View 3 Replies View RelatedI received a .dwg file from S. Korea with dimensions and units all in the metric mm and I need the units to be in feet and inches. Is there a command to switch dimensions and units to imperial feet and inches?
Rather than changing units in command UNITS Inches and Architectural, and SCALE 25.4, is there any other way to switch metric to imperial systems. Scaling somewhat does the trick but, provided dimensions remain in mm.
I have one problem in ilogic "How to convert the normal dimension to driven dimension through ilogic"
View 4 Replies View RelatedI have a venue drawing that is in mm and I need to convert it to ft/inch so I can update and get dimensions from it. Can this be done so when I change the format in drawing units it will update the drawing units?
Current settings.
Drawing units
Length:
Type - Decimal
Percisin - 0
Angle:
Type - Decimal Degrees
Precision - 0
Insertion Scale:
Unitless
I have a problem with my autocad. The administrator started me out on AutoCAD 2012 global.
The problem existed then so. Now he has me on AutoCAD 2012 Imperial . The problem still exists.
When I open an existing drawing that I have never opened with my version of Autocad. It opens the drawing in Metric units. I do not want Metric units. I would like it in Imperial units. Every time I open an existing drawing, I have to change the units to Architectural.
If I type the command UNITS and change the insertion scale to millimeter (mine was inches), what is going to happen? At first i used inches to draw 5 inches line and the get the dimension of it, second i drew again a line using the millimeter in units, but when i measured it still it is exact to the first line that i draw.
View 9 Replies View RelatedI'm having an issue with dimensions changing from when I save the drawing to when I reopen it.
I'm using AutoCAD Mechanical 2009, exclusively in 2D. I save drawings in AutoCAD 2000/LT 2000 Drawing format to maintain backwards compatibility with our legacy documents which are still in regular use.
The exact process is:
1. Create dimension in existing drawing.
2. Set units of dimension. Typically this is fractional.
3. Save and close drawing.
4. Reopen drawing, and all of the dimensions units are set to decimal to the fourth decimal point.
If I interact with the dimension in any way, it will return to its set unit. For example, if I double click on it to bring up the Power Dimensioning window and just click Okay without altering anything, it will change back to its set unit. Likewise, if I move the dimension itself it will return to its set unit as well.
So far my solution has been to simply select the entire drawing at once, then move it X units one way, then X units back. The move back and forth will return all the dimensions to their set units.
Obviously this is not ideal, especially when sending drawings to co-workers who are unaware of the issue or even using different versions of AutoCAD.
is there any way I can place dimension on drawing that would be in dual units (in decimal degrees and in deg min sec)?
I did not find this possible so far.
I was able to convert the pdf to a dwg but the units are off. I know that some things need to be redone, but I was wondering if this drawing can be made accurate. For example, the top line is supposed to be 30.500 m but in the converted file it only comes out to .11 m
Mid level.dwg
This is the original pdf with the units being in meters. a2.2 100223.pdf
I don't know if this has been reported but I found out today when working on a web design (hence working in the new unit - pixels) that you can't actually use the Dimension tools for measuring pixels. That's a pity because often you need to work with exact pixel dimensions when making websites and here the Dimension tools could come in very handy. It seems counting pixels by hand is a bit old-fashioned. Of course you can use calculations, but still...
View 5 Replies View RelatedI have a part.I use some Parameters of this part as linked to other parts.Once I change any parameter used as linked the other parts will follow it automatically.So I have drive and driven parts.
Now for some reason I need to change some geometry in my drive part in the way my drive dimension must be reattached to other geometry points.
I cannot delete and create the new dimension even with the same name since all my driven parts will lose this linked parameter in either way and this parameter becomes static (Reference Parameter).
I wish I can preserve the existing dimension (parameter) and reattach it to other geometry.
I'm chasing the syntax on what i hope is a very simple procedure.
We have a project for re-design and manufacture here (Australia) of a machine that has been designed and detailed in one of our US offices. For this reason, we will be wanting all dimensions in mm etc, rather than inch.
My intention is to open the idw(s), update the styles library (done, i think...), change the active standard to "AS Metric" (got the code sorted for that too), and then change all dimensions to AS Metric.
So far i have each of these 3 processes in a different sub, called from a master. But my problem is in changing the style. I could change a dimension's style to match that of another existing style:
Set oGeneralDimensions = oSheet.DrawingDimensions.GeneralDimensions.Item(1)
but I am having trouble setting is to the active style.
My module:
Sub ChangeStyle()
Dim oIDWDoc As DrawingDocument
Set oIDWDoc = ThisApplication.ActiveDocument
Dim oSheet As Sheet
Dim oDim As DrawingDimension
Dim oDimStyle As DrawingStandardStyle
Dim oGeneralDimensions As GeneralDimension
[Code]....
i have massive problems converting a scene which is actually in M system units, and that i want to convert to MM as system units.
What would be the correct workflow ? (i tried the rescale world units but that didn't work that well, and just scale up 1000x neither)
I have a problem with Dimension association to any existing object in my drawings. If i draw anything new in the same drawing this problem does not occur. The leaders are also associating themselevs to these objects.
When i select a line, no grips appear even though if i draw a new line they do.
-I have tried to use DIMDISASSOCIATE the dimensions from the objsect to no avail.
-I have tried changing the DIMASSOC variable but this didnt work.
-I have tried exporting the objects to new files but still the same problem, only with the objects from this drawing.
It seems to have made every object associative. The only thing i can think that caused this was i pasted in a drawing from a pre 2002 Autocad version.
Why the heck does Inventor arbitrarily orient sketches as it sees fit? I often create my first sketch on the right (YZ) plane and Inventor, stupidly turns the sketch where "RIGHT" in the viewcube reads from top to bottom.
I know all the things to do to AFTER this happens, but it shouldn't happen in the first place. If I turn my sketch so that up is up, like it should be, I then have to remember that vertical is horizontal, which is now vertical. I can't change the sketch coordinate system. It's the first sketch and there is nothing to align it to.
How to prevent the above example from occurring in the first place.
This, and the fact that I can't dimension to any existing vertices or edges without projecting them first, really make me hate using Inventor sometimes. To me, these are huge problems, neither of which Solidworks has. At worst, both of these behaviors should be configurable.
How to convert the “existing” hatch from one measurement to another?
In the screenshot below, the first hatch is drawn with “measurement” = 1 (metric), while the second is drawn when the measurement = 0 (imperial). The “measurement” value is not a property for the hatch!
Then how to convert the hatch that already exist and drawn with the “measurement” = 0 to the “measurement” = 1.
In other words, how to switch all the hatches in a particular plan from being “imperial” based (measurement = 0) to “metric” (measurement = 1)?
Is there a way to do that? Or should we delete the existing hatches and re-draw them with the required setting (metric/imperial)?
Difference between the two windows UNITS and STARTUP What is the unit to adjust?
For example, the If I UNITS I set the units to meters What is the difference with the STARTUP Set the meter to be.
Using AutoCAD 2013, I have set my the placement of the alternate units to "Below primary value" (in Dimension Style), but they do not go underneath, they remain after the primary units. I tested in 2012, and it works fine there but not in 2013.
View 3 Replies View RelatedI have just installed my autocad 2013 software. I've set the units to millimeters. But the workspace is still in inches. Even the dimentions are coming in inches. How to set the unit in millimeters?
View 1 Replies View RelatedAfter installation of the AutoCAD 14 and setting up drawing parameters to support the .dwt template, from the Format menu, tried initiating the units, points, table style, and layer states command but get a prompt for indicating for example: "units" unknown command, "DDTYPE" unknown comand, etc.. What setting do I have to adjust in order for these commands to work?
View 4 Replies View Relatedwhen I use the units command I do not get the dialog box.
View 7 Replies View RelatedUnits of objects from the tools palettes, I’m wondering in which unit does the objects of the tool palettes are inserted. For example, as my drawing unit is meter, I need them to be inserted in meter to fit well with my drawing.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I cannot for the life of me figure out how to do the following:
set my units to inches so I can enter dimensions in inches and see them displayed in inches.
We need to xref a drawing with a different unit. When I go into the drawing file I want to xref and use the "-DWGUNITS" command I change it from feet to inches and use Architectural. Answer yes to all questions and certain objects disappear. Most of the objects are pline or spline objects. Here is what I see in the AutoCAD Text Window:
Scaling failed for: <AcDbZombieEntity FD3C>
Scaling failed for: <AcDbZombieEntity FD3E>
Scaling failed for: <AcDbZombieEntity FD3F>
Scaling failed for: <AcDbZombieEntity FD41>
Scaling failed for: <AcDbZombieEntity FD42>
Scaling failed for: <AcDbZombieEntity FD44>
Scaling failed for: <AcDbZombieEntity FD45>
Scaling failed for: <AcDbZombieEntity FD47>
Scaling failed for: <AcDbZombieEntity 1956F>
Scaling failed for: <AcDbZombieEntity 19570>
There a lot more of scaling failed messages. too many to show. How can I xref in these drawings with different units without objects disappearing?
I have just upgraded from AutoCAD 2008 to 2013 so I'm unfamiliar with the latest set up & dont' have time to explore it properly yet. I see that 2013 has a different projection method for paper space views but for the present I am still using solview & soldraw which I am familiar with to get my work done on time.
In 2008 the 'Linetype manager' page let you tick a box 'Use paper space units for scaling' so that different paper space view ports would automatically scale line types to suit the viewport scale. To draw details of parts of a view I would normally copy the basic solview view port, alter its property to a layer named VPORT, scale this viewport to the desired scale to show what I want to detail & the linetypes would automatically scale so that they appear the same as in the original solview view port.
This pick box is not in the linetype manager page in 2013, how can I achieve this?
I have MSLTSCALE >0, LTSCALE>0.5 & PSLTSCALE >1
I've noticed an anomoly when working with XREF's and changing units. With the company that I work, we receive client drawings, XREF them in, and put our drawings on top of them. For this particular project, we have about 150 drawings that we are working with. The biggest problem is the drawings we receive are in various units, and we draw in millimeters. So when we go to XATTACH, we have to make sure the XREF drawing's units are set to mm, although most of them are not. So we navigate to the XREF drawing, open it, open the UNITS window, change it to millimeters, accept, save, and close the drawing. However, when we go back into the actual drawing to XATTACH again, the unit change in the XREF has not taken effect. Reopening the drawing and launching UNITS will show that, indeed, the unit change was not saved. Doing it a second time will take effect, but why do we have to do this dance in the first place?
This problem occurs about 50% of the time. I can't seem to find a pattern with it. If I make a change to the XREF drawing itself as well as changing the units (like moving the pan or zoom), but to no avail.
Windows 7 Pro SP1
AutoCAD LT 2013 Version: G.55.0.0
change my existing customize classic toolbar to be ribbon type.. Though want to try out the ribbon type format with my current customize toolbar.
View 1 Replies View Relatedi have one assembly file. it was done in japanese Language. i need to change in english.
View 2 Replies View RelatedOur office created a library of blocks for use in our dwgs in the early days of Autocad. Since installing MEP2013 when inserting the blocks many of them have mysteriously changed from inches to millimeter units. We have to go back to each block(dwg) and change the units and rescale the blocks. We upgraded from MEP2012 and they were working fine.
View 4 Replies View Related