Undo Command still turning off (disabled) constantly even after dumping the temp folder, and the turn off, turn on solution does not seem to work either.
Any solutions to this nagging issue other than re-install?
Undo has been disabled in order to prevent undo file overflow...
Is there anyway to increase the Undo capabilities.
I got the first attached message regarding UNDO command which I ignored. The second attached message then came and my UNDO command was frozen. I lost a lot of work done after I have shut down and restarted my computer.
Who knows what I should have done after the first or the second message?
is there a way to not include zoom features in the undo command.
for instance, if i delete something and than zoom out, i have to undo multiple times to complete the undo delete.
I want to completely eliminate zoom featues from the undo command.
In attachment is a file created in AutoCAD 2010.This file contains a block in the block editor that I can no longer edit the command in the message "Numeric overflow".
View 4 Replies View RelatedHaving trouble with the display order command? It does not work when you right click or when you type in the command. It says command unkown.
View 1 Replies View RelatedI have been working on a project and illustrator and accidentally reverted the file. Is there any possible way to recover the previous file or undo the revert command?
View 1 Replies View RelatedI have made some changes to the CUII (URL....) and now when starting Civil 3D the command line stops. Hitting <Enter> bring the command line back to the "Type a command" prompt.
View 3 Replies View RelatedIs there a way to undo without zoom as part of the undo?
Civil 3D 2013
Windows 7 64-bit
Inteel 2.40 GHz 8 GB RAM
Dell T7600
I've been searching for a method to swap the pipe size of an existing Pressure Network in 2014 Civil 3d.
Is this still not possible? The size listed it's grayed out.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
I am using Civil 3D 2011, and the last 2 days I have been running into this issue. I tried google, and the most recent item google brought up was from May 2011, so I am coming here.
I am trying to import a tab from another drawing, and it does not matter which tab or what drawing, I am getting this issue.
How the order of the list of Point File Formats is controlled?
We have a large list of formats predefined for doing coordinate transformations between various coordinate systems, but there does not seem to be any logical order to the list of formats.
Can I change the order of the list?
why Undo might disable DocumentCollection reactors?
It has something to do with me undoing the annotation scale as when I remove the line
db.Cannoscale = tstAnnoScale
The problem doesn't occur.
Before I upgraded to AutoCAD 2014 (was using 2012) when I used the MOVE command on 3D geometry (while using the Realistic Visualization) I could see one object move into another. Like, moving a cylinder into a box to represent a button, and I would see it slowly sink into the box as I moved it further and further along.
In 2014, the object I am moving will REMAIN ON TOP visually of all other geometry until it is completely inside the other geometry (at which point it disappears completely). It's hard for me to then judge just how much of it is sticking out during the MOVE command. Once I complete the move command, the proper visualization order is then shown.
In other words, if I have a 10 inch cylinder, and I'm trying to move it into a box so only 2 inches sticks out (as a visual guesstimation), currently I would see ALL 10 inches of the cylinder whether part of it is inside the box or not, until I complete the MOVE command.
I need to be able to roll back my variables if user apply an UNDO. Let's say.
Myinteger =1
Startstransaction
........
trans commint
Myinteger=2
Startstransaction
.......
trans commint
Myinteger=3
if user does undo 2 times the Variable Myinteger keep the value 3 . I want it back to 1. How?
I am working on a lisp to scale drawings of various sizes to a predetermined size. After the lisp has run and scaled the drawing, the prompts for base point and reference point run a second time. How can I get this to run through once? I think it has something to do with the way the reference length is being entered. The base point and first reference point are the lower left corner of the drawing, while the second reference point is the lower right corner.
(COMMAND "SCALE" "ALL" "" (SETQ A (GETPOINT "
SELECT BASE POINT :")) "R" A
(GETPOINT "
SELECT REFERENCE POINT : "))
"1'-5"")
in this command how would you put the Undo option on there erase the last line and if you want to keep eraseing the lines
(defun c:gls ();keeps drawing guide lines at any angle
(setq an (getangle "
Pick an Angle:"))
(foreach pt '(a)
(while (set pt (getpoint "
[Code] .....
I have a macro that automatically creates a Detailed view on a sheet. It works on 2 input's:
- mouse click 1 (set's the target to be detailed)
- mouse click 2 (set's the location where the balloon should be)
The code works fine. But sometimes the user will start another command, or restart the same command, while it is still running. This off course gives all kinds of problems.
Is there a possibility in VBA to prevent the user to start another command while this command is running?Or is this problem a part of the clicking itself?
Here is my (it uses a Class Module called: clsGetPoint, see code below)
Sub AutoDetailedView() On Error GoTo ErrorManagment '(error handling 2013/02/18) 'step 0 Create a transaction. -> for 1 undo command Dim oTransMgr As TransactionManager Set oTransMgr = ThisApplication.TransactionManager Dim oTrans As Transaction Set oTrans = oTransMgr.StartTransaction(ThisApplication.ActiveDocument, "AutoDetailedView") 'step 1 Select a drawingView 'Set a reference to the drawing document. Dim oDrawDoc As DrawingDocument Set oDrawDoc = ThisApplication.ActiveDocument 'Set a reference to the active sheet.
[code].....
I am running Inventor 2012 sp2.
Even with a simple IPT that only has a handfull of features, at times it takes a long time (3-5 minutes, sometimes longer) for Inventor to execute a undo or redo command.
Undo file size setting in Application options is set at 1MB (which is teh same setting I used in previous versions).
how do I re-order or change the order of images within a file?
View 2 Replies View RelatedWorking in Illustrator CC (latest version) and my undo key command is going back in time and undoing stuff I did earlier in the file. I'm on a Windows 7 machine.
View 3 Replies View RelatedWith the code below the draworder is not retained , does anynone knows how to retain the draworder in a .net copy command?
Function MaakKopie(ByVal objIds As ObjectIdCollection) As ObjectIdCollection
MaakKopie = New ObjectIdCollection
Dim doc = Application.DocumentManager.MdiActiveDocument
Dim dwg = doc.Database
Using doc.lockdocument
Using transactie = doc.TransactionManager.StartTransaction()
[Code]....
im a noob at photoshop, i just started a few days ago. (use it to texture for 3d stuff) and im getting a few problems with it.
the main problem is that none of the command keys are working (stuff like Ctrl + Z for back and Ctrl + Y for redo) also some other commands are not working. Does anyone know whats going on?
Im trying to use the array command in lt2014, using the rectangular I can nearly get there apart from where is the old "row offset" and "column offset" buttons gone? If I don't know the offset as its on say louvre blade block by others I just want to snap to 2 points to set the distance. How is this done with the new array command?
View 5 Replies View RelatedC3D 2013 64 Bit, Win 7 Pro 64Bit
When I use the open command in C3D the file date is incorrect for a file. I also have a explorer windows open and it shows the same file with the current date.
This file is located on my local hard drive. C3D shows 11/15/2013 for the date the actual date of the file is 11/26/2013. Even after a save it's still wrong. My isavepercent is set to 0 .
My company upgraded our AutoCAD from 2007 to 2009 this past Monday. I'm getting an error message when trying to change the order of objects in model space.
Command: Unknown command "AI_DRAWORDER". Press F1 for help.
Command: Unknown command "FRONT". Press F1 for help.
I want to know if I have understand this correctly or not: layer previous undos the last change in layer related command. Then If my last action is on layer, unod command will do the same. layer previous advantage is when you want to perform an undo which is not your last action.
View 0 Replies View RelatedI have a Command Method which has a loop that opens and commits transactions until the user is finished with it and exits.
I would like each transaction to be undone separately but the undo command undoes the CommandMethod (along with all the transactions that occurred while in the loop)
Do I need to use the COM StartUndoMark and EndUndoMark to get this working?
For some reason when I start up Inventor 2014 it is preset to the centerpoint command. How do I change this to where it will not automatically do this?
View 2 Replies View RelatedI am running Autocad 2014 on a Windows 7 machine. Everytime a use the open command Autocad appears to freeze. I can clear the freeze by hitting the escape key. The only way I can open drawing files is to use windows explorer and click on the file I want to open.
View 7 Replies View RelatedNoticed a change in the trim command between 2013 & 2014?
In 2013 (with out selecting trim all) the trim line didn't have to intersect the line you wanted to trim. We just upgraded to 2014 and I noticed that if I want to trim a line that the lines have to intersect. A line that doesn't intersect with the selected trim line will not trim.