AutoCAD Inventor :: Change The Down 90 To Bend FarSide 90?
Dec 2, 2013Using Inventor 2012 is it possible to change the down 90 to Bend FarSide 90?
View 4 Replies
ADVERTISEMENT
AutoCAD Inventor :: How To Change Radius On A Bend
Oct 21, 2011I have been trying to bend a larger radius on a corner bend but i can not seem to be able to . I start out with a face of 46" x 82" i want to put a 1/2" bend up then a 1/2" bend out to make a z shape i'm using as a material .109 stainless steel and i want to end up with a 1/2" on the inside corners so that when i'm done i can flatten it out to get the proper sheer size for the piece the metal brake i'm using has a 1/2" die in thats why i trying to figure this out is their any way to put this kind of radius on the sheet metal bends.
View 2 Replies View RelatedAutoCAD Inventor :: Change Sheet Metal Parts Material / Thickness Bend Radii From Assembly
Nov 22, 2013How do we change sheet metal parts material, thickness Bend Radii from an assembly in groups.
View 3 Replies View RelatedAutoCAD Inventor :: Cut Across Bend Feature
Dec 27, 2013I'm trying to use the cut across bend feature on a sheet metal part. However, when I check cut across bend, it grays out all of the other cutout options, and only has thickness as the only option. This is perplexing to me, because I can't think of too many times I'd need this option other than when there is more than one thickness of material I need to manipulate the profile onto.
I was to understand that this "cut across bend" is for use similar to the "normal cutout" command in solid edge? Keeps the cut perpendicular to the sheet face in a sheet metal part.
Cybertron PC
Intel Core i5-3470 CPU @ 3.20 GHz 3.60 GHz
16.0 GB RAM
Windows 7 Professional 64 Bit
3D Connexion Space Pilot
Inventor Professional 2014
Autocad Mechanical 2014
AutoCAD Inventor :: Can't Dimension A Bend
Jun 7, 2013I attached an IPT file that a customer sent us to manufacture for them.It's a rectangular aluminum tube with two bends.In the IDW when I try to place center points and dimension the radius it is not recognized.The original file was a STEP.
View 9 Replies View RelatedAutoCAD Inventor :: Is There A Way To Bend At Assembly
Feb 14, 2012Under the modify tab in a part file, I can drop down and click "bend part." We have a bunch of frames made out of stock tubing that are welded together, then bent as a whole. Is there a way to bend at the assembly? I want the model to represent the production process. I don't want to have to bend each tube alone, then reassemble. That would double my parts/part numbers.
View 9 Replies View RelatedAutoCAD Inventor :: Cut Across Bend Around A Rolled Tube
Feb 14, 2012I'm trying to do a usable and real flat pattern for a laser cut on this type of part and I'm not able to do a cut across bend or other wrap around face feature.
Any method to do such a feature ?
AutoCAD Inventor :: Bend A Cylinder At Several Places
Dec 27, 2012I want to do a simple bend of a cylinder. That is, I have made a 40inch length and want to bend it at several places.
I keep finding a reference to bend part but the tool does not exist in Inventor.
AutoCAD Inventor :: Retrieve A Bend From Sweep?
Oct 4, 2012I have created a pipe using sweep through 2 planes and 3d sketch. I want a specific bend on that pipe to be extracted for drawing purpose. How do I do that ?
View 9 Replies View RelatedAutoCAD Inventor :: How To Perform Bend In Flat Bar
Feb 21, 2012If i have even used the correct technique but how do i perform the bends in the flat bar so as the bottom and top section are vertical and the small mid section is on the angle. At the moment the mid section is displayed vertical when using the cub please see attached files.
View 4 Replies View RelatedAutoCAD Inventor :: Bend Extents Not Visible
Oct 21, 2013I have unfolded a 3D model into a flat plate, however the bend lines/extents do not appear in ISO.dwg
I doubled clicked into the view to access 'Display Options'. However, I cannot tick the box to display bend extents as this option is shaded out (refer to attached screen dump).
AutoCAD Inventor :: Dual Dimension A Bend
Apr 11, 2013I cannot figure out how to dual dimension a bend like so:
DIRECTION DEGREES RIMPERIAL [RMETRIC]
e.g. DOWN 90 R1/2"[13] preferred
or DOWN 90 R1/2"[R13] okay
There should be a degree symbol after the 90 in my examples but I can't figure out how to type it here. I can get DOWN 90 R1/2"[DOWN 90 R13] but it's too long.
AutoCAD Inventor :: Bend Notes On Drawing
Aug 13, 2012Is there a way to make Inventor automatically add a note, along the bend line, indicating bend direction, number of degrees and bend radius?
Also, in 2013, where are the bend tables located? I've checked the help file, and it's telling me cprogram filesautodeskinventor 2013design data
I followed that path, but I do not have the "design data" folder it's calling for.
AutoCAD Inventor :: Cannot Mirror A Bend In 2014
Jun 22, 2013Inventor 2014 LT / have run into a problem in a throw-away project I"m working on.
A simple example is to create a piece of 3x5x.125 flat bar, add a sketch giving you a bend line and bend the end of it. Now try to mirror the whole thing giving you a 3x10x.125 flat bar bent on both ends.
FWIW: My project isn't this simple - I know I can just make the FB and bend both ends ... this is an example of mirroring a bend not working.
AutoCAD Inventor :: Save DXF Without Bend Lines
Dec 31, 2011I am trying to save copy as dxf without bendlines so I can directly import the file into my waterject CAM software. There has to be a way to tell it not to add the benline layer.
View 7 Replies View RelatedAutoCAD Inventor :: Sheet Metal - Cut Across Bend
Dec 20, 2012I have a sheet metal door with a little bracket that gets welded to the inside lip through a cut-out in the face of the door. (see assembly)
I can't get the cut-out to line up flush with the inside lip of the door, as that is where the brackets gets welded to. the current aseembly is set-up the way I want, but I can't get a flat pattern on the door, becasue of the cut going across the bend.
I have checked off the "cut across bend" in the cut dialogue box, but this leaves a small (~1/32) lip in the cut-out and runs interference in the placement of the bracket.
Inventor Pro Suite 2013
Sean Farr
Product Designer at TESInc.ca
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
AutoCAD Inventor :: Bend Along Non-planar Surface?
Dec 26, 2013I am not sure what I am doing wrong but when I use the bend tool I am getting weird results. Does the surface to be bent have to be planar? See photo attachment.
View 4 Replies View RelatedAutoCAD Inventor :: Why Can't Move Bend Tags
May 13, 2011Create a new sheet metal part make it a box of any size add four flanges then create a flat pattern. Save the file then create a drawing view of the flat pattern. All well and good so far... Now create a Table using the flat pattern view as the source, which creates a Bend table just fine.
Place the table on the sheet and Tags are added to the bend lines which is wonderful and great. Now try to move a tag.... BZZZZZZ your time is up you can't.
Yet in your Sheet Metal Annotations in Drawing - Wiki Help page in the Procedures - Create or edit a bend table - Create bend tags section it states:
Tip Drag the bend tag text away from the original position to add a leader to the bend tag. Is this a bug or something not set right on my system?
Manufacturer: Dell
Model: Precision T3500
Video Card: NVIDIA Quadro FX 3700
Video Driver: 8.17.12.6779
Processor: Intel® Xeon® CPU
W3503 @ 2.40GHz 2.40 GHz
Installed memory (RAM): 4.00 GB
System type: 64-bit Operating System
AutoCAD Inventor :: Bend Order Annotation With VBA?
Nov 3, 2011How do i get the bend order annotation # with vba?
View 1 Replies View RelatedAutoCAD Inventor :: How To Find Length Of A Bend
Oct 6, 2011I have some code that find the length of a bend and it works great until there is a cut operation that passes through the edge of the part and through the bend. When this cut exists the systems recognizes the single bend 2 times which is fineand it should, just that it should also then be able to determine the length of each segment. It appears to be providing the length of the first segment twice. Any way to get either the segmented lengths or the length of the bend without the cut? I need a total length and the code below gives wrong data for the one edge length. the attached file shows what I mean.
Sub Bends()
Dim oDoc As PartDocument
Set oDoc = ThisApplication.ActiveDocument
[Code]....
AutoCAD Inventor :: How To Cut Across Bend In The Attached Part
Oct 31, 2011I'm trying to cut across bend in the attached part. Usually this thing works quite good, but for some reason it's not letting me do it. What Am I doing wrong? How can I do it?
Inventor 2012 Pro.
I7 workstation
AutoCAD Inventor :: Bend 15 Degree At 800 Mm From Bottom
Dec 6, 2012I want to make this part that bend 15 degree at 800 mm from bottom. In my attempt.
First, I bend it 15 degree.
And, make flange from Face and upper flange then I stuck with error.
AutoCAD Inventor :: Any Way To Preload Info - Bend Radius
Feb 27, 2012Is there a way to preload information into Inventor in regards to the break press such as the dies being used or the ones available so the when the computer is deciding a bending radius,it know what tool we have?
Currently the bend radius is set to "radius", which i am assuming is default, but I can't figure out how to change that either, and depending on the thickness it will change, but like today it said I would need a 1/16th inch radius, but we don't have a 1/16th inch die,it is an 85 degree air bending setup,and has a 4 way die with smaller and bigger openings.
AutoCAD Inventor :: Edge Bend For Flat Pattern
Jul 31, 2013Any way of drawing an edge bend on a flat bit of copper so I can flat pattern it for the guys on the shop floor to make.
The problem comes with the edge bend, I have provided a picture of a simple bit of copper with various flat bends and a single edge bend. As the flat pattern shows to the right the edge bend is not flattered, This was drawn using a sketch the profile then using "face" . This is why I assume it does not work in flat pattern.
Is it possible to draw an edge bend with a command to allow it to flat pattern? if so which command and how?
autodesk 2012
Windows 7.
AutoCAD Inventor :: Bend Messing Up Rotational Relationship
Oct 1, 2013I dont know why, because I never had this problem before, but I am bending an object and the bend command is distorting the circle I made as a pivot point.
View 1 Replies View RelatedAutoCAD Inventor :: Lofted Flange Extra Bend?
Nov 22, 2013I have tried to do a lofted flange. It works, but there is an extra bend that I don't understand why it is there. The bends, I would assume, should be symmetrical but they are not. I have attached the part.
View 5 Replies View RelatedAutoCAD Inventor :: Bend Line Projection On A Sketch
Feb 4, 2013Just by selecting a bend line on the flat pattern, I'd like to draw only 2 lines on a sketch (without any border projection, only points) at both ends of the bend line.
I'm sure it can be done via VBA, but don't know how to start for it.
AutoCAD Inventor :: Sheet Metal Shape - Cut Across Bend
Jan 16, 2012I want to create this shape, I try to use the loft command to get the result but after I get the shape I can't do the shape on the top of the loft shape, I need to do the cut across bend. show the correct step to get this shape? Attach is the .jpg file of the part.
View 4 Replies View RelatedAutoCAD Inventor :: Bend (fillet) Between Two Lines In 3DSketch
Sep 15, 2013I generate 3 points, two lines between point 1,2 and 2,3 and make a bend between the two lines. Cannot do it correctly.
On one side the fillet is not trimmed correctly. I think it is a bug in Inventor. Also when I have the sketch I manually cannot make a decent bend/fillet in the 3D sketch I created.
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click 'add 3d sketchpoints in open partdoc Dim oPartDoc As PartDocument Dim oPartDef As PartComponentDefinition Dim oTG As TransientGeometry oTG = _invApp.TransientGeometry oPartDoc = _invApp.ActiveDocument oPartDef = oPartDoc.ComponentDefinition Dim oSketch As Sketch3D oSketch = oPartDef.Sketches3D.Add() Dim sp1(2) As SketchPoint3D Dim rod(1) As SketchLine3D sp1(0) = oSketch.SketchPoints3D.Add(oTG.CreatePoint(0, 0, 10)) sp1(1) = oSketch.SketchPoints3D.Add(oTG.CreatePoint(0, 0, 0)) sp1(2) = oSketch.SketchPoints3D.Add(oTG.CreatePoint(10, 0, 0)) rod(0) = oSketch.SketchLines3D().AddByTwoPoints(sp1(0).Geometry, sp1(1).Geometry) rod(1) = oSketch.SketchLines3D().AddByTwoPoints(sp1(1).Geometry, sp1(2).Geometry) 'bending it oSketch.SketchArcs3D.AddAsBend(rod(0), rod(1), 2.5) End Sub
The resulting part-file is added, for who wants to try to get a bend with both sides trimmed correctly.
AutoCAD Inventor :: Bend Lines In Export Face
Feb 8, 2012When I use "export face as" to create a DXF file for our lazer table I loose the bend lines in the DXF. Is there a way to retain the lines in order to have the lazer scribe the bend lines for us?
View 4 Replies View RelatedAutoCAD Inventor :: How To Combine Bend And Flange In Animation
Oct 18, 2013how I can combine the bend function & flange in an animation. The problem is that I'm unable to use flange when the plate is nearly 98% flat (which I need to remain the radius for favorite parameters - bend function).
View 9 Replies View Related
