I have just installed my autocad 2013 software. I've set the units to millimeters. But the workspace is still in inches. Even the dimentions are coming in inches. How to set the unit in millimeters?
View 1 RepliesI cannot for the life of me figure out how to do the following:
set my units to inches so I can enter dimensions in inches and see them displayed in inches.
Best practices for setting up systems in a lab environment. We have a lab enviroment of about 200 systems that access AutoCad, Inventor, Mechanical and others.
We need to have a customized interface come up when Autocad is opened by students.I have read that you can do this with profiles and workspaces and also with loading a acad.lsp file.
In the past we have just copied the Windows admin profile used to customize AutoCad to the default profile. In AutoCad 2013 that does not seem to grab everything. It doesn't seem to be the best way to do what we need.
We will also be moving to Windows 7 soon which will also cause an issue.I want to find the best way to do this with out having to deal with the Windows profile.
how to change default units to metric for inventor2013? Now I have them set as imperial.
View 3 Replies View RelatedI have 2 staff members who both have recently had problems with their custom settings from OPTIONS revert to the default settings every time they close out of AutoCad. One is using AutoCAD 2013 on W7 & the other is using AutoCAD 2014 on W8.1.
They have to reset their display, units, osnaps, etc regularly. I suggested creating a profile they can use until we resolve the problem,
We just switched to AutoCAD 2013 and we are trying to figure out the best way to make a note with a leader. So far it seems the best thing to use is the keynote option called TEXT WITH STRAIGHT LEADER. If we just do text, no leader is automatically added. This seems to work except we cannot set the text to a default of arial.
Once the text is entered, it changes to ArchDim instead of the text we created called 'Arial'.
I'm the REVIT person in the office so I'm trying to figure out CAD as I go...hence I need easy instructions that I can try to navigate...
Is there a way to change the default setting for the Array path command?
When I use the arraypath command I:
1st - Select Object
2nd - Select path curve
3rd - Type in "I" for Item to change to my desire spacing.
What is the correct procedure to set up units in a project. I want to work with meters, ant the metric template is in milimeters. if I change the mm in m, when I make views the callouts are displayed incorrectly.
View 1 Replies View RelatedWhat system variable changes the Drawing Units Precision?
View 5 Replies View RelatedOur school rercently updated to Inventor 2014, When working starting a new assembly we seslect the standard mm ipt icon, however as soon as you create a new compont it defaults to inches, we can change the units using styles editor, but this only changes this componont when you create another part it also defaults to inches.
Can you change the setup so that it will always be in mm.
I am working on AutoCAD 2014 and every time I receive and open a new file from our collaborators in Italy, the file units "turn into" inches.
This means that I have to go to Drawing Utilities, Change the units to cm, and then have to Scale everything so that the measurements make sense again.
I've gone into OPTIONS and have set CM as thed default measurements, but this problem persists. I know that the office in Italy can't possibly be working in inches, so I'm assuming there's something that's "lost in translation" when it comes to opening the file on my end.
I have a query on the units for Autocad, every time i start Autocad up it defaults to inches, i have to change the units manually to mm using in units. is there a way to set this that i don't have to keep doing this?
View 2 Replies View Relatedhow to open AUtoCAD 2012 so the default units are set to imperial? I only have one autocad icon (as opposed to a metric and imperial icon which I have seen before).
View 3 Replies View RelatedI'm having trouble with getting my polygons to be the same sizes. My units are set to inches but for some reason when I build a cylinder it is way larger than the scale of a cube, even though the x,y,z inputs are identical.
The cube's measurements are: x 10 y 108 z 10, as are the cylinder. As you can see the cylinder is much larger.
Just wondering what the best way is to set-up my units and scale preferences in 3dsmax. I would like to have my units in mm or cm so that when I import an object with known and precise measurements, it will stay consistent in 3ds max. So that I can visualize the objects in the correct scale and make measurements with the right numbers.
Of course I dont want to mess with results ofmy textures, animation, camera and anything else in 3ds max and would want to have everything behave normally if my units were in cm or mm in stead of the default.
Win7 Pro 64bit
I7 3680 6 core 12MB cache w Corsair H80 liquid cooling
ASUS P9X79
32 GB DDR3
NVidia Quadro 5000
3TB WD
how to adjust the default settings of my drawing units. I have adjusted these so that if I create a new drawing they are set as I want them. But when I output a drawing from
I work with a land surveying package. I use both AutoCAD 2006 and R14. When I export a cad dwg from the survey software and open it in R14 my drawing units are as I want them E.G Direction Control = North = 270 and should be set to clockwise. If I open the same exported drawing but in 2006 the settings change. If I create a new drawing in 2006, the settings are as I want them.
Where is the configuration for the Default Template Measurement units stored? Have tried creating an application options file, but on the clients this setting is not read/stored (still set to inches after import).
Is this setting stored in the registry? Where?
...and why does Inventor default to a non metric measurement unit?
Everythime when starting a new project I first go to 'Options' > 'Units' > 'Page units' and set it from 'Inch' to 'Pixels' is there a way to set this as default ?
Note: I'm currently using the old free version Xtreme 5 Silver because lost the paid version after a system format and register code that didn't work anymore, perhaps of newer version there an easy setting for that, on this one I haven't found it yet.
why it seems that Revit ignores the Project Units setting in the template file when opening an IFC file? Even when the template is targeted in the IFC open dialogue?
The IFC was exported from ACA 2008 with the Imperial units set.After opening the IFC file in Revit 2012, the project is set for Metric, even though the referenced template (.rte) is set up with Imperial.
Is there a way to change the default arc type in AutoCAD 2011? Currently, the ARC command defaults to "Start, End, Radius". I would like it to default to a 3-point arc.
View 9 Replies View RelatedHow to change the default QLeader setting to match my personal preference, which is shown in my attachment?
View 9 Replies View RelatedAIA standard seems to have layer '0' as a default setting. What is the line weight assigned to this layer?
View 1 Replies View RelatedIs there anyway to create a default setting so that units stay in pixels. Each time I bring in a new image in Photo-Paint X6, I have to reset units back to pixels by clicking Tools, Options, Document, Ruler. It would a time saver if I could somehow make pixels a default setting.
View 1 Replies View RelatedI recently added 2 monitors to my set up to bring my total to 3. I am trying to figure out the best way to work on one drawing, with 2 differant veiws on each of the 2 main screens.
I would like my main screen to have the plan view and the second monitor to have an isometric veiw (or whatever I need at the time) of the same drawing. Is there a way to have the same drawing opened up in another window, in one session of Autocad 2013. One on the main screen and one on the secondary.
I know there's the setting in the Tools/Application Options/File dialogue that allows you to set a system wide setting of which LOD that opens each time you activate an assembly.
But what about a file specific setting where you are able to set a specific LOD that always opens for that specific assembly file? Or will that conflict with the system wide settings?
Granted, I know Inventor will open the last saved LOD (based on that system wide setting), but my client has users that, for a lack of better terms, are not paying attention or being aware of what LOD they are opening and thus editing the wrong LOD, etc.
way to set the default to be 0. When we release a drawing we have it as Rev 0, Released for Fab..
It's a pain having to change it from 1 to 0 for every idw.
Work ~ Inventor Ultimate 2013 SP1.1
Win 7 64bit ~ i7 20gb
Nvidia Quadro FX 1700
Home ~ Inventor Ultimate 2013 SP1.1
Win 7 64bit i7 - 16gb
Nividia GeForce 9800 GT 1GB
240g Kingston HyperX SSD
I need to set the default template which is loaded when the AutoCAD application is launched. Is there a way to do this?
E.g. If I open AutoCAD, the template loaded is acad.dwt. But I want to change the default template to acadiso.dwt.
Every time I open Xara I have to change the default settings under "Utilities", "Options", "Units" from inches to pixels. There are other default settings I'd like to change as well, but my question is how do I change those settings to default so that when I open Xara, I don't have to go reset them? This is a PITA! I have searched through the help files and don't see any info on changing the standard default settings!
View 7 Replies View RelatedIn the hatch dialogue there is a setting to target the hatch to a specific layer. How does one set the default to ALWAYS be "Use Current"?
Attached jpg shows the target layer as ffbrg, but I want that to ALWAYS read "Use Current" when creating a NEW hartch. In other words, I am happily working in a specific layer creating all these hatches and then realize LATER that all the hatches were in different layers causing great confusiion and havoc.
Looking for registry keys to control the default attachment type (Full, Relative, & No Path) for XRef, Image, PDF, & DWF in the attachment dialog. (I'm using C3D but this applies to plain ACad also).
For XRef the key is:
HKEY_CURRENT_USERSoftwareAutodeskAutoCADR18.2ACAD-A000:409ProfilesMyWorkSpaceDialogsXattachDialog
The value is "PathType" DWORD = 1 for relativepath
For Image the key is:
HKEY_CURRENT_USERSoftwareAutodeskAutoCADR18.2ACAD-A000:409ISM
The value is "ImagePathType" DWORD = 1 for relative path (NOTE: this value didn't exist, once I created it, C3D used the key for both storing the value when closing C3D the reading the value when presenting the attach dialog).
Looking for keys that control PDF & DWF attachments.
I just installed the 2012 version, and I clicked the "Migrate Custom Setting" where my old setting from 2010 was generated. How can I reverse this or resetting it up to its original/ default when you first time to open the CAD2012?
View 2 Replies View Related