AutoCAD Inventor :: Cannot Find Convert To Weldment In 2014
Dec 6, 2013I cannot find the Convert to Weldment in the 2014.
View 3 Replies
ADVERTISEMENT
AutoCAD Inventor :: Cannot Convert To Weldment
May 31, 2013I have a medium sized assembly that I was working with. I decided I needed to create a weldment, so I stripped the assembly of all subassemblies, individual parts, etc and saved it as a different name. However, Inventor will not allow me to convert it to a weldment. That optoin is greyed out.
The only thing I can think of is I have a base part that I have hidden. It is used to drive the assembly. Perhaps that is causing a problem, but I cannot remove it or all associativity will be lost. I deleted it temporarily to try, but did not save it. The convert to weldment option did not appear after I deleted it.
AutoCAD Inventor :: Convert Assembly To A Weldment
Aug 28, 2013I just was upgraded to Inventor 2014. I've got an assembly that I want to convert into a weldment. The "Convert to Weldment" icon doesn't appear where it used to be in 2013. I cannot find a way to make it pop up. Is it no longer possible to use this button to convert a an assembly into a weldment?
View 5 Replies View RelatedAutoCAD Inventor :: Convert To Weldment Assembly With ILogic?
Oct 27, 2013Is it possible to change a normal assembly into a weldment assembly through iLogic?
View 4 Replies View RelatedAutoCAD Inventor :: Convert Weldment Assembly Back To Regular Assembly Template
Jun 6, 2012I am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies View RelatedAutoCAD Inventor :: Split Face In Weldment?
Sep 19, 2013I'm trying to model plug welds in IV2014. I've read all the posts here that say that I need to split the hole faces. Problem is, the split face command doesn't seem to appear in weldments. I want to make the holes to be plugged as a weld preparation. Am I just missing something here, or is IV so backward that a common weld can only be achieved when not working with a weldment?
Inventor Pro 2014 SP1
HP Z400 Workstation
Intel Xeon W3565 @ 3.20GHz
12Gb RAM
Win 7 64 Pro SP1
Spacepilot Pro v3.17.4
AutoCAD Inventor :: Adaptivity In Weldment Machining
Jun 28, 2013 I started my project, the design is basically a bulkhead chassis design with multiple access panels on all 3 sides. I wanted all of the hole patterns on this assembly to be based on one sketch. So I created a base part inside the assembly, this part compiled of sketches and the sketches compiled of construct lines and points (for panel and chassis fastener hole patterns). This was going great, after learning a couple tricks.
Manufactuing had determined that I need to machine the holes on the chassis after welding. Which means I need to move the adaptive features, from the part files, to the assembly file.
So here is my problem, assembly sketchs are not adaptable? Either projecting to (from that base part file), or projecting from (from the assembly sketch to the part file). I tried both. How I should model this? How do I make weldment machining adaptive?
AutoCAD Inventor :: Replace Components In Weldment Assembly
Mar 25, 2013In past I replaced components in Assemblies with this sub:
Sub testReplacePartInAss()
Call ReplacePartInAss("W:INVENTORTPart1.ipt", "W:INVENTORTPart2.ipt")
End Sub
[Code] .....
But if the assembly is a weldment assembly the line
If oOcc.ReferencedDocumentDescriptor.FullDocumentName = sInAssFilename Then
creates an error '91' that the object is not set.
What has to be changed in this code so that it will work with 'normal' assemblies AND weldment Assemblies too.
AutoCAD Inventor :: Derived Weldment Changes To 2 Solid Bodies
Apr 24, 2012Open the attached file 207665-124.ipt. how their is only one Solid Body, but the iam needs to be updated because the user added one more part to the assembly. As soon as it updates now instead of one Solid Body I have 2. I don't want 2 and this is not typical. Even if I derive the 207665-120 into a brand new part file, it is only one body. What is causing this to seperate into 2 bodies? I tried to re-create this from scratch and can't, but he has several files like this that need updates and the 2 bodies causes problems with the holes.
View 1 Replies View RelatedAutoCAD Inventor :: Unable To Save After Extruding Cut In Weldment
Oct 7, 2011(Inventor 2012) I have a weldment. I can make holes and save, I can make revolved cuts and save. I can make chamfers and/or fillets and save. But if I try to extrude a cut (any cut), I receive an error.
Problems encountered while saving the document.
Error(s) detected while writing segment AmBREPSegment in database C:lah-blah.iam
Error detected while saving object of type MIxTransactablePartition in C:lah-blah.iam
Error detected while saving object of type MIxPartition in C:lah-blah.iam
The attempted write operation did not succeed. Part file may be corrupt.The database in C:lah-blah.iam could not be saved...
AutoCAD Inventor :: Exporting Welds Along With Parts From Weldment?
Apr 22, 2013Is it possible to export a weldment and include the weld volumes? I'm attempting to export to an .stl file and the welds are missing in the resultant file. (Or am I doing something wrong?) The weldment was converted from a standard assembly file, but the BoM structure was set to Normal, not Inseparable.
View 9 Replies View RelatedAutoCAD Inventor :: Flat Pattern On Weldment Drawing
Apr 3, 2013I have a weldment which includes a sheet metal part called sPart. I want to show a detail of the flat pattern of sPart on the weldment drawing and still be able to balloon the flat as the part of the weldment. So I clicked to add base view and selected sPart from the Preparation dropdown list under the Model State tab of the Drawing View dialog box. The problem is I cannot find an option for using the parts flat pattern.
View 6 Replies View RelatedAutoCAD Inventor :: Stress Analysis On Weldment Assembly
May 27, 2012My design consists of two steel rails that are welded together on top of a guardrail system. To allow the weld to be added between the steel rails I have converted my assembly file to a weldment.
My question is now I have this converted assembly with it's weld in the design can this still be used to perform stress analysis on ? I am not sure the need for assembly to be converted to allow a weld to be added.
AutoCAD Inventor :: Some Weldment Parts Show Prep Chamfer Some Don't
Oct 5, 2011What might cause some parts to retain there weld prep chamfers in the part file & other parts don't show the chamfers except in the assembly like an assembly feature?
I noticed that when parts were in a pattern & Weld Prep/chamfered, they retained the chamfer feature in the part.
AutoCAD Inventor :: Weldment Assembly - Constraining On Revolved Part
Jan 24, 2013I'm really struggling with constraining a weldment assembly. I've attached a JPG of the Assembly but I cant get the constrains to go where I want them.
Basically this assembly is a wheel with three equally spaced stays welded to a large nut hub. I have constrained the center axis of the wheel to the center axis of the Nut so the wheel and nut will remain aligned.
What I'm struggling with is constraining the three stays to the wheel and to the nut equally spaced around the nut.
AutoCAD Inventor :: 2013 / Cannot Put Welding Between A Pipe And Hole Made In Weldment
Aug 27, 2012I have this odd problem that when i want to do welds on a assembly, the machinng (holes) disappear. So i cannot put welding between a pipe and a hole made in a weldment.!
View 9 Replies View RelatedAutoCAD Inventor :: Change Appearance Of Face In Weldment Assembly Environment
Jan 29, 2013I was wondering if there is a way to change the appearance of a face in a weldment assembly environment. I have a weldment which in the machining process a part of weld bead as well as a portion of one of the components is machined down (spot faced) and I need to change the appearance of those face to polished, but it doesn't let me do that?
View 3 Replies View Related3ds Max :: Backburner 2014 Could Not Find A Manager
Oct 30, 2013I'm trying to set up Backburner and 3DS Max Design, and I'm a newbie to both. I'm getting the warning 'Could not find a Manager. Will keep trying...' when I try to connect to my manager machine from the server machine using the manager's IP address. I can connect to the manager from the monitor on the server machine, however, and I can connect from a virtual machine running Windows 8. The server machine is running Windows Server 2012 - I haven't been able to find where someone says if you can or can't use Server 2012.
View 3 Replies View RelatedRevit :: Cannot Find The Project Browser In 2014
May 3, 2013I am attempting to learn revit via the on-line tutorials. I have figured how put in walls, doors, and furniture. I would like to do some elevation work and I notice I have no project browser.
How do I bring up the project browser?
AutoCAD Inventor :: Rotating UCS In 2014
Jun 20, 2013can change your UCS direction in an Inventor Sketch?
I'm copying from MDT into an Inventor sketch and when I do so, my UCS goes in a different direction and my sketch is like out in space.
AutoCAD Inventor :: 2014 FrameGen - BOM Weights
Oct 3, 2013I have a FrameGen BOM setup as desired and added the column for Mass/lbmass to get the weight. However on those rows where there are multiples of the Item QTY (2 of this, 3 of that) the Mass shows just the weight of one item rather than the combined weight...which is what I want. I tried making a custom property call WEIGHT and entering an expression, but in that selection I do have mass but not Item QTY as a selection.
View 1 Replies View RelatedAutoCAD Inventor :: Opening IDW From 2013 In 2014?
Jun 18, 2013I am having problems opening an idw created in the 2013 version on my inventor professional 2014.
The idw contains its own template, views, dimensions, details and cuts.
Upon opening in 2014 to release details of the scale is changed randomly and the views are out of the leaf.
AutoCAD Inventor :: Cannot Open New File In 2014
Oct 24, 2013In the right upper corner of autosek Invetor 2014 is a button wich says New (NEU = German) if i click there the window gets bright gray and says no response (keine Rückmeldung) ... i started the Laptop several times but it never Works.
View 3 Replies View RelatedAutoCAD Inventor :: How To Export SAT Files V.6.0 From 2014
Apr 26, 2013How to export SAT files v.6.0 from 2014
View 4 Replies View RelatedAutoCAD Inventor :: 2014 - DWG Will Not Check Into Vault
May 29, 2013I am having issues getting my .dwg files to check back in to Vault Basic. I can get all different types of files (.iam .ipt .idw) to check in without issues, but .dwg files hang and Inventor will eventually lock up.
I've tried disabling Visualization and I still cannot make it past this point. I can even tell it to check in everything at once, and it will breeze through the other files but any .dwgs will hang.
My PC Config:
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
16 GB RAM
Dual AMD Radeon HD 6450
Running Product Design Suite 2014
AutoCAD Inventor :: 2014 Ghosting Graphics
Jul 30, 2013I sometimes am having some graphics problems. I placed a gantry into an assembly and it leaves a 'ghost' image behind. When I go under options and change from say 'smoother' to 'smooth' the problem goes away. Any way to avoid this totally?
My specs: Inventor Professional 2014, 64 bit edition, I've got an HP Z400 desktop which is a 3.2GHz Processor with 4 cores, 12 GB RAM. NVIDIA Quadro 4000 graphics card.
I never had this problem with 2012, nor 2013, same computer, same settings which I always import.
AutoCAD Inventor :: 2014 Library Empty
Sep 8, 2013How do I install the library inventor 2014 student version, the mine is empty.
View 1 Replies View RelatedAutoCAD Inventor :: Import Revit (RFA) To 2014?
Aug 12, 2013We are being pushed from some of our customers to supply BIM files for Revit.I was told by our software supplier that Inventor 2014 could create Revit files, and it looks as though I can via the BIM Tab on the Ribbon. I havent used Revit or created any BIM content before and I was hoping to open another manufactures file (*.RFA) in Inventor to disect the file and how to create our own files. I can only find an import option in the OPEN dialog box for a Revit Project File (*.rvt). Is it possable to open/import a RFA files in Inventor 2014?
View 4 Replies View RelatedAutoCAD Inventor :: Record Macro In 2014?
Dec 10, 2013Is it possible to Record Macro in Inventor 2014?
If yes, how can I acieve this?
If No, Is there any Add-in or other possibilities? Any Add-in available?
AutoCAD Inventor :: View 2014 Printing
Aug 9, 2013My production team uses the Inventor View to view drawings once they are released from engineering. Sometimes they get printed so they can send a copy to our vendors. When ever they print from Inventor View 2014 the lines that are on the Visible Layer do not print. Also the lines in the titeblock are not very dark even though the "print all colors black" has been checked. It does not matter which printer or computer is used.
View 3 Replies View RelatedAutoCAD Inventor :: 2014 Fails To Export To DWG On Win 8.1?
Oct 2, 2013I installed inventor 2014 on my laptop with windows 8.1, and export to DWG does not work. When i go to export, the options button doesnt work. when i click save, it pops up a windows and says "Problems encountered while saving the document." On my desktop with 2014 it works perfectly. I have the newest sp1.
View 8 Replies View Related