AutoCAD Inventor :: Unable To Save After Extruding Cut In Weldment
Oct 7, 2011
(Inventor 2012) I have a weldment. I can make holes and save, I can make revolved cuts and save. I can make chamfers and/or fillets and save. But if I try to extrude a cut (any cut), I receive an error.
Problems encountered while saving the document.
Error(s) detected while writing segment AmBREPSegment in database C:lah-blah.iam
Error detected while saving object of type MIxTransactablePartition in C:lah-blah.iam
Error detected while saving object of type MIxPartition in C:lah-blah.iam
The attempted write operation did not succeed. Part file may be corrupt.The database in C:lah-blah.iam could not be saved...
View 1 Replies
ADVERTISEMENT
May 31, 2013
I have a medium sized assembly that I was working with. I decided I needed to create a weldment, so I stripped the assembly of all subassemblies, individual parts, etc and saved it as a different name. However, Inventor will not allow me to convert it to a weldment. That optoin is greyed out.
The only thing I can think of is I have a base part that I have hidden. It is used to drive the assembly. Perhaps that is causing a problem, but I cannot remove it or all associativity will be lost. I deleted it temporarily to try, but did not save it. The convert to weldment option did not appear after I deleted it.
View 5 Replies
View Related
Sep 19, 2013
I'm trying to model plug welds in IV2014. I've read all the posts here that say that I need to split the hole faces. Problem is, the split face command doesn't seem to appear in weldments. I want to make the holes to be plugged as a weld preparation. Am I just missing something here, or is IV so backward that a common weld can only be achieved when not working with a weldment?
Inventor Pro 2014 SP1
HP Z400 Workstation
Intel Xeon W3565 @ 3.20GHz
12Gb RAM
Win 7 64 Pro SP1
Spacepilot Pro v3.17.4
View 1 Replies
View Related
Aug 28, 2013
I just was upgraded to Inventor 2014. I've got an assembly that I want to convert into a weldment. The "Convert to Weldment" icon doesn't appear where it used to be in 2013. I cannot find a way to make it pop up. Is it no longer possible to use this button to convert a an assembly into a weldment?
View 5 Replies
View Related
Jun 28, 2013
I started my project, the design is basically a bulkhead chassis design with multiple access panels on all 3 sides. I wanted all of the hole patterns on this assembly to be based on one sketch. So I created a base part inside the assembly, this part compiled of sketches and the sketches compiled of construct lines and points (for panel and chassis fastener hole patterns). This was going great, after learning a couple tricks.
Manufactuing had determined that I need to machine the holes on the chassis after welding. Which means I need to move the adaptive features, from the part files, to the assembly file.
So here is my problem, assembly sketchs are not adaptable? Either projecting to (from that base part file), or projecting from (from the assembly sketch to the part file). I tried both. How I should model this? How do I make weldment machining adaptive?
View 2 Replies
View Related
Mar 25, 2013
In past I replaced components in Assemblies with this sub:
Sub testReplacePartInAss()
Call ReplacePartInAss("W:INVENTORTPart1.ipt", "W:INVENTORTPart2.ipt")
End Sub
[Code] .....
But if the assembly is a weldment assembly the line
If oOcc.ReferencedDocumentDescriptor.FullDocumentName = sInAssFilename Then
creates an error '91' that the object is not set.
What has to be changed in this code so that it will work with 'normal' assemblies AND weldment Assemblies too.
View 3 Replies
View Related
Oct 27, 2013
Is it possible to change a normal assembly into a weldment assembly through iLogic?
View 4 Replies
View Related
Apr 24, 2012
Open the attached file 207665-124.ipt. how their is only one Solid Body, but the iam needs to be updated because the user added one more part to the assembly. As soon as it updates now instead of one Solid Body I have 2. I don't want 2 and this is not typical. Even if I derive the 207665-120 into a brand new part file, it is only one body. What is causing this to seperate into 2 bodies? I tried to re-create this from scratch and can't, but he has several files like this that need updates and the 2 bodies causes problems with the holes.
View 1 Replies
View Related
Dec 6, 2013
I cannot find the Convert to Weldment in the 2014.
View 3 Replies
View Related
Apr 22, 2013
Is it possible to export a weldment and include the weld volumes? I'm attempting to export to an .stl file and the welds are missing in the resultant file. (Or am I doing something wrong?) The weldment was converted from a standard assembly file, but the BoM structure was set to Normal, not Inseparable.
View 9 Replies
View Related
Apr 3, 2013
I have a weldment which includes a sheet metal part called sPart. I want to show a detail of the flat pattern of sPart on the weldment drawing and still be able to balloon the flat as the part of the weldment. So I clicked to add base view and selected sPart from the Preparation dropdown list under the Model State tab of the Drawing View dialog box. The problem is I cannot find an option for using the parts flat pattern.
View 6 Replies
View Related
May 27, 2012
My design consists of two steel rails that are welded together on top of a guardrail system. To allow the weld to be added between the steel rails I have converted my assembly file to a weldment.
My question is now I have this converted assembly with it's weld in the design can this still be used to perform stress analysis on ? I am not sure the need for assembly to be converted to allow a weld to be added.
View 2 Replies
View Related
Oct 5, 2011
What might cause some parts to retain there weld prep chamfers in the part file & other parts don't show the chamfers except in the assembly like an assembly feature?
I noticed that when parts were in a pattern & Weld Prep/chamfered, they retained the chamfer feature in the part.
View 2 Replies
View Related
Jan 24, 2013
I'm really struggling with constraining a weldment assembly. I've attached a JPG of the Assembly but I cant get the constrains to go where I want them.
Basically this assembly is a wheel with three equally spaced stays welded to a large nut hub. I have constrained the center axis of the wheel to the center axis of the Nut so the wheel and nut will remain aligned.
What I'm struggling with is constraining the three stays to the wheel and to the nut equally spaced around the nut.
View 7 Replies
View Related
Aug 27, 2012
I have this odd problem that when i want to do welds on a assembly, the machinng (holes) disappear. So i cannot put welding between a pipe and a hole made in a weldment.!
View 9 Replies
View Related
Jan 29, 2013
I was wondering if there is a way to change the appearance of a face in a weldment assembly environment. I have a weldment which in the machining process a part of weld bead as well as a portion of one of the components is machined down (spot faced) and I need to change the appearance of those face to polished, but it doesn't let me do that?
View 3 Replies
View Related
Aug 17, 2013
Have an easy file open and am trying to save a copy with a new name and Inventor either does nothing or crashes. Original full path and file name contains 243 characters (counting from drive letter to extension) New one will have 247 characters.
This is supposedly within the path/file name character limits for windows 7, which according to the ms website is 260 minus one for the null character at the end making it 259. So I am over 10 characters shy of the limit dictated by the OS.
Is inventor placing a stricter limit on the number of characters in the full path/file name? If so, why?
Obviously, working up the tree and adjusting upper level folder names is not an option as that would break every link in every assembly at that level or lower.
View 8 Replies
View Related
Sep 12, 2013
It only happens with this one file so far. It is a STEP file. I open it in Inventor and then when I hit save it gives me an error. The system cannot find the path specified.
The database in C:Users
stalkerDocumentsInventorDesktopAssetCreation2Imported ComponentsC731222M-U2 68514423656.ipt could not be saved.The system cannot find the path specified.The database in C:Users stalkerDocumentsInventorDesktopAssetCreation2Imported ComponentsC731222M-U2 11505_3.ipt could not be saved.The system cannot find the path specified.
I have tried to save it on two different computers with two different projects and I get the same error. I have never ran into this problem before and I open and save STEP files often.
View 9 Replies
View Related
Jul 30, 2013
I am unable to save any changes to my style & standards for Inventor lt suite 2014.
Is this meant to be as indicated by the wikihelp (Save styles to the library in the Style Library Manager), or have i got something installed wrong.
View 1 Replies
View Related
Oct 26, 2012
I have changed my template using the styles library. For some reason Inventor 2013 will not let me save my new settings as a default in my newly created template. Instead it gives me an error message that reads:
" The following style definitions in template ....... differ from the definitions in the style library; the style library will be used.
Part listart list (ANSI), Revision Table: Revision Table (ANSI)
If the style definitions in the style library are intended for the new document, update the template with the new style definitions. If the style definition in the template are intended for the new document, remove these styles from your style library using the Style Library Manager."
View 4 Replies
View Related
Oct 11, 2012
I am having problems with an error message relating to what appears to be a corrupted design data file. I am unable to save changes in my dwg to my design data file. I get this message:
Style library (C:UsersPublicDocumentsAutodeskInventor 2011Design Data) cannot be saved because it is damaged.If I attempt to copy a view in a dwg to another sheet or move it using the browser, I get the following error:
Paste View: problems encountered while executing this command.
Invalid XML value for 'SubstituteDisplayUnit'. Expected 'bool' received '44' in file:///C:/Users/Public/Documents/Autodesk/Inventor%202011/Design%20Data/PartsList.xml.
Invalid XML value for 'SubstituteFractionalFormat'. Expected 'bool' received '255' in file:///C:/Users/Public/Documents/Autodesk/Inventor%202011/Design%20Data/PartsList.xml.
I have also noticed that if I multi select components with ipropWiz5 and attempt to change the part name - it fails.I have tried reinstall in Inventor, ipropWiz5, etc. But to no avail.
View 9 Replies
View Related
Jul 8, 2013
I have tried, such as creating lines in a 3D sketch and projecting the geometry to surface, and creating a work plane, and both don't seem to work for me.... I'm trying to cut out a 5.8mmx14mm rectangle out of a cylinder. When I project the geometry to the cylinder's inner surface, I cannot trim the solid in order to extrude. I've attached the file.
View 9 Replies
View Related
Apr 9, 2012
I have some trouble with extruding this autocad file after i have imported it in inventor. I have tried to make everything as a block but with the same result..
View 5 Replies
View Related
May 16, 2012
I can't post the original files, but I have gotten permission to post jpegs of what I am trying to do.
My end goal is to fill in between the grey part and the surface. The surface comes from another part in the assembly, and I used Copy Object to get the surface in this part file. Ideally I would like to do something like Extrude> To Next and select the surface as my terminator. I have done this with success with curved surfaces, but not complex curved surfaces. Does Inventor not handle extruding to complex curves?
Another option I tried was simply extending this part out beyond the surface using the Split feature to trim the part. Again, to no avail. I also tried creating a subassembly of this part and the part the surface is derived from with this part extending beyond the surface, deriving it and subtracting the surface part so I could use Delete Face with the Lump option. No dice there, either.
There was a hole in the side of the surface where I am trying to extrude the part (it is still open on the other side of the surface), but I used Patch and it seemed to fill it in just fine.
How to get accurate fill volume data in complex assemblies.
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
View 2 Replies
View Related
Aug 24, 2013
I have been extruding bodies around parts, then using their verticies for the frame generator (to guard around complex machinery.I then suppress the body and am left with the guard frame.
when i go to get the mass for the part, it includes the volume of the solid body which was used to give the outline.how can i turn the material property to zero density?
View 3 Replies
View Related
Nov 1, 2012
I'm having trouble extruding a fully constrained sketch. The sketch is a cross-section of a hollow cylinder that is splined on the inside surface (see attached part file). The line segments that create these splines seem to be grouped together because moving one line moves the others, however the sketch will not extrude.
I can't use the coincident constraint button to group the lines because they don't separate from each other. I also tried to use the close loop button but was unable to select all the necessary lines.
how I can extrude this sketch or make an equivalent sketch that is easier to extrude
View 8 Replies
View Related
Jul 15, 2012
Coming from Sketch up to real big boy tools. I watched the tutorial videos and tried poking around a bit for this specific answer but came up a bit short.
What I'm trying to do is loft a face to a point. Easy enough. I've got my point established on an offset work plane, and I can just loft to that, however, I get nothing but straight lines. (First attachment)
An example of the ideal outcome in SketchUp is the second attachment.
I'm having the most difficulty trying to draw the curves along which I want the face to be lofted because, even as I sketch along my 2D plane, I can't snap the endpoints of my arcs to the endpoints of the face (or the point to which they'll all connect).
View 5 Replies
View Related
Nov 9, 2013
I am trying to constrain a point(on a different part) to the sketch(yellow) on the inside surface of the triangle part. If I try the constraint like how it is now, it only allows me to select one segment, not the entire triangular shaped line. It would work if inventor saw the sketch as one single element, but it of course does not. I tried making a 3d sketch of the inner surface and then constraining to that, but it did not work.
View 3 Replies
View Related
Jun 6, 2012
I am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies
View Related
Oct 3, 2012
I have just upgraded to 2013, and there is one "feature" I find kind of distracting. When working in a part, I create a new sketch. When I extrude that sketch, Inventor automatically switches me to an Iso view. I don't want that. I would prefer to stay in the view that I established.
Is there a way to turn that off?
View 4 Replies
View Related
Jul 19, 2013
I have a shrinkwrapped file. Now the link is broken from the actual assembly and the orginal assembly is now gone. Now in this shrinkwrapped file, there is a portion that I want to isolate. Is there any way to delete / remove the other parts that i dont need? Extruding, sculpting and delete faces dont work. So far the only thing I can do is add extrusions to the part but not remove.
View 1 Replies
View Related
