AutoCAD Inventor :: Bend Along Non-planar Surface?
Dec 26, 2013I am not sure what I am doing wrong but when I use the bend tool I am getting weird results. Does the surface to be bent have to be planar? See photo attachment.
View 4 Replies
ADVERTISEMENT
AutoCAD Inventor :: How To Print Planar Surface
Jun 30, 2013Is there a way to print planar surface of any model in inventor 2012? I know that autocad is able to print planar surface, but inventor is much better to use.
View 9 Replies View RelatedAutoCad 3D :: How To Put Planar Surface To Solid Object Which Surface Is Curved Like Cylinder
Sep 2, 2013I would like to know how can put planar surface to solid object which surface is curved like cylinder for example. When start draw from first point rectangle of planar surface follow x cordinate not that solid object. How to do that simply?
View 9 Replies View RelatedAutoCad 3D :: Turn Surface Into Planar Surface
Jul 8, 2008I know there is a procedure to turn a surface into a planar surface, but i don't really know if autocad can do that, or how to do it. By this procedure i mead transforming a cone into a surface, a cilinder into a surface for example, but in my case the main surface is not a basic surface (as show in the image) and the procedure is quite tricky.
View 9 Replies View RelatedAutoCAD Civil 3D :: Creating A TIN Of Planar Surface
May 27, 2012I can't seem to create a planar surface that shows up in the tool space as a TIN.
Some background, I have a TIN of a pile of dirt that I created from a point cloud (it shows up in the toolspace under the surface section). I also have a plane that intersects that dirt pile which indicates ground level. I want to be able to calculate the volume of the dirt pile by creating a volume TIN with the ground plane and pile TIN, but the ground plane does not show up in the toolspace under the surface section so I can't use it to create a volume TIN. I created the plane with the planar button in the ribbon and manually lined it up with the pile.
How can I convert this plane that is clearly in my project but not in the list of surfaces in the toolspace into a TIN to use in a volume TIN?
I'm running Civil 3d 2013 and you'll probably have to explain things like I'm 5 because I'm not familiar with the interface yet.
AutoCad 3D :: How To Bend Down Start / End Of Swiped Helix Down To Surface
Jan 19, 2013how to bend down the start and end of the swiped helix down to the surface.
View 3 Replies View RelatedAutoCAD Inventor :: Unfold Non-planar Sheet Metal Part
Oct 31, 2011I created a part that spans between two other pieces. The original part model does not have a twist in the "flat" surfaces, so it unfolds just fine, but it also does not represent the way the actual part fits, so it is difficult to determine if any other parts are fitting correctly up to it.
I had a problem getting a part to unfold before, and I was shown a method of creating a surface body and a thicken, which I have done with this part, but as of yet have had no success unfolding this part.
Is there anything that I can do since the sides are twisted and not planar?
AutoCAD Inventor :: Emboss Command - Only Planar / Cylindrical Or Conical Faces Supported
Oct 3, 2013In Solidworks I can emboss a sketch into a 'wavy' surface without difficulty.
If I try to do the same thing with Inventors 'Emboss' command It fails with "Only planar, cylindrical or conical faces are supported."
Surely there must be a way to achieve the same effect as in the first illustration, in Inventor ? Am I missing something obvious?
AutoCAD Inventor :: Difference Between Sketch And Planar Sketch?
Mar 4, 2012what is the difference between a sketch and a planar sketch?
View 2 Replies View RelatedAutoCAD Inventor :: Cut Across Bend Feature
Dec 27, 2013I'm trying to use the cut across bend feature on a sheet metal part. However, when I check cut across bend, it grays out all of the other cutout options, and only has thickness as the only option. This is perplexing to me, because I can't think of too many times I'd need this option other than when there is more than one thickness of material I need to manipulate the profile onto.
I was to understand that this "cut across bend" is for use similar to the "normal cutout" command in solid edge? Keeps the cut perpendicular to the sheet face in a sheet metal part.
Cybertron PC
Intel Core i5-3470 CPU @ 3.20 GHz 3.60 GHz
16.0 GB RAM
Windows 7 Professional 64 Bit
3D Connexion Space Pilot
Inventor Professional 2014
Autocad Mechanical 2014
AutoCAD Inventor :: Can't Dimension A Bend
Jun 7, 2013I attached an IPT file that a customer sent us to manufacture for them.It's a rectangular aluminum tube with two bends.In the IDW when I try to place center points and dimension the radius it is not recognized.The original file was a STEP.
View 9 Replies View RelatedAutoCAD Inventor :: Is There A Way To Bend At Assembly
Feb 14, 2012Under the modify tab in a part file, I can drop down and click "bend part." We have a bunch of frames made out of stock tubing that are welded together, then bent as a whole. Is there a way to bend at the assembly? I want the model to represent the production process. I don't want to have to bend each tube alone, then reassemble. That would double my parts/part numbers.
View 9 Replies View RelatedAutoCAD Inventor :: How To Change Radius On A Bend
Oct 21, 2011I have been trying to bend a larger radius on a corner bend but i can not seem to be able to . I start out with a face of 46" x 82" i want to put a 1/2" bend up then a 1/2" bend out to make a z shape i'm using as a material .109 stainless steel and i want to end up with a 1/2" on the inside corners so that when i'm done i can flatten it out to get the proper sheer size for the piece the metal brake i'm using has a 1/2" die in thats why i trying to figure this out is their any way to put this kind of radius on the sheet metal bends.
View 2 Replies View RelatedAutoCAD Inventor :: Change The Down 90 To Bend FarSide 90?
Dec 2, 2013Using Inventor 2012 is it possible to change the down 90 to Bend FarSide 90?
View 4 Replies View RelatedAutoCAD Inventor :: Cut Across Bend Around A Rolled Tube
Feb 14, 2012I'm trying to do a usable and real flat pattern for a laser cut on this type of part and I'm not able to do a cut across bend or other wrap around face feature.
Any method to do such a feature ?
AutoCAD Inventor :: Bend A Cylinder At Several Places
Dec 27, 2012I want to do a simple bend of a cylinder. That is, I have made a 40inch length and want to bend it at several places.
I keep finding a reference to bend part but the tool does not exist in Inventor.
AutoCAD Inventor :: Retrieve A Bend From Sweep?
Oct 4, 2012I have created a pipe using sweep through 2 planes and 3d sketch. I want a specific bend on that pipe to be extracted for drawing purpose. How do I do that ?
View 9 Replies View RelatedAutoCAD Inventor :: How To Perform Bend In Flat Bar
Feb 21, 2012If i have even used the correct technique but how do i perform the bends in the flat bar so as the bottom and top section are vertical and the small mid section is on the angle. At the moment the mid section is displayed vertical when using the cub please see attached files.
View 4 Replies View RelatedAutoCAD Inventor :: Bend Extents Not Visible
Oct 21, 2013I have unfolded a 3D model into a flat plate, however the bend lines/extents do not appear in ISO.dwg
I doubled clicked into the view to access 'Display Options'. However, I cannot tick the box to display bend extents as this option is shaded out (refer to attached screen dump).
AutoCAD Inventor :: Dual Dimension A Bend
Apr 11, 2013I cannot figure out how to dual dimension a bend like so:
DIRECTION DEGREES RIMPERIAL [RMETRIC]
e.g. DOWN 90 R1/2"[13] preferred
or DOWN 90 R1/2"[R13] okay
There should be a degree symbol after the 90 in my examples but I can't figure out how to type it here. I can get DOWN 90 R1/2"[DOWN 90 R13] but it's too long.
AutoCAD Inventor :: Bend Notes On Drawing
Aug 13, 2012Is there a way to make Inventor automatically add a note, along the bend line, indicating bend direction, number of degrees and bend radius?
Also, in 2013, where are the bend tables located? I've checked the help file, and it's telling me cprogram filesautodeskinventor 2013design data
I followed that path, but I do not have the "design data" folder it's calling for.
AutoCAD Inventor :: Cannot Mirror A Bend In 2014
Jun 22, 2013Inventor 2014 LT / have run into a problem in a throw-away project I"m working on.
A simple example is to create a piece of 3x5x.125 flat bar, add a sketch giving you a bend line and bend the end of it. Now try to mirror the whole thing giving you a 3x10x.125 flat bar bent on both ends.
FWIW: My project isn't this simple - I know I can just make the FB and bend both ends ... this is an example of mirroring a bend not working.
AutoCAD Inventor :: Save DXF Without Bend Lines
Dec 31, 2011I am trying to save copy as dxf without bendlines so I can directly import the file into my waterject CAM software. There has to be a way to tell it not to add the benline layer.
View 7 Replies View RelatedAutoCAD Inventor :: Sheet Metal - Cut Across Bend
Dec 20, 2012I have a sheet metal door with a little bracket that gets welded to the inside lip through a cut-out in the face of the door. (see assembly)
I can't get the cut-out to line up flush with the inside lip of the door, as that is where the brackets gets welded to. the current aseembly is set-up the way I want, but I can't get a flat pattern on the door, becasue of the cut going across the bend.
I have checked off the "cut across bend" in the cut dialogue box, but this leaves a small (~1/32) lip in the cut-out and runs interference in the placement of the bracket.
Inventor Pro Suite 2013
Sean Farr
Product Designer at TESInc.ca
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
AutoCAD Inventor :: Why Can't Move Bend Tags
May 13, 2011Create a new sheet metal part make it a box of any size add four flanges then create a flat pattern. Save the file then create a drawing view of the flat pattern. All well and good so far... Now create a Table using the flat pattern view as the source, which creates a Bend table just fine.
Place the table on the sheet and Tags are added to the bend lines which is wonderful and great. Now try to move a tag.... BZZZZZZ your time is up you can't.
Yet in your Sheet Metal Annotations in Drawing - Wiki Help page in the Procedures - Create or edit a bend table - Create bend tags section it states:
Tip Drag the bend tag text away from the original position to add a leader to the bend tag. Is this a bug or something not set right on my system?
Manufacturer: Dell
Model: Precision T3500
Video Card: NVIDIA Quadro FX 3700
Video Driver: 8.17.12.6779
Processor: Intel® Xeon® CPU
W3503 @ 2.40GHz 2.40 GHz
Installed memory (RAM): 4.00 GB
System type: 64-bit Operating System
AutoCAD Inventor :: Bend Order Annotation With VBA?
Nov 3, 2011How do i get the bend order annotation # with vba?
View 1 Replies View RelatedAutoCAD Inventor :: How To Find Length Of A Bend
Oct 6, 2011I have some code that find the length of a bend and it works great until there is a cut operation that passes through the edge of the part and through the bend. When this cut exists the systems recognizes the single bend 2 times which is fineand it should, just that it should also then be able to determine the length of each segment. It appears to be providing the length of the first segment twice. Any way to get either the segmented lengths or the length of the bend without the cut? I need a total length and the code below gives wrong data for the one edge length. the attached file shows what I mean.
Sub Bends()
Dim oDoc As PartDocument
Set oDoc = ThisApplication.ActiveDocument
[Code]....
AutoCAD Inventor :: How To Cut Across Bend In The Attached Part
Oct 31, 2011I'm trying to cut across bend in the attached part. Usually this thing works quite good, but for some reason it's not letting me do it. What Am I doing wrong? How can I do it?
Inventor 2012 Pro.
I7 workstation
AutoCAD Inventor :: Bend 15 Degree At 800 Mm From Bottom
Dec 6, 2012I want to make this part that bend 15 degree at 800 mm from bottom. In my attempt.
First, I bend it 15 degree.
And, make flange from Face and upper flange then I stuck with error.
AutoCAD Inventor :: Any Way To Preload Info - Bend Radius
Feb 27, 2012Is there a way to preload information into Inventor in regards to the break press such as the dies being used or the ones available so the when the computer is deciding a bending radius,it know what tool we have?
Currently the bend radius is set to "radius", which i am assuming is default, but I can't figure out how to change that either, and depending on the thickness it will change, but like today it said I would need a 1/16th inch radius, but we don't have a 1/16th inch die,it is an 85 degree air bending setup,and has a 4 way die with smaller and bigger openings.
AutoCAD Inventor :: Edge Bend For Flat Pattern
Jul 31, 2013Any way of drawing an edge bend on a flat bit of copper so I can flat pattern it for the guys on the shop floor to make.
The problem comes with the edge bend, I have provided a picture of a simple bit of copper with various flat bends and a single edge bend. As the flat pattern shows to the right the edge bend is not flattered, This was drawn using a sketch the profile then using "face" . This is why I assume it does not work in flat pattern.
Is it possible to draw an edge bend with a command to allow it to flat pattern? if so which command and how?
autodesk 2012
Windows 7.
