I am unable to save any changes to my style & standards for Inventor lt suite 2014.
Is this meant to be as indicated by the wikihelp (Save styles to the library in the Style Library Manager), or have i got something installed wrong.
In the styles my template drawing is set to Standard ANSI, then below are a bunch of styles like Dim and center mark etc.I want to change the precision of my template so that when I bring in a part to the drawing and dimension it. it is at a 3 place decimal.
View 1 Replies View Related1. How to make the STYLE and Standard Editor "NOT" Read Only. As a user, I do have the Administrator permission.
2. I have created a Style but then I do not want it anymore. How? Can I delete it.
How do I make a style in the library standard? I made new styles in the library for a revision table and parts list, but when placing them in an IDW I always get the standard tables.
It's not a big deal to change it in the format tab after placement, but when having 50+ sheets/daily its getting annoying.
Just as the title says. I can't seem to get it done.
View 1 Replies View RelatedI have a drawing that can be used to manufacturing purpuses or to normal company ipt, iam, etc., and I want to when opening a new drawing configure it if the designer if it chooses yes in the msgbox change the title bock and the standards in the styles.
started the code like this:
Dim i As Stringi = MessageBox.Show("Vai efectuar o desenho de uma ferramenta ou de um elemento seu?", "Parts List", MessageBoxButtons.YesNo, MessageBoxIcon.Question, MessageBoxDefaultButton.Button1)If i = "6" ThenActiveSheet.TitleBlock = "Alualpha_Ferr"End If
but it gives this error
The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
Autodesk 2013 Inventor Professional.
1. When in style and Standard editor with default standard selected under Standard I am trying to display mass properties in my view label.Select View Preferences tab. View type Base. Next to Display select Edit View Label.When Format Text box pops up in the selection for text type I have two options.
a. Properties - Model
b. View Label Properties
2. Inside an IDW file right click on view and select edit view.When Drawing View box pops up there is the option to access Edit View Label next to View Identifier.When Format Text box pops up in the selection for text type at this point there are seven options.
a. Properties - Model
b. Properties - Drawing
c. Drawing Properties
d. Sheet Properties
e. Physical Properties - Model
f. View Label Properties
g. Sheet Metal Properties
Questions 1. Why are ther only two options in S&S Editor?
2. Can I add more options to S&S Editor?
I would like to add mass to my lablel inside certain templates and have it show when I display a views Base view label. Not ot have to maunually add it each time it is displayed.
I have some assemblies with standard components inserted from Content Center which I have published.
After some changes I do on some of them within CC, I can't refresh those that are already placed in assemblies. The window that displays the components out-of-date won't appear. Only the message precedes the appearance of this windows is shown and that's it, nothing happens.
For new Assembly I don't have this problem.
I have created the part based on piece of standard angle taken from library. Now I want to make a mirrored copy of this part by Component-Mirror.
Inventor does not let me do it with standard part.
The question is: How I can transform a standard part to normal one, I mean I could get rid of belonging to standard part? Making a copy does not work. The only way is to derive and mirror this part but I wish there could be easy way.
Can't save to Style Library
View 2 Replies View RelatedI could not find Round Perforated Plate style / appearance on Autodesk Inventor 2013. Maybe it called "Perforated Metal 01 style" on previous Autodek Inventor version.
I just found Oblong Perforated Plate as attached.
I can not create a new pipe section. İn inventor 2013, at the tube and pipe style
I watched these steps . still not
[URL].......
[URL]........
[URL]........
When doing presentations I always use Realistic. However today I turned on my machine and wanted to choose this visual style but I can't. I have tried playing around with the options>Hardawre>Quality instead of my regular Performance.
See attached for my Hardware Diagnostic
I want to change some values in the default drawing template.
But doesnt succed to save it to an existing template
Like this picture shows about the precision
I have tried to use "Save Copy As Template" but the values goes back to the default settings
how to save dimension style settings to an template?
I created a template and changed some style properties. I can not save to master location and when I open the template is tells me it is going to override my custom style.
How do I save out my custom style to the defalut location?
one would think that you could just export the .stm file into hydraflow, make some changes, and import, and all would be fine. when i export, all of the structures in hydraflow come up as drop curb. how can they come in as what they actually are.. aka, when the part i use is a 2x4 box, it should come into hydraflow as a "grate inlet", or a st-mh will come in as a "manhole".
and then likewise, when the changes are made, and its brought back into autocad, they all come in as a "standard" style. except the outfalls, which show as a "standard" style, but come in with a different block, and get a whole new label (outfal - x)
How to get the default dimensions style "STANDARD" back into a drawing after it has been purged? I accidentally purged it and now I want it back. .
View 7 Replies View RelatedI cant change this to read / write. I'm using a vault project. Anyway of doing this so I can save materials to the style library using a vault project?
View 2 Replies View RelatedHave an easy file open and am trying to save a copy with a new name and Inventor either does nothing or crashes. Original full path and file name contains 243 characters (counting from drive letter to extension) New one will have 247 characters.
This is supposedly within the path/file name character limits for windows 7, which according to the ms website is 260 minus one for the null character at the end making it 259. So I am over 10 characters shy of the limit dictated by the OS.
Is inventor placing a stricter limit on the number of characters in the full path/file name? If so, why?
Obviously, working up the tree and adjusting upper level folder names is not an option as that would break every link in every assembly at that level or lower.
(Inventor 2012) I have a weldment. I can make holes and save, I can make revolved cuts and save. I can make chamfers and/or fillets and save. But if I try to extrude a cut (any cut), I receive an error.
Problems encountered while saving the document.
Error(s) detected while writing segment AmBREPSegment in database C:lah-blah.iam
Error detected while saving object of type MIxTransactablePartition in C:lah-blah.iam
Error detected while saving object of type MIxPartition in C:lah-blah.iam
The attempted write operation did not succeed. Part file may be corrupt.The database in C:lah-blah.iam could not be saved...
It only happens with this one file so far. It is a STEP file. I open it in Inventor and then when I hit save it gives me an error. The system cannot find the path specified.
The database in C:Users
stalkerDocumentsInventorDesktopAssetCreation2Imported ComponentsC731222M-U2 68514423656.ipt could not be saved.The system cannot find the path specified.The database in C:Users stalkerDocumentsInventorDesktopAssetCreation2Imported ComponentsC731222M-U2 11505_3.ipt could not be saved.The system cannot find the path specified.
I have tried to save it on two different computers with two different projects and I get the same error. I have never ran into this problem before and I open and save STEP files often.
I have changed my template using the styles library. For some reason Inventor 2013 will not let me save my new settings as a default in my newly created template. Instead it gives me an error message that reads:
" The following style definitions in template ....... differ from the definitions in the style library; the style library will be used.
Part listart list (ANSI), Revision Table: Revision Table (ANSI)
If the style definitions in the style library are intended for the new document, update the template with the new style definitions. If the style definition in the template are intended for the new document, remove these styles from your style library using the Style Library Manager."
I am having problems with an error message relating to what appears to be a corrupted design data file. I am unable to save changes in my dwg to my design data file. I get this message:
Style library (C:UsersPublicDocumentsAutodeskInventor 2011Design Data) cannot be saved because it is damaged.If I attempt to copy a view in a dwg to another sheet or move it using the browser, I get the following error:
Paste View: problems encountered while executing this command.
Invalid XML value for 'SubstituteDisplayUnit'. Expected 'bool' received '44' in file:///C:/Users/Public/Documents/Autodesk/Inventor%202011/Design%20Data/PartsList.xml.
Invalid XML value for 'SubstituteFractionalFormat'. Expected 'bool' received '255' in file:///C:/Users/Public/Documents/Autodesk/Inventor%202011/Design%20Data/PartsList.xml.
I have also noticed that if I multi select components with ipropWiz5 and attempt to change the part name - it fails.I have tried reinstall in Inventor, ipropWiz5, etc. But to no avail.
How to set & save a standard setting for all the new sheets that we work on? For eg: the dimensions, the text size etc.
View 4 Replies View RelatedI'm working on a fire damaged 4 floor condo project.I have an xref zip folder sent to me from the original architectural firm. It's been unzipped. Now I have multiple drawings. Each with it's own xref. I want to be able to have a fully editable drawing (in this case of a 3 story condo). I want to be able to add or delete, at will, any part of the drawing without any concerns of messing up an xref file.
How can I do this?
I read that it's not possible to import a style (styxml file) into the style editor through the API, there is no dedicated command.
However I'm wondering if there's a a way to have the internal name corresponding to the button as we can do for the ribbon buttons (there's a sample code which does this).
So is it possible ot get the internal name of a button inside a dialog box (style editor here) or is it really hopeless to think I can import a style with a macro ?
By the way, that would be for Inventor 2009.
I am working with a template, that doesn't allow me to change the dimension style. In the project the Use Style Library is set to Read/Write. I have created my dimension style, at this point just a copy of the ANSI standard with a text size difference. I went to my template and set that syle as my default, and saved it. Now the fact that it doesn't automatically update the drawing I had alreadycreated is a nuisance, however if I creat a new drawing, the style has reverted to a different standard, that is not even the ANSI default. If I right click a dimension and change the dimstyle to what I saved it does update, but if I try to change the style again it defaults to a random dimstyle, AND changes the style even if I hit cancel. So... the question is how to make the changes stick?
View 1 Replies View RelatedI can´t change the standard program in Adobe Bridge CC on my Mac to Photoshop CC. How can i change this!?
View 1 Replies View RelatedIs there some way to save a standard set of metadata (photographer name, copyright status, website, other unchanging stuff) that I could apply to new/old sets of photos?
View 3 Replies View RelatedFor some reason I cant change the line type on the file with my drawing on, but when I open a new file, I can.
View 9 Replies View RelatedI`m working on this architecture project and copied some clean lines to the file from a landscape design project.
Somehow these text styles showed up to my file (more than 50 text styles from xrefs, because of their strange names, even though I don`t have any attachment). And it says that I cannot delete them cause I`m using it.
I`ve tried out everything I could imagine and read about it. It doesn`t work. Now this simple .dwg file is very heavy and with a lot of unwanted text styles. Even if I try to copy just the lines to start over another file, all the text styles go together.
Tried:
PURGE
AUDIT
RECOVER
WBLOCK
TXTMRG (not sure how to use it)
QTEXTMODE
Attached is one of the files that this happened to. As I`m working with a few attachments this happened to all of it. My default text style are "B3_1.5", "B3_2.0" and "B3_3.0". All the other are unwanted text styles.