My production team uses the Inventor View to view drawings once they are released from engineering. Sometimes they get printed so they can send a copy to our vendors. When ever they print from Inventor View 2014 the lines that are on the Visible Layer do not print. Also the lines in the titeblock are not very dark even though the "print all colors black" has been checked. It does not matter which printer or computer is used.
View 3 Replies
I recently updated to Inventor Professional 2014.
The problem I encounter is that Inventor crashes sometimes when I turn the realistic view mode on.
Also the rendering in realistic view mode is much slower than with Inventor 2013.
Are there some ray tracing options that I need to set up?
Design view representations in an iPart file are not included in the generated members after installing Inventor 2014 SP2 (and also in Update 1).
In the attached part factory, the two work planes are included in the members. They would need to be individually set invisible in each assembly view representation because the members only have the Master view representation.
I have been designing a school project for the last 2 months using the student version of inventor 2014. The realistic views have been working the whole time before but now it is not working. I click on it, and it just switches back to shaded view. If I click on shadows, or reflections I get the following message.
"One or more visual effects in use are not supported by the current system graphics hardware. We strongly recommend running the Diagnostics check in applications option for detailed information.Would you like to run hardware Diagnostics now?"
After selecting Yes I get the following,The graphics driver is fully certified.
Graphics Hardware Description: OpenGL Microsoft Corporation GDI Generic
Graphics driver file vga.dll is version 6.1.7600.16385
Using the GDI-Generic driver
The display is using 32-bit color
Click the OK button to place diagnostic information on the clipboard.
I hit OK and everything closes. This is left on my clipboard.
This graphics driver is fully certified.
Graphics Hardware Description: OpenGL Microsoft Corporation GDI Generic
Graphics driver file vga.dll is version 6.1.7600.16385
Using the GDI-Generic driver
The display is using 32-bit color
Inventor Version:
Build: 170, Release: 2014 RTM - Date: Thu 02/28/2013
64-Bit Edition - 8192.00 GB
Loaded Inventor Add-Ins:
Assembly Bonus Tools
Simulation: Dynamic Simulation
Simulation: Frame Analysis
iCopy
System Information:
Operating System: Windows 7 Enterprise 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: Apple Inc.
System Model: MacBookPro10,1
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i7-3720QM CPU @ 2.60GHz (8 CPUs), ~2.6GHz
System Memory: 16384MB RAM
Page File: 1787MB used, 30791MB available
DirectX Version: DirectX 11
DxDiag Version: 6.01.7600.16385
Inventor Hardware Library Information:
HW Library Version = $Revision: #1 $
HW Library Date = $DateTime: 2013/01/15 11:05:45 $
Windows 7
Original driver information:
Graphics HW Vendor Supported for Autodesk Inventor: False
rating 0, optimization level 3
Optimization Level = 0
Options = 0
Warning Options = 0
[code]....
We just recently upgraded to Inventor Pro 2014. I have a user who has created a singled shaded view drawing. He want to print the drawing shaded. When he prints he gets a line drawing. It even appears like a line drawing when he previews it. He gets the same results when printing to Adobe. He said it printed properly in the morning yesterday and when he tried to print again in the afternoon it would not print shaded. He rebooted this morning and he still can't print a shaded drawing from Inventor. We looked at his printer settings and everything looks good. He is the only one in my department who is having this problem.
Dell Precision T7500
Windows 7 x64 SP1
Nvidia Quadro FX5800
16 GB RAM
My Autocad 2014 crashes EVERYTIME after printing to PDF. What could be causing this problem? Never had this problem with my older 2012 on the same computer.
View 9 Replies View RelatedIs it possible that the AutoCAD 2014 LT open DWF file? It looks like that the 2014 LT can open DWG, DXF and DWT.
I am running Windows8 in which the Autodesk Design Review 2013 could not be installed.
HP Designjet T520 36 inch ePrinter (CQ893A)
Latest HP-Driver: 61.125.1522.100
Latest Firmware: AXP2CN1325AR
Windows 7 64-Bit with AutoCAD MEP 2013 + 2014
we get rasterized diagonal lines when printing from AutoCAD on that Printer in A0 format, straight lines are ok.
Printing FIRST to an PDF printer an THEN to the T520 ist also ok (this is what the customer currently does and the quality is good). Got some suggestions from a local ACAD dealer (max. details in the printer driver) but no success ...
Is there any tool in AutoCAD 2014 to obtain broken section view (generated from a base view in a layout?I have some very long section views and just can't find a way to shorten them...
View 2 Replies View RelatedIs there a way to switch to the classic tray view in AutoCAD 2014? What I am referring to as "classic" was the tray that had the more rectangular icons with words in them as opposed to graphics. The buttons would highlight if active. To ensure I am clear on what I am referring to as the "tray": the new tray has smaller, square icons, shown below.
View 6 Replies View RelatedExperiencing the Thin Lines mode printing with thin lines, not just affecting the view display?
View 9 Replies View RelatedI have had numerous problems trying to print from 2014 using the setting "Visible portion of current window". This feature was never that good, anyway, but now it seems to be WAY worse. I'm spending 5-10 minutes to just send something to the printer that should only take 5 seconds.
See the attached images of what I see on screen, the print dialog boxes and then what I actually get. The "Center" option doesn't function properly and now I must manually adjust the margins to print what I see on the screen.
We have autodesk building design suite premium 2014 on the machines at our office and I can't civil view to run on any of the four computers. There is an error message that says: "no civil view country resource kit folders could be found in the following loaction...". I have seen something online that says to find the civilview2014.msi and run it manually. I have tried that and it says that it can't find autode~1.cab. I have searched the pc and cannot find that file anywhere.
I think the software was installed from a flash drive. Would downloading the software and reinstalling it do anything?
I have also installed all updates and service packs for this product.
I've been playing around with the print options for a while here, and can't seem to figure this out. I want to print multiple view ports on one page.
View 7 Replies View RelatedFrom my project manager > views, I select a view, it opens in model. I change to paper space and have my plan and an isometric view (in wire frame). I go to view and select shaded with edges. Perfect, colors on both plan and isometric are where I want them, now I want to print this.
I select my print icon and change my paper size select my printer. I select extents, center the plot and fit to paper. I preview.. And my color disappears. What.. Am I doing wrong. Should I be making my paper representations from a different start?
Yesterday.. I was trying to do the same thing.. But starting with the drawing in constructs. I end up with the same, my isometric drawing looses most of its color, the windows have color as does one layer (a line showing the outline of the floor under). The plan drawing has most of the colors but some of the layers are black where in the model they have color. To further complicate the problem.. The same procedure making a first floor drawing has the plan in complete color.
Is there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies View RelatedI started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
I made a drawing, but after using ilogic (ilogic is in drawing,assembly, part) in it, drawing view of a particular part is coming in hidden line, other are shaded as u can see in image.
Drawing view is associative, all edges shown, level of detail is master, view style is Hidden Line Removal with Shaded
Computer Config:
Inventor 2013
Intel Xeon CPU
2.67 GHZ
8 Gb ram
Windows 7 64 bit
Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies View RelatedI've created a drawing and when I create a detail view, the actual view appears in the drawing but the circle and arrows along with the view identifier are not showing up. It's like the visibility has been turn off. how to turn it back on?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I have made an exploded view and placed it an a drawing. I would like to view inside one of the bodies to show where the exploded internals sit, however when I do a break out of the body the trail lines from the exploded internals also get sectioned. Is there a way to control the sectional properties of a trail line?
View 4 Replies View RelatedAfter upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
Sometimes when I try to create a detail view of an isometric view in my IDW, the "detail full boundary" option is greyed out? Why would this be? If I try an ortho view it works fine.
View 5 Replies View Relatedhow to show section view in base view with out projection the component.
View 2 Replies View RelatedI have a long shaft with parts mounted on. i want to section it and show the parts. i don't need to show the whole length of the shaft.
I know i can crop the isometric view, but this way i will not see the key hole which is on the other side, it's hidden.
If i make a section it 's in an orthogonal view only.
I want to make the section view, but later to transform the sectioned view to an isometry. is it possible?
Is there a way to save a section view in the assembly as a view rep? Am using 2011.
View 9 Replies View RelatedEach time when I place a part in base view, have to follow few steps; go through view label, format Text, than choose type option - [Properties-Model] and its property - [Part Number], than placing dimensions. it takes long time and very repetitive, especially, when placing a hundreds of parts and I was wondering if there is an option, to set up view label; [Properties - Model ]& [Part number], as a DEFAULT. So, each time placing a part, in base view it will come up with correct label. Also, overall dimensions, can it be retrieve using parameters of the part?
View 4 Replies View RelatedI have a detail view of a groove on a cylinder. I want to dimension a diameter in which I only see one side, the other side is not in the detail view.
From some posts I see that I should auto insert a centerline then dimension from centerline then choose options "dimension linear".
First when I try to auto insert centerlines it does not insert the centerline for me. Perhaps because my detail is smaller. If I make the field for the detail view larger it makes a centerline, but I dont want to do that. I have tried making a sketch of the other side and the centerline. When I dimension from here I do not have the right click option of dimension linear, instead only arrowhead options.
Using Inventor Professional 2012
It's possible to do a cut view with the cup part with a different view style from the other "not Cut" half.
I achieve that, whit the cut view + normal view croped hover the cut view... but this isn´t a accurate process...
Autodesk Factory Design Suite Ultimate 2014
Autodesk Simulation Mechanical
Autodesk Simulation CFD
Windows 7
I place the first view in a drawing and want to be sectioned.
Is there a way to do that, since when i mark the section line, another view is created.
Or should i put the main view outside of the paper boundaries?
is it possible to create a detail view of an Iso view which is created with perspective camera? I tried it but it does not seem to let you have the option of selecting the connection line or detail view boundary?
View 5 Replies View Related
