I just installed the 2012 version, and I clicked the "Migrate Custom Setting" where my old setting from 2010 was generated. How can I reverse this or resetting it up to its original/ default when you first time to open the CAD2012?
View 2 RepliesIs there a way to change the default arc type in AutoCAD 2011? Currently, the ARC command defaults to "Start, End, Radius". I would like it to default to a 3-point arc.
View 9 Replies View RelatedIt happens when you turn on layer manager to adjust each layer settings such as name, line type or color and etc.
Problem is that each layer row disappears and each time it happens, only solution I know is to restart the computer. See the attached image.
How to change the default display settings for the common drafting aids(INFER, SNAP, GRID, ORTHO, POLAR, OSNAP, 3DOSNAP, OTRACK, DUCS, DYN, LWT, TPY, QP, SC) that are in the lower left corner of acad? when I open acad they are defaulted to icons. I'd prefer if the default display was to use the text descriptions noted above.
View 2 Replies View Relatedi click on the brush and change its color and or size then, when I go to paint it goes back to previous settings. (after that I can change its setting and it will work, but I always have to make a mark with the settings I don't want before I can change it to desired settings)
View 1 Replies View RelatedBest practices for setting up systems in a lab environment. We have a lab enviroment of about 200 systems that access AutoCad, Inventor, Mechanical and others.
We need to have a customized interface come up when Autocad is opened by students.I have read that you can do this with profiles and workspaces and also with loading a acad.lsp file.
In the past we have just copied the Windows admin profile used to customize AutoCad to the default profile. In AutoCad 2013 that does not seem to grab everything. It doesn't seem to be the best way to do what we need.
We will also be moving to Windows 7 soon which will also cause an issue.I want to find the best way to do this with out having to deal with the Windows profile.
Twice now, upon a restart of my computer, Photoshop has reset to factory settings, and deleted all my custom brushes I've made since a particular point in time. I've had to remake some brushes for my digital art course twice, and now I'll have to do it a third time. This is EXTREMELY DISTRESSING...
This started happening only recently. I can only guess perhaps an update to Windows or something has really jerked up my Photoshop, not sure.
My dockers have become messed-up. Some are no longer visible etc.
How do I reset the Dockers to default without resetting the whole workspace (X5 version 15.2.0.686)?
In PE 10, there was a reset tools option. I don't see this in PE 11. Is there a way to do this. If not, bring it back! It was a great tool.
View 2 Replies View RelatedWe're about to roll out LT 2012 now the SP1 is out, normally I would run round and change the default options by hand (template locations, support file paths etc..) Is there any way I can do this in a macro, or some other way, which means I don't have to go to 100 PC's?
View 1 Replies View RelatedIs this supported by Autodesk, and will installing both products create any issues?
View 3 Replies View RelatedTrying to set up Plant 3D so i can produce iso drawings. We have our pipe routed and tagged. When we select a pipe line that consist of only five or 6 parts (pipe, elbows, etc) it breaks the isos up into that amound of drawings files.
View 0 Replies View RelatedI have 2 staff members who both have recently had problems with their custom settings from OPTIONS revert to the default settings every time they close out of AutoCad. One is using AutoCAD 2013 on W7 & the other is using AutoCAD 2014 on W8.1.
They have to reset their display, units, osnaps, etc regularly. I suggested creating a profile they can use until we resolve the problem,
We just switched to AutoCAD 2013 and we are trying to figure out the best way to make a note with a leader. So far it seems the best thing to use is the keynote option called TEXT WITH STRAIGHT LEADER. If we just do text, no leader is automatically added. This seems to work except we cannot set the text to a default of arial.
Once the text is entered, it changes to ArchDim instead of the text we created called 'Arial'.
I'm the REVIT person in the office so I'm trying to figure out CAD as I go...hence I need easy instructions that I can try to navigate...
I have just installed my autocad 2013 software. I've set the units to millimeters. But the workspace is still in inches. Even the dimentions are coming in inches. How to set the unit in millimeters?
View 1 Replies View RelatedHow to change the default QLeader setting to match my personal preference, which is shown in my attachment?
View 9 Replies View RelatedAIA standard seems to have layer '0' as a default setting. What is the line weight assigned to this layer?
View 1 Replies View RelatedIs there any way to stop the flipping of the solid/sketch view from iso to normal?
its annoying to make changes to a sketch and constantly have to re orient the part after finishing a sketch, I dont want the solid model to return to iso view after sketching, is there a setting for this?
I know there's the setting in the Tools/Application Options/File dialogue that allows you to set a system wide setting of which LOD that opens each time you activate an assembly.
But what about a file specific setting where you are able to set a specific LOD that always opens for that specific assembly file? Or will that conflict with the system wide settings?
Granted, I know Inventor will open the last saved LOD (based on that system wide setting), but my client has users that, for a lack of better terms, are not paying attention or being aware of what LOD they are opening and thus editing the wrong LOD, etc.
way to set the default to be 0. When we release a drawing we have it as Rev 0, Released for Fab..
It's a pain having to change it from 1 to 0 for every idw.
Work ~ Inventor Ultimate 2013 SP1.1
Win 7 64bit ~ i7 20gb
Nvidia Quadro FX 1700
Home ~ Inventor Ultimate 2013 SP1.1
Win 7 64bit i7 - 16gb
Nividia GeForce 9800 GT 1GB
240g Kingston HyperX SSD
I cannot for the life of me figure out how to do the following:
set my units to inches so I can enter dimensions in inches and see them displayed in inches.
I need to set the default template which is loaded when the AutoCAD application is launched. Is there a way to do this?
E.g. If I open AutoCAD, the template loaded is acad.dwt. But I want to change the default template to acadiso.dwt.
I have a client who has a customized workstation in 2012 and is trying to move to 2014. We have gotten most of it done but theyaretryingtoloadacustomlipsroutineanditkeepsfailing.
Image attached.
In the hatch dialogue there is a setting to target the hatch to a specific layer. How does one set the default to ALWAYS be "Use Current"?
Attached jpg shows the target layer as ffbrg, but I want that to ALWAYS read "Use Current" when creating a NEW hartch. In other words, I am happily working in a specific layer creating all these hatches and then realize LATER that all the hatches were in different layers causing great confusiion and havoc.
Looking for registry keys to control the default attachment type (Full, Relative, & No Path) for XRef, Image, PDF, & DWF in the attachment dialog. (I'm using C3D but this applies to plain ACad also).
For XRef the key is:
HKEY_CURRENT_USERSoftwareAutodeskAutoCADR18.2ACAD-A000:409ProfilesMyWorkSpaceDialogsXattachDialog
The value is "PathType" DWORD = 1 for relativepath
For Image the key is:
HKEY_CURRENT_USERSoftwareAutodeskAutoCADR18.2ACAD-A000:409ISM
The value is "ImagePathType" DWORD = 1 for relative path (NOTE: this value didn't exist, once I created it, C3D used the key for both storing the value when closing C3D the reading the value when presenting the attach dialog).
Looking for keys that control PDF & DWF attachments.
Is there a way to change the default setting for the Array path command?
When I use the arraypath command I:
1st - Select Object
2nd - Select path curve
3rd - Type in "I" for Item to change to my desire spacing.
Autodesk Inventor 2010 .idw Drawing Detail - Where is the default setting for "Full Dimension Line" so that I can set it to always be on when placing a linear diametric dimension? I would prefer to turn it off on the few occasions when dimensioning a diameter on a Detail View that does not include the center line rather than each and every diameter on a section view. This is necessary because a diameter symbol does not show up in the diameter dimension unless the full distance line it is selected, which is not always possible. I am aware of the Application Option setting that allows Linear Diametric as a preference, which becomes the default for all dimensions, and it is user specific rather than document specific.
View 2 Replies View RelatedI'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:
1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.
2. I wrote this in the heading of the form's
- Imports Autodesk.AutoCAD.Interop
-Imports Autodesk.AutoCAD.Interop.Common
3. In the event Click of the Button1 I put this:
Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application
AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application
Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document
acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2
'Draw a line
Dim PT1(2) As Double
[code].....
I recently loaded several versions of AutoCAD on to a Windows 7 machine. ALL versions will open a drawing if double-clicked from windows explorer, but if I try to open through AutoCAD, the program freezes as soon as I click on the "Open" button. This is true for AutoCAD 2010 through 2012.
Machine Specs:
Dell Optiplex 990
250GB HD
8GB Ram
I7-2600 proc
AMD Radeon HD 6670 (1Gb) Video Card
I also cannot open multiple instances of ANY version of AutoCAD in Windows 7.
We have, as our standard library default dimension style, a 1/32 fractional style, called "1/32-FRACTION". Various Object Types, like Linear Dimension are set to this Object Style. When I create a drawing, then these Object Defaults are in effect.
This means that, doing nothing while executing a dimension command, I get fractional dimensions by default. This works good.
However, sometimes I want to create a drawing where the default dimension style is "X.XXX-DECIMAL" without changing the Object Defaults found in the style library. I've tried to make the changes from within the style library and then save this as a template. However, when I try to make a drawing based on this template, Inventor states that the styles in the template differ from the styles in the library" and then busily goes about undoing what I careful did.
So I'm hoping there is something in the API I can call on to do this with a macro. Is it possible to write a macro that after you start a drawing, flips all the various Object Styles from "1/32-FRACTION" to "X.XXX-DECIMAL"?
how can I set the default setting to 4x3? It seems to want to go to 16x9. figured out how to do it in VS3.
View 5 Replies View Related