I just recently had to install 2009 from map 2008. When I open drawings last worked on and saved in 2008 and open them in civil 3d 2009, I get drawings that freeze up upon opening. Some will eventually open, showing errors. Others will never open and just freeze up.
View 2 RepliesIs there a way to plot multiple drawings in Acad 2009 without opening each drawing file?
View 1 Replies View RelatedI get the attached when opening certain drawings which fails to load my acaddoc.lsp and so several useful lisps don't get loaded.
a successful drawing opening shows the following
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I'm having an issue with my cad files that were done with Civil 3D 2012. When we made the jump to Civil 3D 2014 all my drawings seem to be corrupt. Now I have pipe networks in my base file. I have tired recovering and recoverall but no luck. I can send the CAD file.
View 1 Replies View RelatedMy laptop crashed with 2005 but I still have the disks with my drawings stored in them. The 2005 is so old it won't load onto Win7 in my new laptop. But I do have a friend who has 2009. Can I still access my drawings.
View 9 Replies View RelatedI am running the new auto cad civil 3d 2014, downloaded from the design suite premium. I have left all of the programs installed (as a I saw that a few people chose to uninstall several of the programs). I am running auto cad on an @xi workstation, 4.1ghz processor, 16gb corsair vengence heatspred ram, 240gb ssd operating drive, 2tb storage raid 0 configuration storage drives, NVIDIA K2000 graphics card. It took me a while to configure the graphics settings within auto cad due to the high resolution, text is being portayed as small in some cases, commands are huge in others.
I am still adjusting all of those, however my real problem is that when I open certain drawings the program immediatly goes to not responding, and when I am working back and forth and trying to open multiple drawings it does the same. Just opening the program off of my desktop on a cold-start up takes maybe 15 seconds to be fully functional, the same with certain drawings. However others just seem to not want to be opened. This occurs with drawings large and small. Some large drawings open perfectly while some small ones crash, and vice versa. What could be the cause of this?
I'm attempting to uninstall autoCAD 2009, I keep getting a message reading:
- Error opening installation log file. Verify that the specified log file location exists and that you can write to it.
I have located the install log..... no what.
I work with a national company that creates criteria drawings for new projects. They recently changed to the 2012 version but they save it down to 2007. There has not been an issue with opening files with my 2009 version until recently. All of the computers in our office are unable to open these new files, although they claim nothing has changed. My CAD will pop up a fatal error and shut down whenever I attempt to open the new files. I downloaded the 2013 trial version and saved the file down to the older version, but that does not work either. Newer versions do not seem to be affected by the files, just my 2009 version. I tried creating a new file in 2013 and saved down to 2007 format. When I try to open it 2009 there is no issue. besides purchasing a new version of AutoCAD?
View 1 Replies View RelatedI'm in a situation where I need to share my drawings with another guy in a different office an hour away. I'm using 2010 and he's on 2009. What is the best way for each of us to send drawings back and forth, and still be able to tweak each others work?
View 7 Replies View RelatedWhere is the best place to get symbols for pavement markings and signage in C3D2009? I used to get the symbols from symbol manager in LDD. Is there a better library in Design Center?
View 2 Replies View RelatedI go back and forth between older drawings in 2009 a lot while my current drawings are in Civil 3d 2012. Is there a way to copy linework from a Civil 3D drawing into my 2009 drawing easily. I used to be able to copy and paste between drawings but that doesn't work between these versions. Right now I have to wblock out the linework and open that new drawing and save as 2004 then import it into the old drawing.
View 1 Replies View Relatedmost times i have to work on multiple drawings. i open these drawings all at once, but due to their size, it takes some time to open all the files. It would be nice if autocad would stay in the background while opening rather than forcing itself to be the focused programs after each file is opened. this really destroys the ability to multitask and honestly just seems arrogant at this point...
View 3 Replies View RelatedI modified a routine that processed xref names & paths w/in a set of folders. Thie original version would open each drawing & do its thing. THis would take about 20 minutes (aprroximately 90 files). I modified it to work w/o opening each drawing. This still takes about 20 minutes.
I would have though that not avtually opeing each drawing would dramitically decrease the overall time required to run this routine.
Since I'm so darn clever I decided I could "save as" a 2009C3d-32bit drawing to 2011C3D-64bit. This drawing was working just peachy for a while. There are no data links. The drawing contained 2009 surface and point groups. I imported some Pipe styles created in 2011. Created 800' of profile,and my pipe network. When I was closing the drawing I got a lot of errors wanting to know if I wanted to save changes to VBA-pipes. Seemed like a good idea at the time so I said Yes. This morning I opened the drawing and it's there but the surface from 2009 no longer has it's Definition data. The point group is gone, breaklines are gone. I needed to remove one lousy bad point out of my surface. The points in the drawing now have three copies and one has the elevation in the point description and you can't fix it. The 3 labels are all tied together and if you erase one they all disappear. I am going to wing it from here and get this puppy out of the office with a little old fashioned autocad. This is my question. Should I have just started a new drawing in 2011, clipped all my old line work and text from the 2009, imported the points and rebuilt my surface? Did I do something wrong and there was some way I should have been able to make this work? I was running 2009 and 2011 on my computer but had to remove 2009 last week. It no longer like livng with his better looking brother "2011" and I had to put him out. I have numerous small projects created in 2009 so this will happen again.
View 5 Replies View RelatedWhen I open a drawing in Autocad 2014, the drawing name opens as drawing1 or drawing2, etc. The files have been saved with a drawing name, however when I open them after saving they open as a unsaved file.
View 1 Replies View RelatedI have been given a new lap top plus the updated AutoCAD rev. 2012.Supposedly it is superior to my old laptop but... it runs slower, the mouse action is awful, it's like stirring cold porridge.
Anyway, I have spent the first week battling with various bits, trying to get it to look & feel like my previous laptop using 2010.
The big issue I have is upon start up. Rather than loading the standard AutoCAD "drawing 1" regardless, I want to have the browser open up so I can select the' previous drawings loaded on my last session or select a new drawing or browse folders to find the drawing I want.
how I managed to switch this on, back when I managed it on 2010 version.I have given up on running up & down the menus.
I receive this pop up message every time I open a drawing. How to stop this from happening??
Not sure what info you may need I'm running windows 7 with autocad 2010. I also have autocad 2005 loaded on the same machine and this box does not appear when opening drawings with it.
Im not talking about osnap, I am talkin about snap which limits your cursor. When I open exisitng drawings, some of them have snap turned on and it is bothering me. Is there a way to adjust your settings to always have snap turned off?
View 1 Replies View RelatedRscently upgraded from xp to win 8, re installed autocad 2011.
Now when I try to open a drawing from within autocad my system crashes, I get a flash of horizontal lines then two blank screens.
Tried running narrator but just get static through the speakers, I have to hit the re start button to get back in.
I can open a drawing from explorer if autocad is not allready running, autocad starts and the drawing opens with no problems. but if I try to open another drawing we crash.
I am the only one using C3D 2012 in our office and the other users are complaining that they cannot insert blocks or paste clipboard content into drawings that I have saved from C3D 2012. This is true whether I use "C3D as AutoCAD" or the full C3D functionality. I understand that the newer C3D objects are not compatible with the older version but to my knowledge there are no C3D objects included in the drawings in question.
C3D 2009 users can wblock the drawing contents from the Model tab and each Layout tab, and reassemble those parts. Then they are able to insert blocks and paste content again. It is a very inconvenient solution and we only use it when the situation is critical. It also breaks sheet view linkage to our Sheet Sets when we do the wblock fix.
I've asked the others to try using Design Center or Windows paste (CTRL+V) and see if that works the next time they encounter the problem. I don't have C3D 2009 installed or I would have tested these ideas already. The others will not install C3D 2012 and so far the owner's will not force them to.
We've recently upgraded a large project from Civil 3D 2012 to Civil 3D 2014 and for the most part things have migrated well.
On this project as well as others that have been migrated, I've been noticing this and similar messages re: modified in a previous version when the dref's synchronize:
"FG-STREET A was modified in a previous version of the software. Changes in the current were overwritten when the data reference was synchronized."
The steps we used for converting this project in order are:
Set Data shortcuts working folder.
Migrate Survey Database.
Open/save base drawing containing survey & EG surface.
Open/save all C3d source dwgs before opening any plan sheets.
Open/save all C3d plan sheets.
Because of the warning message I thought I'd try the "Migrating Data Shortcuts" following the instructions.
Use the stand-alone Data Shortcuts Editor to save one or more data shortcuts to a specified folder. If the shortcuts were created with a previous version of AutoCAD Civil 3D, they will be updated to the current format in this process.
When following the steps in the Data Shortcuts Editor, when I get to step 5, select the folder & choose Saveas, I see the following message that they will be saved in 2009 format?
Isn't that a downgrade? How these modified in a previous version messages?
I'm still trying to figure out if they are a benign message or if they are something I should be concerned with. 95% of the shortcuts on the project sync normally & seem to work fine other than an occasional disappearing profile in the sheet profiles.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
I have AutoCad LT and I can't find a way to scroll through folders full of drawings without opening each one. I have the Autocad Viewer but I can't find a way to make it do this, what are you pros doing, I know there has to be something out there. The rest of the world has way to view file i.e. Photoshop has Bridge, Nikon Has View NX, I do photography and there's a ton of ways to view images even at full res .
View 9 Replies View RelatedI have a problem with my autocad. The administrator started me out on AutoCAD 2012 global.
The problem existed then so. Now he has me on AutoCAD 2012 Imperial . The problem still exists.
When I open an existing drawing that I have never opened with my version of Autocad. It opens the drawing in Metric units. I do not want Metric units. I would like it in Imperial units. Every time I open an existing drawing, I have to change the units to Architectural.
When I give the open command, it takes 3 to 5 minuites just to get the file selection dialog box. I am running Windows 7.
View 8 Replies View RelatedI've recently run into a problem that involves xrefs. Basically, I cannot open files that are being xrefed in other drawings when those drawings are currently open. AutoCAD Architecture will only allow me to open the xrefed file as a read-only version. For example:
I have 1ST FLOOR PLAN (drawing file) xrefed into A-201.00 FIRST FLOOR PLAN (sheet file). If one of my team members has the sheet file open with the drawing file loaded, then AutoCAD will only let me open the drawing file as a read-only file. But if my team member has the sheet file open with the drawing file unloaded, then I can open the drawing file without any problems.
I have never had this type of problem with xrefs before and so I'm wondering if it's an AutoCAD Architecture 2012 bug.
I have a customer who uses Solid Works and I of course have Inventor 2013. Before I get into discussion with them about software compatability I wanted to ask the experts! Can I open Solid Works drawings with Inventor?
View 6 Replies View RelatedWe have used Inventor 2010 with PSP 2011.
- Recently we have upgrade to Inventor 2012.
- Installed pspro_cad_fp_10.0.39.3 update for PSP Server and for PSP Clients.
And now, some drawings we can not open in Inventor 2012. Inventor crashes!
But some drawings we are lucky to be able to open and work with.
Drawings have the same template.
If the drawing is locked (read only) then inventor 2012 can open it without a crash.
If I drag&drop drawing out from PSP onto my Desktop, Inventor 2012 can open drawing without problems.
So we are not able to work with some drawings in Inventor 2012 and PSP 2011.
As the first and quick (and 100%) solution - rollback to Inventor 2010 can cost us about 5 man-days of work. (Because we have done some work in Inventor 2012 allready and will not be able to work with this in Inventor 2010)
Is there a way to increase the access time so printing is faster?
I have AutoCAD 2013 and access drawings over VPN (6 meg pipe).
Both opening the drawings and especially printing them take a very long time.
It takes about 8 seconds to open drawings, due to all the modules loading on the bottom-left of AutoCAD. Printing takes even longer than opening the drawings.
Is there a setting I can change to speed-up access time?
When ever i open a dwg file (it contains Xref files) it's take a long time to open... and i tried the same file to open in Autocad 2007, it's opened with in a second.... and also note that the Autocad 2007 installed in a Dual core pc with 4gb RAM.. and the 2012 is installed in Core i7 12gb ram with NVIDIA graphics card.. and it's 64 bit Windows 7 too.. When i try to open a file it's shows "Loading c:/ ....... base.dwg, etc.. ..
View 8 Replies View RelatedFor the past 2 days when I switch from one drawing to another, my layout tabs are not updating and stay the same as the previous drawings. I have to do a regen to get the proper tabs in place. All the layouts are there...it is just the tabs that are messed up. Once I click on one of the tabs they straighten themselves out as well, but on that first selection I never get the correct drawing that I want!
View 6 Replies View RelatedTo open .cal drawings, I've alway hit the "insert" tab and selected insert raster image from the dropdown menu.
Today, the "insert" tab doesn't create a dropdown menu. It opens a whole "insert" toolbar without any reference to raster images.
How do I open my .cal files and why did autoCAD change itself?