How the order of the list of Point File Formats is controlled?
We have a large list of formats predefined for doing coordinate transformations between various coordinate systems, but there does not seem to be any logical order to the list of formats.
Can I change the order of the list?
I am developing an application for C3D using 2010 vb.net. How to build a list of Point File Format names using PointFileFormatCollection and PointFileFormat methods? How to extract the names from PointFileFormatCollection.
View 5 Replies View RelatedWe installed C3d 2012 a few months ago. When importing or exporting point I need to select the point file format each time. In previous versions, since we almost always use the same format, once you selected the format and imported/exported points it was selected by default the next time you imported/exported point. Since switching to C3d 2012 we have has issues of wrong format being selected for export (probably import also, but those are probably caught by the user themself).
I have tried creating a new format starting the name with an underscore as we do with the most common styles so that it would be listed at the top of the list. This did not work. It seem to me that the only solution is to delete all other formats to insure the correct format is seclcted. This will cause a problem on those occassions when another format is required.
Is there a way to remove some of the "save as" file formats from the list (when saving a file as...)? After numerous years in my field, there are a number of file formats I have - and probably never will - need to save my files as. If I could remove some of them, then it would speed up my workflow (so that I don't have to scroll down every time I save a file).
View 6 Replies View RelatedFirst time importing into 2012-have csv file that I imported. Coordinates land in right spot. Local system-No transformations/State Plane zones attached. When I look at them with tracking everything is okay. When I export the points they are the same I imported.
When I list the points they are way off?
how to get the corridor list in toolspace prospector tab to put the corridor list in alphabetical order? It seems to put them in order as you make them and will not use alphanumeric. See what mine is doing in the attached photo.
View 4 Replies View RelatedIn Civil 3d 2013, my points appear as follows with Point # on top, elevation in the middle and description at the bottom.
But when I drag the label, it changes the order of the labels to Description on top, point # in the middle and elevation at the bottom.
How do I make the dragged state labels appear in the same order as the first picture?
Also, how can I keep the colors from picture #1 (red, yellow, green) into the dragged state labels as well?
I have some blocks (different exit signs) in a drawing. I want to make a table or excel sheet that sums up the number of equal blocks in the drawing. How can i make this?
I want to connect this tabel to excel 2010.
I use AutoCad LT 2012.
I just had an internal request for this and I had to look it up. So I'll share what I found and have a place to find it myself next time.
One way to do it is to select a COGO point to bring up the COGO Point Contextual menu tab. In COGO Point Tools you can select List Available Point Numbers.
In Civil 3D 2013, in the Toolbox tab, I go to Report Manager, and select the Points_List, which then creates an HTML file.
I open it up in Chrome and when I print it, part of the point information at the bottom of Page 1 is cut off and shows up at the top of Page 2.
Is there a way to fix this?
Using 2010 Civil3D and trying to use "Reports" to print a point list and I am getting error:
Export LandXML is currently is currently not supporting the following drawing units:
Millimeters, Centimeters, Decimeters, Inches.
I have used the unit command to make sure I am in feet. Niot sure what else to look at.
Is there any way to change the format of Lat/Long in a C3D point list display from degrees, minutes, seconds to decimal degrees? I have looked pretty hard, but can't find anything. The geodetic calculator only does one item at a time, I think. Any plug-ins out there? I suppose this could be on a wish list as well.
I am using R2012.and have ended up manipulating point values in Excel-not a quick way of going about it.
I would like to modified the existing pointlist.xsl.
I would like to use a different font and adjust the text heights smaller, like a 8 pt. for the points, 12 pt for the heading and 6 pt for report data.
I do not see any text size in the file, so how do change these.
Also are there any other point list report available?
I followed the hint of PSP X4 to search the "List of supported RAW formats" on the Corel website. I only find a list for PSP X3 and in this list my camera (a Panasonic Lumix GH-2) isn't listed. Is there any newer list of supported RAW-formats / camera-types and if not, is the GH-2 supported and is there any lens specific correction data in X4 to auto correct the raw files?
View 1 Replies View RelatedUndo Command still turning off (disabled) constantly even after dumping the temp folder, and the turn off, turn on solution does not seem to work either.
Any solutions to this nagging issue other than re-install?
I have a surface, to which I've added data from a ENZ file. No problems - I had a workable surface. I want to be able to work on the drawing at home as well as work. So I brought home the DWG as well as the ENZ file thinking that if both were in the same directory, it would work OK. But I get an error saying the Point file can't be found. I can't see any way to make the file reference relative, rather than absolute.
View 5 Replies View Relatedi have any problem about export point from dwg to *.txt file.i have point file *.dwg from my friend,,but i confused why that point can't export, show warning "No point were transferred from the source" point is in layer 0...I attach the dwg file.
View 5 Replies View RelatedI am trying to create a form, so that my designers can pick their parameters when they first start a new part.
For this form I have created a multi-valued parameter for them to select from.
My issue is, why does Inventor not list fractions in the correct order.
What I would like to see:
1/8"
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
What Inventor lists:
1"
1/2"
1/4"
11/16"
13/16"
15/16"
3/8"
3/16"
5/8"
5/16"
7/8"
7/16"
9/16"
Is there a way to get Inventor to list these parameters in order of value?
I have all of our .pc3 files on a server, and have created them in the order I would like to see them, however they come in a random order. I have moved them out of the folder, and back in the order I want with no luck. I tried renaming them with numbers in front, and then with letters in front to try and populate the list in a certain order. I only have 16 .pc3 files and MAXSORT is default at 6000.
We are using page setups as well which are not a problem, but the occasional time we need to print to a specific .pc3 file gets annoying having to sort through the list to find the one we want.
how do I re-order or change the order of images within a file?
View 2 Replies View RelatedI need to get the layout list in reverse order. How to do this? My plotter outputs prints face up and I wind up with a stack of drawings in reverse order - If I can cycle through the tabs in reverse order they will wind up in the correct order in the print room!
View 9 Replies View RelatedCustom Hatch list in ACA 2013 (64 bit win 7) shows the list of hatches in a completely random order..ie. not alphabetical.
View 9 Replies View Relatedi have carlson survce in data collector that uses crd files .can civil work with those crd files?so far i used the carlson civil suite with autocad and i am thinking to try the autodesk civil.
can i use those files ? import or export from civil3d?
how to show point labels on the points I imported from a .shp file. I used MAPIMPORT and brought in the associated object data but I don't know how to get it to display in my drawing.
View 7 Replies View RelatedIs there a way to re-order the point file format listing for points on the settings tab? I have tried everything and it will not change the order of the listing.
View 3 Replies View RelatedI am new in using AutoCAD Civil 3D 2013. I used ArcMAP 10.1 to create a .mxd MAP of 4 points/locations - each point/location has the values of SampleID, XYZ-coordinates, Depth, ChemicalName - see the attached file for details.
I used the ArcToolbox to convert ArcMAP to CAD in the GeoProcess, obtained a DWG, and saved it in a folder of my C:/Temp/CDC_ArcGIS-GeoDatabase folder - see the first page of the attched file. I used AutoCAD Civil 3D 2013 to open that DWG file - I played with it in the basic 3D Wireframe a little bit, but I don't know how to display the feature/object of my 4-point MAP - see the last page of my attached file. How I can display/view the feature/object of my 4-point MAP in AutoCAD Civil 3D 2013.
The background of my AutoCAD Civil 3D 2013 is black. How can I change the background color to white or other light colors?
I am using autodesk autocad civil 3D (Metric).When I am importing point from text file it comes with different scale which is not to 1:1.Actual scale is 1: 3.280 which is exactly equal to 1m :1 ft ratio.
So, my guess is, X,Y,Z coordinates are importing to autocad civil 3D is in feets and measured distance points in meters.
I can't find any of my fonts since they are not in alphabetic order. I don't have many fonts installed, cs5.
View 6 Replies View RelatedI've always opened files using File>open. I use the list view so that all filenames appear in alpha/numeric order regardless of the file extension(.psd, .jpg, ect). Sometime within the past week this has stopped working. The list now is ordered by the extension type - all .nef, all .psd, all .jpg, ect. Does anyone know how to get the original alpha/numeric order back? I can do it temporarily by choosing details, click on the filename column and then choosing list but this only works once. The next time I use File>open, it's back to ordered by extension type.
View 5 Replies View Relatedi made a survey, about 2000 points with my TSC3R6. I exported my CSV file to a PNEZD file with comma seperated. When i try ti import the file (CSV then i made a .txt), C3D tells me "no point file format match found". Then I opened the txt file, searched for any error that would not let me import my points. The only thing i have found would be the description of my points that sometimes had a space between 2 words (ex: bt balast and ht balast) so i changed it to bt-balast and ht-balast. i looked further and didnt found anything else. heres a sample of my txt file:
11251,5038721.804,370118.600,52.877,69
11252,5038722.437,370118.327,52.980,82
11253,5038725.381,370117.058,54.235,81
11254,5038725.967,370117.395,54.325,bt-balast
11255,5038727.637,370116.899,54.860,ht-balast
11256,5038728.983,370116.602,54.857,balast
11257,5038730.043,370116.150,54.839,ht-balast
11258,5038731.524,370115.635,54.345,bt-balast
11259,5038731.763,370115.674,54.308,81
11260,5038733.529,370114.961,53.606,82
11261,5038734.460,370114.525,53.505,350
Now i have to draw something but i cant even find why importing points fails in C3D.
some usefull informations maybe:
windows 7 32bits SP1
autocad civil 3d 2013 (not yet activated, next week)
I think this should be an easy thing to do, but I am having problems figuring it out. I need to repath the location of a point file being used in a surface. My surface will not rebuild because it can't find the point file originally used. Drawing was used on a different computer system, so the point file directory is now pointed to the wrong path.
View 7 Replies View Related
