Is it possible to persist a custom object within CAD at a per drawing level? Basically we want to create a web service that pulls in a project name / project number etc etc from our project management software and persist this to the cad drawing itself so it is available when reopened?
View 5 RepliesI am working on Data compliation and trying to extract data from multiple AutoCAD drawings. The data extraction wizard works well and extracts all the data from the drawing. I wish to segregate the data and want some certain set of data e.g. in P&ID drawing, I need only instrument Tags which are connected to DCS and likewise...
Is there any way to filter such kind of data and get the required results?
I have some files (OK, 11,000 of them) and they have drawings on the bottom and text on the top. I want to erase this text and replace it with data that comes from a database. I don't know where to start.
I need to:
1. preferably find a way to erase the old data on the top, but I could do it manually
2. Insert data from specific fields into specific spots on the drawings.
3. Each drawing would have the same fields but different data corresponding to an account number. The account number is included in the name of the drawing and is a field in the database.
How to get started? I have Map3D as well, which I was told would work better than regular AutoCAD on this, but I also have regular AutoCAD. I can't even figure out how to make the database connection work.
When I insert a drawing from ACAD into an Inventor sketch I get the geometry I want but also allot of points or blocks are inserted also that are not in the original ACAD drawing at all. I cant pick these points to delete them even though they highlight when picked.......
View 2 Replies View RelatedI have drawings which are occasionally transmitted to vendors, building officials and other parties. These drawings contain XREFs for the floor plans, roof plans, site plans, etc. Some of these XREFs contain layers with sensitive information the client does not want distributed to third parties.
If I'm just sending a PDF or plotting locally the sensitive layers are turned off or frozen and the PDF is plotted without layers. This is sufficient to protect the sensitive data. But if the third party requests a CAD file then I have a problem.
If I use Send to create a package of dependent files including XREFs they are included whole with all of the sensitive data on frozen layers.
If I Bind the XREF to a copy of the drawing for distribution the sensitive layers are still included as frozen layers.
In either case I am confronted with the task of deleting a large number of layers and we all know what a chore deleting layers with content can be. There has to be a solution to this problem, either an easier way to delete layers or a way to filter them in the binding process. Currently I am removing the XREF and making a block of the essential layers each time I have to make a distribution but these are large and complex drawings making this a chore as well.
Arguably this would be much simpler if AutoCAD had a better method for removing layers such as offering to a. move all contents to layer 0, b. delete all layer contents or c. cancel instead of just telling me I can't delete the layer because there are contents like we're still using R12.
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
Whenever I open a drawing in a certain project this error message always pops up.Some of the message details are:
-Parameter ERRCODE; Value 786433
-Error 786433 - Conflict between data tables in open drawings (57 consecutive occurrences)
-Parameter: APPLNAME Value: ad
-Parameter: CLASSNAME Value: airfield
this message box stops popping up when I open the drawings?
I'm using ACAD LT 2008.
When i try to copy paste some drawing entities from a heavy drawing file to any other file, the program blocks and says 'not responding', endlessly. So i always have to shutdown the program. I experience the same problem using the designcenter: when I try to copy a layout into another drawing, my computer gets stuck.
Another annoying problem with these files is that they are so heavy, while in fact they shouldn't be. I tried the aectoacad file command. In result the file id half as big, but after I open it and save it, again is the original size.
Every now and then I go back and try to use publish to speed up printing but I always go back to plotting one by one.
I work in a housing construction office and I have 10 separate drawings side by side in model space for house plans that I need plot separate to give to certain people. My problem isn't that I can't publish them separately its that I can't save them over existing pdf's individually predetermined.
Q1. do i just have to go through and change every layout name before or after i publish?
Q2. how do i change the output publish location?
Q3. can each layout be saved to a different existing pdf and remember it?
Q3. can i save these setting across to a new drawing?
I have a master shape file that contains parcel ID, owner, tax info., etc. I have another file ( access 2003 -open to better file format suggestions-) which contains parcel ID and a "yes" or " no" entry for whether or not the parcel needs a new water meter. All I want to do is add the water meter information into the other shape file. This would create one shape file with one table with all the information that I need.
Ultimately I will use the information to do a map query and find out spatially where i need new water meters.
Right now i have the master shape file connected though the “Connect to Data” feature. I also have the new data added to the drawing though the Data sources------>attach under the “Map Explorer” Task pane. I attached access file (ver. 2003 .mdb) which has two columns “Parcel ID” and “Meter”.
I right click on the shape file under the display manager and select”Create a Join;” however my water meter table is not listed as an option. Will this not work?
Plan B - I tried to Create and connect to the access file as an ODBC connection. Followed this guy’s directions to a T [URL]. But when i populate my table under the fdo connection the column headings exist ( “parcel ID” and “Meter”) but the actual data is missing. Am I missing something important?
Note: I am running c3d 2012 on a Win 7 64 Bit machine. I also removed office 32 bit apps and installed 64 bit apps to see if that would solve the problem. No go.
say you make some parcels in your project with custom data fields like: id_no, permit_no, acres_served etc. you attach an agency provided shape file via an fdo connection that has many fields of information like above.
when you right click on your parcel and do parcel properties you get a tab that lets you input the custom parcel data.
lets say you print an fdo map label showing, say, the id_no, provided in the shape file. Then in your custom parcel properties for id_no you type that in.
is there a way to make an expression to put in the other custom parcel properties that will read, say, the permit_no(id_no) from the fdo like and put that information in the custom parcel property field?
I'm having problems getting super elevation data to transfer to different drawings by means of an alignment data shortcut. I know alignments hold the super elevation data so I've gone into my alignments data shortcut, input my super elevation data, saved and closed. Now when I open my finished grade drawing, reference in my alignment and profiles, then create a corridor from that information, my super elevation didn't transfer with the reference.
I pulled cross sections and it appears is has no clue there is any super elevation data. Also, I tried bringing it directly into the drawing I'm doing my corridors in and it erred saying I must be in the parent alignment drawing. Data shortcuts are pretty much useless to me if super elevation data doesn't transfer.
64 bit Windows 7
Intel Xeon (R) @2.8GHz
6.00GB Ram
Civil 3D 2012
Civil 3D 2012
Intel(R) Xeon W3530 @ 2.80GHz
6.00GB Ram
Windows 7 Professional
I am trying to link my extracted data from blocks with attributes to an extenal source so that the table I create and place into the drawing already has the formulas I need to due the required calculations. But every time I create and place the table the formulas are not in the table. I include the columes that contain the data but it doesn't seem to be working.
View 2 Replies View Relatedi have created a data band in profile view that should show a created profiles elevation, but some of the the data fields are missing irregulary. Also in the data band that shoud show the diferenece betven the tow profiles - EG and the new profile the data is missing. The EG profiles data and the surface are ok all is shown.
View 4 Replies View RelatedI've just installed Civil3D, 64-bit on windows 7(running on bootcamp) and am trying to insert a georeferenced raster image but have encountered some issues.
1. "Home tab>>Data panel>>>insert An Image" - The data panel is missing and it's also not found in "customize palettes"
2. Trying the data connect route does not work either: Display manager>>>Data>>>Connect To Data - There is no 'Data' option and I cannot connect to Data.
Is it possible to embedd data in a table so that a user can select from a group of data within one cell?
I use this technique quite often in Excel. One cell in a table can have various values: A, B, C, or D. While another cell can have a different set of values to choose from: BLUE, RED, ORANGE, or PURPLE. The user can pull down an arrow (similar to a dynamic block) and choose from a set list of values.
I know that the xmls are very important in the design data folder and we shouldn't mess with them.What about the rest of the folders. I have around 11 folders. GOST, AEC Exchange, AIT, Cable & Harness, Bend Tables, DWG-DXF etc...
I need to know if any of these folders can be deleted? We don't use AEC Exchange, Cable Harness, BIm Exchange, Design Accelerator, Tube & Pipe.
What about the Optimisation, DXF-DWG. I am not sure if I am using them unknowingly.Does this could be deleted? Is there a procedure to get rid of them.
how to import point data that has Map Object Data also attached to it? "import it by attaching to a data source".
Example: I have a bunch of manholes. Each MH has X,Y,Z, but also Type, Invert Elevs., Pipe Sizes, Pipe Materials, Pipe Directions, Structure Type/Material, etc. etc. etc. I may have point data representing MH's, airport runway ends, trees, anything you can imagine, with all kinds of data imaginable.
I want to import this data directly into Autocad/Civil 3D as either Autocad points, lines, or closed polylines (I also have utility lines, parking lots, etc.- all with data associated with it), all with the data attached as object data. I know that anything more complex than points might be hard to explain here, so I am hoping at least for a solution on how to import points - I have 99,999 MH's and obviously I don't want to have to type all that data in one by one.
I basically suck at using sql server. I can get around using the Map workspace and the different tabs. I have never used FDO, and I am not even sure what it is.
I fooled it today by creating 99,999 Autocad points at the correct XYZ, attaching the correct object data to them, then exporting as a shp file. I went into the shp_name.dbf file and edited it to add the data I wanted by cutting & pasting from Excel. then I re-imported the shp file. but, this is a workaround at best.
Surely Map can import objects and their associated data fields, all populated with valid data! all I need is to know how to do it. I mean, if this is not something I can do directly using Map commands should I take the money I earned by surveying 99,999 MH's with my GIS data collector that allows me to assign 101data fields to each object I survey, and buy something better?
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
Is it possible to add data to a feature data table? Example: The shape file data downloaded from NRCS only has the Soil number for the State. As I check out features I would like to add data for the soil name, soil group, etc. as additional columns in the data table and have it available in the future by checking the feature back in to my local information.
View 2 Replies View RelatedI have a drawing with Objects that have both Object Data and Linked data in an Access database. I need to get information from the linked table to a new linked table for each object.
I have thought that if I get the necessary information from the Linked table record to the object data for each object, I could then convert the Object data to a new link and am looking for a way to copy the data from a field in the Linked Table to the object data. There is at least one field common to both the OD and Linked Table record.
Is there any automated way to transfer this data?
In my company, they have just upgraded the old version of Autocad LT 2004 to the new 2013 and we have created menu to make our job easy. I have try to transfer the menu file .mnc to 2013 but it's not working or I don't do it the right way.
View 4 Replies View RelatedI'm working in AutoCAD Map 3D 2008 and Autocad Civil 3D 2009.
The General Task:I want to convert the object data to attribute data so that I can export it to an Excel file, add another column of data, and then import that new data as attribute data.
The Specific Task:I have thousands of campus water meter locations (a block with a small icon, attribute data, and object data) that belong to two different systems, domestic water and lake water. Each of these blocks has object data item (a barcode tag) that I want to show as a label next to the block.
However, before I do that, I want to export that barcode data to an excel file so I add a column (eventually a new piece of attribute data) that says whether or not that specific water meter is radio read or manually read. I want to then import that radio read/manual read excel file back into autocad and have an X appear on the block icon if it is radio read. I also want the barcode information to show up as a label.
My problem:I can't get the barcode object data to export with the locations in one easy excel sheet that I can simply import after I have made my changes.
Find some person on here who knows how to convert object data to attribute data.
I have a table setup in Autocad map and am entering attribute data for the objects (Polygons). I have received a new dataset which I imported as points into the drawings which sit inside in the polygons. The points imported include one attribute data field that I want to get into my table.
In practical terms I am entering data re building heights, received a lidar file with point data relating to the building height.
I am working on parsing the psd file and saving the data as per doc of photoshop 6. I need to make an image from the layer data alone with different combinations of layers selected, visible etc... and not using the merged data section in the file.
View 1 Replies View RelatedWithout using scripts, is there any way to have rectangles or textboxes act on values coming from a data file? For examplle if the value in a textbox was greater than 10 coming from a data record, could the textbox change color, or any other attribute to make it change from record to recortd as it is being viewed or printed?
View 9 Replies View RelatedI'm creating a catalog, using data merge in InDesign CS5.5 for the first time. I'm using dummy data to start, naming the products with a naming convention Product 1, Product 2, etc.
Everything seemed to be working, but then I noticed that the merge is all jumbled, such as:
Page 1 has Product 15 repeated, with the product description, price and other information from product 6. This repeats five times down the first page.Page 2 starts with Product name, price and number for Product 7, but the description for product 6. Continuing on page 2, everything seems one off. Product names mixed with data from the next product. Page 3-15 are the same as page 1, all Product 15 with the description for Product 6.
In short, this is very weird. I am saving the data in a CSV comma deliminated (also tried text with tab delineations.) I don't think there are any text breaks in the data, nor blanks. The odd thing is also that the preview looks perfect before I merge the document.
Here's Page 1:
Here's page 2:
By the way, all numbers (except pupil price) relay the product number. For example, Product 1 has a price of $1.00, an item number of H1, and the description "This is product 1".
The gps data from my D-SLR camera does not appear in Lightroom 4 after importing the pictures
View 1 Replies View RelatedI have a CAD Drawing in 2010 format. I printed the same drawing from two different types of printer. One from HP Officejet K7108 printer and another from HP Officejet 7000 Wide Format Printer - E809a. But the scale of both drawings are not same.
View 9 Replies View RelatedI am having a problem with Autocad12 I am using at a friends office: we both can open, edit, and save the same drawing. This is a real problem as you can imagine. We are running Windows 7 and are using DROPBOX for file storage. DWL are being created but for some reason they are not being used. On the otherhand if I try to open a file I created I do actually get locked out - just not from the other computer.
Just did a test - when I log in directly to the hard drive instead of the network it locks me out if I attempt to load it. If I login through DROPBOX it does not.
how I can have autocad recognize the lock files in DROPBOX folders?
Im using AutoCAD 2012 and am trying to publish a set of drawings to PDF but when i do it cuts off some of my title block, but when I plot to PDF the drawing is fine.
View 1 Replies View RelatedI am new to autocad, i wanted to know if i can convert 2d drawings to 3d ?. I work in the aluminum openings industry making doors and windows, i have all my aluminum profiles drawing in 2d.dwg and i want to convert it to a 3d model and then extrude it for a certain length so that it look like an aluminum profiles bars ?
View 7 Replies View RelatedI draw several different drawings in the same dwg file - just offset from each other in the XY-plane.
I want to bring these together on top of each other to form the complete picture, but I'm not sure how to accomplish this in an easy way. If it was a one time thing I would just use the Move command, but the goal is also for the combined picture to be updated as the separate drawings are changed - not realtime - but maybe in some x-ref kinda way.
The whole thing would be easy if the separate drawings were also separate files, but as they are not I'm not sure how to solve it...