AutoCad :: AIA Standard Seems To Have Layer 0 As Default Setting
Feb 7, 2013AIA standard seems to have layer '0' as a default setting. What is the line weight assigned to this layer?
View 1 Replies
ADVERTISEMENT
AutoCAD LT :: Set Default Layer Setting In Hatch Command To Use Current
Feb 1, 2012In the hatch dialogue there is a setting to target the hatch to a specific layer. How does one set the default to ALWAYS be "Use Current"?
Attached jpg shows the target layer as ffbrg, but I want that to ALWAYS read "Use Current" when creating a NEW hartch. In other words, I am happily working in a specific layer creating all these hatches and then realize LATER that all the hatches were in different layers causing great confusiion and havoc.
AutoCAD 2013 :: Setting Up Default Setting For Lab Environment
Sep 4, 2012Best practices for setting up systems in a lab environment. We have a lab enviroment of about 200 systems that access AutoCad, Inventor, Mechanical and others.
We need to have a customized interface come up when Autocad is opened by students.I have read that you can do this with profiles and workspaces and also with loading a acad.lsp file.
In the past we have just copied the Windows admin profile used to customize AutoCad to the default profile. In AutoCad 2013 that does not seem to grab everything. It doesn't seem to be the best way to do what we need.
We will also be moving to Windows 7 soon which will also cause an issue.I want to find the best way to do this with out having to deal with the Windows profile.
AutoCad :: How To Scale Down To Architecture Setting Standard Not Metric
Feb 9, 2012I have imported a ISO Shipping container but the scale is to large. How can I scale it down to architecture setting standard not metric. When I try to use the scale option all it does is makes it larger? I have not search yet do to time restrictions.
View 4 Replies View RelatedAutoCad :: Set And Save Standard Setting For All New Sheets That Work On?
Mar 29, 2012How to set & save a standard setting for all the new sheets that we work on? For eg: the dimensions, the text size etc.
View 4 Replies View RelatedGIMP :: Setting A Standard Brush
Apr 29, 2012How can I set the standard brush in GIMP? If I start GIMP, it chooses a fat brush at first and i have to change it always to a thin brush. How can I tell GIMP, that it uses the thin brush at the beginning?
View 2 Replies View RelatedAutoCad :: How To Get Default Dimensions Style STANDARD Back Into A Drawing
Nov 26, 2013How to get the default dimensions style "STANDARD" back into a drawing after it has been purged? I accidentally purged it and now I want it back. .
View 7 Replies View RelatedAutoCAD 2013 :: Setting Revert To Default
Dec 10, 2013I have 2 staff members who both have recently had problems with their custom settings from OPTIONS revert to the default settings every time they close out of AutoCad. One is using AutoCAD 2013 on W7 & the other is using AutoCAD 2014 on W8.1.
They have to reset their display, units, osnaps, etc regularly. I suggested creating a profile they can use until we resolve the problem,
AutoCAD 2013 :: Setting Text Default
May 29, 2012We just switched to AutoCAD 2013 and we are trying to figure out the best way to make a note with a leader. So far it seems the best thing to use is the keynote option called TEXT WITH STRAIGHT LEADER. If we just do text, no leader is automatically added. This seems to work except we cannot set the text to a default of arial.
Once the text is entered, it changes to ArchDim instead of the text we created called 'Arial'.
I'm the REVIT person in the office so I'm trying to figure out CAD as I go...hence I need easy instructions that I can try to navigate...
AutoCAD 2013 :: Setting Default Units
Jul 21, 2012I have just installed my autocad 2013 software. I've set the units to millimeters. But the workspace is still in inches. Even the dimentions are coming in inches. How to set the unit in millimeters?
View 1 Replies View RelatedAutoCAD 2010 :: Changing Arc Default Setting?
Dec 2, 2013Is there a way to change the default arc type in AutoCAD 2011? Currently, the ARC command defaults to "Start, End, Radius". I would like it to default to a 3-point arc.
View 9 Replies View RelatedAutoCad 2D :: How To Change The Default QLeader Setting
Feb 21, 2012How to change the default QLeader setting to match my personal preference, which is shown in my attachment?
View 9 Replies View RelatedAutoCAD Inventor :: Setting Default Level Of Detail
Mar 28, 2012I know there's the setting in the Tools/Application Options/File dialogue that allows you to set a system wide setting of which LOD that opens each time you activate an assembly.
But what about a file specific setting where you are able to set a specific LOD that always opens for that specific assembly file? Or will that conflict with the system wide settings?
Granted, I know Inventor will open the last saved LOD (based on that system wide setting), but my client has users that, for a lack of better terms, are not paying attention or being aware of what LOD they are opening and thus editing the wrong LOD, etc.
AutoCAD Inventor :: Revision Table / Setting It To Default To 0?
Aug 3, 2012way to set the default to be 0. When we release a drawing we have it as Rev 0, Released for Fab..
It's a pain having to change it from 1 to 0 for every idw.
Work ~ Inventor Ultimate 2013 SP1.1
Win 7 64bit ~ i7 20gb
Nvidia Quadro FX 1700
Home ~ Inventor Ultimate 2013 SP1.1
Win 7 64bit i7 - 16gb
Nividia GeForce 9800 GT 1GB
240g Kingston HyperX SSD
AutoCAD Inventor :: Setting Default Units 2013?
Sep 19, 2013I cannot for the life of me figure out how to do the following:
set my units to inches so I can enter dimensions in inches and see them displayed in inches.
AutoCad :: Setting Default Template Loaded Upon Launch
Jul 6, 2013I need to set the default template which is loaded when the AutoCAD application is launched. Is there a way to do this?
E.g. If I open AutoCAD, the template loaded is acad.dwt. But I want to change the default template to acadiso.dwt.
AutoCAD .NET :: Setting Attachment Path Default For XRef / PDF / Image / DWF
Jan 11, 2013Looking for registry keys to control the default attachment type (Full, Relative, & No Path) for XRef, Image, PDF, & DWF in the attachment dialog. (I'm using C3D but this applies to plain ACad also).
For XRef the key is:
HKEY_CURRENT_USERSoftwareAutodeskAutoCADR18.2ACAD-A000:409ProfilesMyWorkSpaceDialogsXattachDialog
The value is "PathType" DWORD = 1 for relativepath
For Image the key is:
HKEY_CURRENT_USERSoftwareAutodeskAutoCADR18.2ACAD-A000:409ISM
The value is "ImagePathType" DWORD = 1 for relative path (NOTE: this value didn't exist, once I created it, C3D used the key for both storing the value when closing C3D the reading the value when presenting the attach dialog).
Looking for keys that control PDF & DWF attachments.
AutoCAD 2010 :: Resetting 2012 To Its Original Or Default Setting
Feb 2, 2012I just installed the 2012 version, and I clicked the "Migrate Custom Setting" where my old setting from 2010 was generated. How can I reverse this or resetting it up to its original/ default when you first time to open the CAD2012?
View 2 Replies View RelatedAutoCAD 2010 :: Common Drafting Aids Default Display Setting
May 23, 2012How to change the default display settings for the common drafting aids(INFER, SNAP, GRID, ORTHO, POLAR, OSNAP, 3DOSNAP, OTRACK, DUCS, DYN, LWT, TPY, QP, SC) that are in the lower left corner of acad? when I open acad they are defaulted to icons. I'd prefer if the default display was to use the text descriptions noted above.
View 2 Replies View RelatedAutoCAD 2013 :: Change Default Setting For Array Path Command?
Jun 13, 2013Is there a way to change the default setting for the Array path command?
When I use the arraypath command I:
1st - Select Object
2nd - Select path curve
3rd - Type in "I" for Item to change to my desire spacing.
AutoCAD Inventor :: Linear Diametric Full Dimension Line Default Setting?
Apr 5, 2012Autodesk Inventor 2010 .idw Drawing Detail - Where is the default setting for "Full Dimension Line" so that I can set it to always be on when placing a linear diametric dimension? I would prefer to turn it off on the few occasions when dimensioning a diameter on a Detail View that does not include the center line rather than each and every diameter on a section view. This is necessary because a diameter symbol does not show up in the diameter dimension unless the full distance line it is selected, which is not always possible. I am aware of the Application Option setting that allows Linear Diametric as a preference, which becomes the default for all dimensions, and it is user specific rather than document specific.
View 2 Replies View RelatedAutoDesk Smoke :: RGBA Setting On Text Module Is Standard Set To RGBA
Jul 18, 2012I would like to see that the RGBA setting on the Text module is standard set to RGBA.
It isn't done until it is finished.
AutoCAD Visual LISP / AutoLISP :: How To Identify Files With Non-standard Layer Convention
Feb 20, 2013Is there a way to identify the files with a non-standard layer convention? Once identified and located,I plan to clean up manually
The folder I'm working with contains thousands of DWGs and I've discovered some layer names which differ from our standard naming conventions.
AutoCAD Inventor :: Setting Default Dimension Styles Different Than Object Defaults In Style Library
Apr 5, 2012We have, as our standard library default dimension style, a 1/32 fractional style, called "1/32-FRACTION". Various Object Types, like Linear Dimension are set to this Object Style. When I create a drawing, then these Object Defaults are in effect.
This means that, doing nothing while executing a dimension command, I get fractional dimensions by default. This works good.
However, sometimes I want to create a drawing where the default dimension style is "X.XXX-DECIMAL" without changing the Object Defaults found in the style library. I've tried to make the changes from within the style library and then save this as a template. However, when I try to make a drawing based on this template, Inventor states that the styles in the template differ from the styles in the library" and then busily goes about undoing what I careful did.
So I'm hoping there is something in the API I can call on to do this with a macro. Is it possible to write a macro that after you start a drawing, flips all the various Object Styles from "1/32-FRACTION" to "X.XXX-DECIMAL"?
VideoStudio :: Set Default Setting To 4x3?
Dec 2, 2011how can I set the default setting to 4x3? It seems to want to go to 16x9. figured out how to do it in VS3.
View 5 Replies View RelatedPhotoshop :: Setting PNG As Default
Aug 18, 2009I have Photoshop Elements 6, and I'm an animator. As you all might have guessed, I have to save a TON of frames! And every time I save a frame, I have to change the default format to .png (that's my preferred format anyway...) way that I could change the default for saving to PNG? Because changing this every single time is getting to be monotonous...
View 2 Replies View RelatedInDesign :: Setting CC As Default
Mar 30, 2014Why can't I set InDesign CC as default to open my Indd files? My only choice is Acrobat.
View 4 Replies View RelatedPaint.NET :: Change Default Setting From PNG To JPG?
Mar 26, 2013Is there a way to change the default setting from PNG to JPG.
View 1 Replies View RelatedPhotoshop :: Setting Default Image Size
Feb 20, 2012Currently I import raw images to my desktop, view in Bridge, make adjustments in Raw then batch process within photoshop, into JPG's.
The jpg resolution is always 240 pixels/inch How can I manually change the default image size??
Where in my work flow should this be set? In Photoshop, Raw image converter or bridge? I am using CS 4.
Photoshop :: Change DPI Setting From Default Of 72 To 300 When Saving For Web
Nov 3, 2013I need to change the dpi setting from the default of 72 to 300 when saving for the web. How do I do that?
View 4 Replies View RelatedPhotoshop :: Setting CC As Default To Open PSD Files
Nov 26, 2013Since installing Mac OS 10.9 and Photoshop CC, my .psd files do not want to open with Photoshop CC. If I open the "Get Info" window on a .psd file, I can set "Open with” to Adobe Photoshop CC for an individual file, but if I click “Change All” and click “Continue” in the pop-up box, it just goes back to “Adobe CS6.app”, no matter what I do. Even files created in PS CC revert to opening with CS6.
View 2 Replies View Related