Is it possible that the AutoCAD 2014 LT open DWF file? It looks like that the 2014 LT can open DWG, DXF and DWT.
I am running Windows8 in which the Autodesk Design Review 2013 could not be installed.
My production team uses the Inventor View to view drawings once they are released from engineering. Sometimes they get printed so they can send a copy to our vendors. When ever they print from Inventor View 2014 the lines that are on the Visible Layer do not print. Also the lines in the titeblock are not very dark even though the "print all colors black" has been checked. It does not matter which printer or computer is used.
View 3 Replies View RelatedI recently updated to Inventor Professional 2014.
The problem I encounter is that Inventor crashes sometimes when I turn the realistic view mode on.
Also the rendering in realistic view mode is much slower than with Inventor 2013.
Are there some ray tracing options that I need to set up?
Is there any tool in AutoCAD 2014 to obtain broken section view (generated from a base view in a layout?I have some very long section views and just can't find a way to shorten them...
View 2 Replies View RelatedDesign view representations in an iPart file are not included in the generated members after installing Inventor 2014 SP2 (and also in Update 1).
In the attached part factory, the two work planes are included in the members. They would need to be individually set invisible in each assembly view representation because the members only have the Master view representation.
Is there a way to switch to the classic tray view in AutoCAD 2014? What I am referring to as "classic" was the tray that had the more rectangular icons with words in them as opposed to graphics. The buttons would highlight if active. To ensure I am clear on what I am referring to as the "tray": the new tray has smaller, square icons, shown below.
View 6 Replies View RelatedI have been designing a school project for the last 2 months using the student version of inventor 2014. The realistic views have been working the whole time before but now it is not working. I click on it, and it just switches back to shaded view. If I click on shadows, or reflections I get the following message.
"One or more visual effects in use are not supported by the current system graphics hardware. We strongly recommend running the Diagnostics check in applications option for detailed information.Would you like to run hardware Diagnostics now?"
After selecting Yes I get the following,The graphics driver is fully certified.
Graphics Hardware Description: OpenGL Microsoft Corporation GDI Generic
Graphics driver file vga.dll is version 6.1.7600.16385
Using the GDI-Generic driver
The display is using 32-bit color
Click the OK button to place diagnostic information on the clipboard.
I hit OK and everything closes. This is left on my clipboard.
This graphics driver is fully certified.
Graphics Hardware Description: OpenGL Microsoft Corporation GDI Generic
Graphics driver file vga.dll is version 6.1.7600.16385
Using the GDI-Generic driver
The display is using 32-bit color
Inventor Version:
Build: 170, Release: 2014 RTM - Date: Thu 02/28/2013
64-Bit Edition - 8192.00 GB
Loaded Inventor Add-Ins:
Assembly Bonus Tools
Simulation: Dynamic Simulation
Simulation: Frame Analysis
iCopy
System Information:
Operating System: Windows 7 Enterprise 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: Apple Inc.
System Model: MacBookPro10,1
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i7-3720QM CPU @ 2.60GHz (8 CPUs), ~2.6GHz
System Memory: 16384MB RAM
Page File: 1787MB used, 30791MB available
DirectX Version: DirectX 11
DxDiag Version: 6.01.7600.16385
Inventor Hardware Library Information:
HW Library Version = $Revision: #1 $
HW Library Date = $DateTime: 2013/01/15 11:05:45 $
Windows 7
Original driver information:
Graphics HW Vendor Supported for Autodesk Inventor: False
rating 0, optimization level 3
Optimization Level = 0
Options = 0
Warning Options = 0
[code]....
We just recently upgraded to Inventor Pro 2014. I have a user who has created a singled shaded view drawing. He want to print the drawing shaded. When he prints he gets a line drawing. It even appears like a line drawing when he previews it. He gets the same results when printing to Adobe. He said it printed properly in the morning yesterday and when he tried to print again in the afternoon it would not print shaded. He rebooted this morning and he still can't print a shaded drawing from Inventor. We looked at his printer settings and everything looks good. He is the only one in my department who is having this problem.
Dell Precision T7500
Windows 7 x64 SP1
Nvidia Quadro FX5800
16 GB RAM
We have autodesk building design suite premium 2014 on the machines at our office and I can't civil view to run on any of the four computers. There is an error message that says: "no civil view country resource kit folders could be found in the following loaction...". I have seen something online that says to find the civilview2014.msi and run it manually. I have tried that and it says that it can't find autode~1.cab. I have searched the pc and cannot find that file anywhere.
I think the software was installed from a flash drive. Would downloading the software and reinstalling it do anything?
I have also installed all updates and service packs for this product.
I have just updated to Map3D 2014 and work in 2D Drafting Workspace. In 2013, the export button was located in the Map Drafting tab, Map Output panel. In earlier versions it was under output tab as map 3d export. However, its position in 2014 from 2013 has been replace by a "To FDO Connection". it directs me to the older location of under the output tab - map data transfer - map 3d output, however this does not seem to exist. The only panels I have there are Plot and Export to DWF/PDF, no map data transfer. I can find it if I switch to Map Drafting Workspace in the Map Drafting pulldown - inport/export - export, or if I use the command "mapexport", but from both it only asks where and what to name the file and what type (shp, tab, etc), and then the routine stops and goes back to the drawing instead of opening the dialog to select objects, etc. Some of my clients insist on shp files.
View 9 Replies View RelatedAnother problem i am having in 2014.....i cannot seem to edit my acad.pgp file?? I use the express tool, and it's doesn't work. I go to the actual pgp file in the enu and it doesn't work either. I enter REINT and it doesn't work!
View 3 Replies View RelatedIn the right upper corner of autosek Invetor 2014 is a button wich says New (NEU = German) if i click there the window gets bright gray and says no response (keine Rückmeldung) ... i started the Laptop several times but it never Works.
View 3 Replies View RelatedMy Autodesk Inventor Professional 2014 (witch I downloaded as beta) can not now open it's own files, but it opens other models that I did using 2013, attached is the message that shows up
View 1 Replies View RelatedDoes a file on AutoCAD 2014 open on AutoCAD 2010?
View 4 Replies View RelatedYesterday inventor worked fine, I made 3 new parts.But today when I wanted to put these parts together in an assembly and I try opening a new file, inventor crashes?
I still can open projects, but can't create a new project.
PS. I'm using Inventor 2014 Student Version with service pack 1 on Windows 8.1
Isn't the new Synonym feature the same as PGP file?
View 7 Replies View RelatedHow do I open an 2014 assembly file to 2013
View 1 Replies View RelatedWhen I try to attach a 2013 Excel file into a 2014 drawing I get a message 'You have selected an unsupported DGN File. Only V7 and V8 files are supported.' Cannot attache through the Import command either. I know in past versions you could insert the file and any changes made to the file appeared to the attachment in the drawing.
Is this no longer possible? Surely not, it is way to handy. What am I overlooking to make this happen?
I have a situation where a teacher in our PLTW(Project Leads The Way) who uses inventor products for sometime is not able to save a old current project or make changes to this project, then save it. What is happening is it gives a blue screen error and corrupts the file so it cannot be fixed or opened. We cannot duplicate the process with the teacher, but we can if the file is opened on another computer and it is opened also on another computer at the same time as other pc. However, the teacher states that he doesn't have it open on any other PCs in the school.
View 2 Replies View RelatedI had Inventor 2013 and it worked well for a long time, I didn't use it for a while, then yesterday I tried to use it again and it wouldn't work. It starts up fine, and gets to the menu where you can choose from recent files, new files, tutorials, etc. After I select anything to open, whether its a new or old file, the program will load open the file then immediately stop working. No error message is displayed besides Windows telling me "this program has stopped working". I updated to 2014 yesterday, and the exact same problem persists.
View 9 Replies View RelatedSince I create sheet metal files in Inventor 2014, the subtype of this parts is not always the same. Migrated files from an earlier version have the right ID.
So my add-in to detect sheet metal parts fails.
I use the
If IV.ActiveEditDocument.SubType = "{9C464203-9BAE-11D3-8BAD-0060B0CE6BB4}" Then
As soon as I click the drop down the screen shows as blank and the program freezes. This happens with all the following commands, Save AS, Insert.
I have checked the FILEDIA and it is set to 1
I seem to have the problem with all autocad products on my Windows 8 pro desktop. I have tried Autocad LT 2013 & 2014.
Is there a known issue with inventor 2014 and STP file exports loosing their colour settings?
We export PCB's and assemblies to Altium PCB CAD tools as step files and have just noticed that the colours don't travel well at the moment! The assemblies just end up light grey/white. I tried an earlier stp export dated 2011 and that opened fine in Altium but not any 2014 exports.
The problem seems to happen ins CS5 and CS6 as well. We have a complex piece of artwork for a foil blister and we use a paragraph of text that has 3 transforms applied to which effectively step and repeat the paragraph of text in a repeat pattern across the artwork. This setup very precisely as it needs to be 100% accurate for print purposes as several units are printed side by side and the repeat runs across the units. Everything is setup correctly in Illustrator and then we re-save as a PDF with 'Preserve Illustrator Editing Capabilities' on.
We genearally save as a PDF 1.6 but we have tried all the combinations now. The file still looks perfect in Illustrator but when the PDF is opened in Acrobat (any version) the step and repeat (transform) on the paragraph of text is now no longer in alignment on onside of the artwork but still OK on one side. No matter what we do we can't fix this problem andit's recreatable each time. Also it's not file specific as we can build a new file and it will also exhibit the problem. We're only talking about a tiny jump here - <0.2mm but this means the artwork is out of spec.
Undo Command still turning off (disabled) constantly even after dumping the temp folder, and the turn off, turn on solution does not seem to work either.
Any solutions to this nagging issue other than re-install?
I recently installed Autocad 2014 with Carlson Survey 2014. When I use Etransmit or file conversion i get a Fatal Error. when i uninstall the civil 3d object enabler, the problem goes away, but i need the object enabler and i need to convert files. Is this not a major issue that Autodesk would consider important enough to address, or is the object enabler minor in comparison to other issues?
View 4 Replies View Relatedis it possible to save 3dsmax 2010 file from 2014?
View 3 Replies View Relatedmy laptop has been stolen and I had to buy a new PC...The new one is a windows 8, therfore, I had to install revit 2014....the problem is that I have been working on a graduate class project using revit 2012, and now revit 2014 will not open the files I built on revit 2012...I have only 10 days to rebuild what I have been working on for 3 months!!!...is there any way to open a revit 2012 on 2014 or at least convert it to work on 2014.
View 1 Replies View RelatedSuddenly Maya's import/export/open file dialogue box has become extremely slow, taking forever to browse thru folders, freezing in the process.
This is independently of file/scene size. Specs are Ok. CPU i7-4930k, 16gb RAm, Geforce GTX 780, running windows 8.1 with a Kingston SSD and a second 3tb Caviar Green HD.
So for some reason when I open maya and try to open a file or create reference the window doesn't pop up and I can't click anything else whenever I try I hear a ding sound. I've tried uninstalling and reinstalling.
View 2 Replies View RelatedI'm not sure what I am doing wrong but when I go to import a .wav file it's greyed out.
View 1 Replies View Related