AutoCAD Inventor :: Split Face In Weldment?
Sep 19, 2013
I'm trying to model plug welds in IV2014. I've read all the posts here that say that I need to split the hole faces. Problem is, the split face command doesn't seem to appear in weldments. I want to make the holes to be plugged as a weld preparation. Am I just missing something here, or is IV so backward that a common weld can only be achieved when not working with a weldment?
Inventor Pro 2014 SP1
HP Z400 Workstation
Intel Xeon W3565 @ 3.20GHz
12Gb RAM
Win 7 64 Pro SP1
Spacepilot Pro v3.17.4
View 1 Replies
ADVERTISEMENT
Jan 29, 2013
I was wondering if there is a way to change the appearance of a face in a weldment assembly environment. I have a weldment which in the machining process a part of weld bead as well as a portion of one of the components is machined down (spot faced) and I need to change the appearance of those face to polished, but it doesn't let me do that?
View 3 Replies
View Related
Dec 16, 2013
I am attempting to split a face so I have a good area to apply a load in simulation and 3/4 of the areas split just fine but I CANNOT get the 4th area to split! This is all just projected geometry but left and right are symmetrical so I can't figure out why the L side works but not the R side.
View 2 Replies
View Related
Oct 3, 2012
I use the split face tool on my ipt. When i create a idw of this part I want to show the split face line in the drawing. When I initially place the view the line is shown, however when the place view command is finished the line is not shown.
I see nothing obvious in the place view dialog box controlling the visibility of this line............how do i show this line in the view?
Inventor 2012, windows xp
Inventor 2010 Certified Professional
View 1 Replies
View Related
Jan 15, 2013
Say I draw a mesh sphere and I do the Split Mesh Face. Why am I fail to select the mesh face to split? It only allows me to pick the lines.
View 1 Replies
View Related
Oct 12, 2013
I tried the tool Splite Face use a curved wall,But only on straight surface is activated.
View 2 Replies
View Related
Oct 27, 2009
Is there a way to hide the lines between areas created via the split face tool? If not, my end goal is to have an area on a surface appear a different color than the surrounding area, with no lines between. The surface is the face of an extrusion in an in-place family.
Revit 2009
View 3 Replies
View Related
Sep 20, 2012
the situtation is splitting a floor face in the exiting phase to "paint" the floor tile pattern in the existing restrooms and then removing that once in the new phase and resplitting to "paint" the new pattern...
is it possible to split a floor face in existing phase, paint it, then move to new face and un-split and paint it to create a new split and new paint?
View 1 Replies
View Related
May 31, 2013
I have a medium sized assembly that I was working with. I decided I needed to create a weldment, so I stripped the assembly of all subassemblies, individual parts, etc and saved it as a different name. However, Inventor will not allow me to convert it to a weldment. That optoin is greyed out.
The only thing I can think of is I have a base part that I have hidden. It is used to drive the assembly. Perhaps that is causing a problem, but I cannot remove it or all associativity will be lost. I deleted it temporarily to try, but did not save it. The convert to weldment option did not appear after I deleted it.
View 5 Replies
View Related
Aug 28, 2013
I just was upgraded to Inventor 2014. I've got an assembly that I want to convert into a weldment. The "Convert to Weldment" icon doesn't appear where it used to be in 2013. I cannot find a way to make it pop up. Is it no longer possible to use this button to convert a an assembly into a weldment?
View 5 Replies
View Related
Jun 28, 2013
I started my project, the design is basically a bulkhead chassis design with multiple access panels on all 3 sides. I wanted all of the hole patterns on this assembly to be based on one sketch. So I created a base part inside the assembly, this part compiled of sketches and the sketches compiled of construct lines and points (for panel and chassis fastener hole patterns). This was going great, after learning a couple tricks.
Manufactuing had determined that I need to machine the holes on the chassis after welding. Which means I need to move the adaptive features, from the part files, to the assembly file.
So here is my problem, assembly sketchs are not adaptable? Either projecting to (from that base part file), or projecting from (from the assembly sketch to the part file). I tried both. How I should model this? How do I make weldment machining adaptive?
View 2 Replies
View Related
Mar 25, 2013
In past I replaced components in Assemblies with this sub:
Sub testReplacePartInAss()
Call ReplacePartInAss("W:INVENTORTPart1.ipt", "W:INVENTORTPart2.ipt")
End Sub
[Code] .....
But if the assembly is a weldment assembly the line
If oOcc.ReferencedDocumentDescriptor.FullDocumentName = sInAssFilename Then
creates an error '91' that the object is not set.
What has to be changed in this code so that it will work with 'normal' assemblies AND weldment Assemblies too.
View 3 Replies
View Related
Oct 27, 2013
Is it possible to change a normal assembly into a weldment assembly through iLogic?
View 4 Replies
View Related
Apr 24, 2012
Open the attached file 207665-124.ipt. how their is only one Solid Body, but the iam needs to be updated because the user added one more part to the assembly. As soon as it updates now instead of one Solid Body I have 2. I don't want 2 and this is not typical. Even if I derive the 207665-120 into a brand new part file, it is only one body. What is causing this to seperate into 2 bodies? I tried to re-create this from scratch and can't, but he has several files like this that need updates and the 2 bodies causes problems with the holes.
View 1 Replies
View Related
Oct 7, 2011
(Inventor 2012) I have a weldment. I can make holes and save, I can make revolved cuts and save. I can make chamfers and/or fillets and save. But if I try to extrude a cut (any cut), I receive an error.
Problems encountered while saving the document.
Error(s) detected while writing segment AmBREPSegment in database C:lah-blah.iam
Error detected while saving object of type MIxTransactablePartition in C:lah-blah.iam
Error detected while saving object of type MIxPartition in C:lah-blah.iam
The attempted write operation did not succeed. Part file may be corrupt.The database in C:lah-blah.iam could not be saved...
View 1 Replies
View Related
Dec 6, 2013
I cannot find the Convert to Weldment in the 2014.
View 3 Replies
View Related
Apr 22, 2013
Is it possible to export a weldment and include the weld volumes? I'm attempting to export to an .stl file and the welds are missing in the resultant file. (Or am I doing something wrong?) The weldment was converted from a standard assembly file, but the BoM structure was set to Normal, not Inseparable.
View 9 Replies
View Related
Apr 3, 2013
I have a weldment which includes a sheet metal part called sPart. I want to show a detail of the flat pattern of sPart on the weldment drawing and still be able to balloon the flat as the part of the weldment. So I clicked to add base view and selected sPart from the Preparation dropdown list under the Model State tab of the Drawing View dialog box. The problem is I cannot find an option for using the parts flat pattern.
View 6 Replies
View Related
May 27, 2012
My design consists of two steel rails that are welded together on top of a guardrail system. To allow the weld to be added between the steel rails I have converted my assembly file to a weldment.
My question is now I have this converted assembly with it's weld in the design can this still be used to perform stress analysis on ? I am not sure the need for assembly to be converted to allow a weld to be added.
View 2 Replies
View Related
Oct 15, 2012
There is any option to merge bottom face of pad eye and pipe curved face... Something like
1. Extrude face to a surface or
2. like notch option available in frame generator ?
N:B - pad eye is made by extrusion and pipe made by frame generator.
View 2 Replies
View Related
Oct 5, 2011
What might cause some parts to retain there weld prep chamfers in the part file & other parts don't show the chamfers except in the assembly like an assembly feature?
I noticed that when parts were in a pattern & Weld Prep/chamfered, they retained the chamfer feature in the part.
View 2 Replies
View Related
Jan 24, 2013
I'm really struggling with constraining a weldment assembly. I've attached a JPG of the Assembly but I cant get the constrains to go where I want them.
Basically this assembly is a wheel with three equally spaced stays welded to a large nut hub. I have constrained the center axis of the wheel to the center axis of the Nut so the wheel and nut will remain aligned.
What I'm struggling with is constraining the three stays to the wheel and to the nut equally spaced around the nut.
View 7 Replies
View Related
Aug 22, 2012
All I need to do is merge a circular face to a flat face, so both faces become one continuous face. Is this possible at all?
I have a attached a screenshot to show what I mean. Face 1 needs to be merged with face 2. This is so if I constrain anything to that face it will constrain to the entire face and not either the circular face OR the flat face.
View 3 Replies
View Related
Aug 27, 2012
I have this odd problem that when i want to do welds on a assembly, the machinng (holes) disappear. So i cannot put welding between a pipe and a hole made in a weldment.!
View 9 Replies
View Related
Jun 6, 2012
I am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies
View Related
Mar 25, 2012
I have a very large assembly drawing. The BOM is three times the height of my D size format. How do you split the BOM to break it into 2 or 3 columns instead of one large one that does not fit on the paper?
View 6 Replies
View Related
Nov 7, 2013
I have a part I have drawn in inventor. It is saved as an ".ipt" file.
I would like to split this part into two seperate Ipt files so i can assemble it a different way.
For example,
the part i wish to design is an alternate keying of the one i just drew-
meaning that a solid of the part is rotated 60 degrees in this case.
Is it possible to do this with inventor commands?
View 4 Replies
View Related
Apr 9, 2012
I modified a box build in Inventor in Fusion and then imported it back into Inventor as a bowl. I am trying to split the bowl in half and create an assembly drawing which I can submit. When I try to split the bowl I get and error message: "The attempted operation did not successfully complete due to unforseen problems. Try with different inputs or outputs." I've attached the file in case you want to try yourself.
View 2 Replies
View Related
Jun 26, 2012
I want to apply a pressure load on portion of a surface in my INVENTOR solid model. My problem is that i cannot split the surface in inventor easily. I did it my creating a separate surface with an offset that i reduced to almost zero.
View 4 Replies
View Related
Sep 2, 2013
I made all my polygons with the same technique but somehow interactive polygon split tool does not split all polygons... I attached a file with which I have problem. Split tool just "disappears" after submitting changes...
View 1 Replies
View Related
Oct 11, 2011
I 'd like to keep the old Revision table rows available , but off the sheet rather than delete all the rows & start from , let's say, Rev 10.Is this possible in 2012?
Inventor Suite 2013 Ultimate
View 6 Replies
View Related
