I have a huge site plan and almost all the layers are at different Z-axis values...I have read up the previuos threads on flattening and tried out the different lisps. While some lines are working...others are not changing and I cant proceed with such a messed up file....is there any other way out of this?..
View 9 RepliesI can't seem to create a planar surface that shows up in the tool space as a TIN.
Some background, I have a TIN of a pile of dirt that I created from a point cloud (it shows up in the toolspace under the surface section). I also have a plane that intersects that dirt pile which indicates ground level. I want to be able to calculate the volume of the dirt pile by creating a volume TIN with the ground plane and pile TIN, but the ground plane does not show up in the toolspace under the surface section so I can't use it to create a volume TIN. I created the plane with the planar button in the ribbon and manually lined it up with the pile.
How can I convert this plane that is clearly in my project but not in the list of surfaces in the toolspace into a TIN to use in a volume TIN?
I'm running Civil 3d 2013 and you'll probably have to explain things like I'm 5 because I'm not familiar with the interface yet.
Is there a way to print planar surface of any model in inventor 2012? I know that autocad is able to print planar surface, but inventor is much better to use.
View 9 Replies View RelatedI am not sure what I am doing wrong but when I use the bend tool I am getting weird results. Does the surface to be bent have to be planar? See photo attachment.
View 4 Replies View RelatedI created a part that spans between two other pieces. The original part model does not have a twist in the "flat" surfaces, so it unfolds just fine, but it also does not represent the way the actual part fits, so it is difficult to determine if any other parts are fitting correctly up to it.
I had a problem getting a part to unfold before, and I was shown a method of creating a surface body and a thicken, which I have done with this part, but as of yet have had no success unfolding this part.
Is there anything that I can do since the sides are twisted and not planar?
In Solidworks I can emboss a sketch into a 'wavy' surface without difficulty.
If I try to do the same thing with Inventors 'Emboss' command It fails with "Only planar, cylindrical or conical faces are supported."
Surely there must be a way to achieve the same effect as in the first illustration, in Inventor ? Am I missing something obvious?
How do you merge (combine, make one, etc) 2 co-planar polygons which are part of the same Editable Poly object?
See attached.
I am Using Mental ray (max 2010). I have made a topological displacement map at a very low resolution. it is 222 pixels wide by 111 pixels tall (landscape) It is greyscale and low rez because the mesh I am applying it to is 222 faces wide by 111 faces long. (landscape also). I did this because I needed each pixel to become a "height map" in its own right. Everything is working the way i expected.
My problem is.... I need to now make each face z planar. as it stands, they are all tilted in the direction of the grey scale falloff. I have tried splitting the edges of all the faces (quad) and using the make planar (z) function of edit poly mod. No matter how I set the pivot / ucs, when I apply the make planar z , they all average out to the same z plane. I need them to adopt the average of their individual z planes. I can do this but have to do it face by face. That's 24642 faces.
I've read all I could on snaps, video tutorials, changed every setting.
the only time anything snaps is when I'm creating an object in which case I get a box and the object snaps to other objects, bounding boxes end points, etc.. (useless stuff) but it doesn't work at all otherwise, it does absolutely NOTHING while selecting an object or edible poly/mesh object vertices, etc..
I JUST WANT TO ALIGN A VERTEX TO ANOTHER VERTEX.
I've seen videos of people just dragging the axis to another vertex and that vertex automatically aligning to it... why the heck can't that work for me? I don't even get a line, nothing that looks like any tutorials out there. Everything behaves the exact same way as without snaps. you can't even tell the difference moving things around except there is a little circle at the center of the gizmo. I even checked every box in the snaps settings. It makes me want to throw the computer out the window that it takes 3 hours and still nothing works.
Ultimately I just want to select a grid of vertices and align them in a planar xy axis at the same z value as a single of my choice... why is this so impossible?
I would like to know how can put planar surface to solid object which surface is curved like cylinder for example. When start draw from first point rectangle of planar surface follow x cordinate not that solid object. How to do that simply?
View 9 Replies View RelatedIs there a way to cut a solid into two pieces using a non-planar cutting plane? I have been tasked with calculating the volume of concrete damage in a chute block. I have a sketch of the damage on the chute block. I created the chute block as a solid and then drew the damaged area extents using plines. This created non-planar plines. Is there a way to get this to work that will allow me to see the volume of the concrete damage? I need an easy way to do this, there are 50 chute blocks all the same size but with varying degrees of damage
View 1 Replies View Relatedwhat is the difference between a sketch and a planar sketch?
View 2 Replies View RelatedI'm using ACAD LT 2008.
When i try to copy paste some drawing entities from a heavy drawing file to any other file, the program blocks and says 'not responding', endlessly. So i always have to shutdown the program. I experience the same problem using the designcenter: when I try to copy a layout into another drawing, my computer gets stuck.
Another annoying problem with these files is that they are so heavy, while in fact they shouldn't be. I tried the aectoacad file command. In result the file id half as big, but after I open it and save it, again is the original size.
Every now and then I go back and try to use publish to speed up printing but I always go back to plotting one by one.
I work in a housing construction office and I have 10 separate drawings side by side in model space for house plans that I need plot separate to give to certain people. My problem isn't that I can't publish them separately its that I can't save them over existing pdf's individually predetermined.
Q1. do i just have to go through and change every layout name before or after i publish?
Q2. how do i change the output publish location?
Q3. can each layout be saved to a different existing pdf and remember it?
Q3. can i save these setting across to a new drawing?
I know there is a procedure to turn a surface into a planar surface, but i don't really know if autocad can do that, or how to do it. By this procedure i mead transforming a cone into a surface, a cilinder into a surface for example, but in my case the main surface is not a basic surface (as show in the image) and the procedure is quite tricky.
View 9 Replies View RelatedI have a CAD Drawing in 2010 format. I printed the same drawing from two different types of printer. One from HP Officejet K7108 printer and another from HP Officejet 7000 Wide Format Printer - E809a. But the scale of both drawings are not same.
View 9 Replies View RelatedI am having a problem with Autocad12 I am using at a friends office: we both can open, edit, and save the same drawing. This is a real problem as you can imagine. We are running Windows 7 and are using DROPBOX for file storage. DWL are being created but for some reason they are not being used. On the otherhand if I try to open a file I created I do actually get locked out - just not from the other computer.
Just did a test - when I log in directly to the hard drive instead of the network it locks me out if I attempt to load it. If I login through DROPBOX it does not.
how I can have autocad recognize the lock files in DROPBOX folders?
Im using AutoCAD 2012 and am trying to publish a set of drawings to PDF but when i do it cuts off some of my title block, but when I plot to PDF the drawing is fine.
View 1 Replies View RelatedI am new to autocad, i wanted to know if i can convert 2d drawings to 3d ?. I work in the aluminum openings industry making doors and windows, i have all my aluminum profiles drawing in 2d.dwg and i want to convert it to a 3d model and then extrude it for a certain length so that it look like an aluminum profiles bars ?
View 7 Replies View RelatedI draw several different drawings in the same dwg file - just offset from each other in the XY-plane.
I want to bring these together on top of each other to form the complete picture, but I'm not sure how to accomplish this in an easy way. If it was a one time thing I would just use the Move command, but the goal is also for the combined picture to be updated as the separate drawings are changed - not realtime - but maybe in some x-ref kinda way.
The whole thing would be easy if the separate drawings were also separate files, but as they are not I'm not sure how to solve it...
I'm currently running AutoCAD LT 2013, and I've been asked to compare two dwg files; one has been drawn using LT 2013 and the other has been drawn using an older version of the software.
Is there any way or any plug that can be used in LT 13 to compare the two drawings?
I've looked online and the only program i can find is Furix but that doesnt allow for usage on the LT version of autoCAD.
I worked in a drawing(#1) a few weeks ago and since then have copy pasted the drawings to be scaled at 1 1/2" into another drawing(#2) and have since been only working in this drawing(#2).
In the original drawing(#1), I was able to scale my drawings at 1 1/2" without any problems but in my second drawing(#2), when I try to scale drawings at 1 1/2" all of my annotative bubbles get ridiculously small.
Once having discovered this, I copy pasted my second drawing'(#2) components into a 'Copy' of my original drawing(#1), thinking that my second drawing(#2) file might have been contaminated, but with no luck because I could see that within the Same viewport scaled at 1 1/2" the original drawing(#1) was scaled properly but the second drawing'(#2) symbols became very small.
I am stuck.
My friend is a qualified architect that has a limited knowledge of Autocad. He has been able to complete the drawings. He is using Autocad 3.3 and is having trouble placing text into his drawings and sizing it. How to achieve this or point me specifically to a tutorial that addresses this. I am aware it probably is a language issue and I don't understand the comand prompts and process.
View 6 Replies View RelatedI work with autocad 2011 and my problem is the following.
When my 3D vieuwport is properly set in my layout page. I try to plot my layout. when i've compledet my plotsettings I first check out that everyting is ok. and evrything looks great. but when I plot everything is plotted exept the 3D drawing. althoug the 3d drawing is shown on the plot preview. (look at pdf's to see what I mean).
Actual-Plot_3D.pdf
Plot-preview_3D.pdf
While making a drawing and there is something which I want to turn visibilty of for a while, I will select from a sub-menu "Visibility" (see the attachment) But what I must do if I want to turn the visibility on again for example to that hole shown in screen shot?
View 2 Replies View RelatedAs Autodesk has not made changes that prevent excess registered application ID's from spreading from xref to sheets, I am guessing many companies have the issue and do not know it.
Its been a while since I worked with a crowd of highway designers whose attitude was AutoCad was AutoCrud (I was offended too), but I would bet the crop of people doing caltrans work is a bit new to the wild west of dwg issues.
I would encourage some of you out there to try this code on your drawing and see if you get more than say, 4000:
(vla-get-count (vla-get-registeredapplications (vla-get-activedocument (vlax-get-acad-object))))You can also run that on dwg's without opening fully in the editor, if you want to list app id counts for entire projects fast.
Simply cleaning app ids is not good enough to deal with the problem, you must discover where they come from, and catching them dirty is the best way. It alsways some consultant...never H&A though..Maybe if the Caltrans group discovers the issue, we can get movement by Autodesk on a real fix.They have done ok at cleaning tools so far, but its a big waste of time and file space. URL.....
I'm using Cad 2011,how do u generate 2D drawings from a 3D object,i know that the command only works on layout n on 2013 the command is "Base".So wat is it on 2011?
View 4 Replies View RelatedI am using 2D-AutoCAD, and trying to plot a drawing on a printer, the drawing is different colors and I want to print it black on white paper, I am unable to select the proper .ctb file from the Plot Style Table pulldown, it does not show up? I have plotted other drawing sets using this method but for some reason cant do it on this particular set.
View 3 Replies View RelatedHow or where to go to find out how to convert Autocad LT drawings into programs our CNC machining centers can use? Autocad assured me it would do this when we bought it. I just can't seem to find any info on it.
View 8 Replies View RelatedI'm running Map 2014 SP1 on my machine and the rest of the users in our organization are running Map 2013.
If I save a drawing back to a dwg 2010 version all is fine, but if I save the same drawing to a dwg 2013 version other users are not able to activate and query from it, even though they are otherwise still able to open and work with the drawing.
Is it possible to persist a custom object within CAD at a per drawing level? Basically we want to create a web service that pulls in a project name / project number etc etc from our project management software and persist this to the cad drawing itself so it is available when reopened?
View 5 Replies View Related