I just had an internal request for this and I had to look it up. So I'll share what I found and have a place to find it myself next time.
One way to do it is to select a COGO point to bring up the COGO Point Contextual menu tab. In COGO Point Tools you can select List Available Point Numbers.
I have several lifts of dirt. I have 50 shots on each lift, but the shots on each lift are in different locations. I have been told to have each lift on a seperate layout and each layout list each shot starting at 1. Is there a way I can show Lift 1 with point numbers 1-50 and Lift 2 with point numbers 1-50 in the same dwg?
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
I have subroutine that retrieves a list of detail numbers in a drawing. Sometimes there are missing numbers. I am looking to find a list of any missing numbers.
Example -
(setq List_DN (list 1 2 3 5 6 7 10 11 12 17))
Missing numbers are - 4,8,9,13,14,15,16
I would like a subroutine to take the List_DN are return the following missing numbers as text
(Get_Missing List_DN)
return
4,8-9,13-16
First time importing into 2012-have csv file that I imported. Coordinates land in right spot. Local system-No transformations/State Plane zones attached. When I look at them with tracking everything is okay. When I export the points they are the same I imported.
When I list the points they are way off?
I'm trying to import a GPS coordinate file where our Surveyor has used both Points Names (Alpha-Numeric) and Point Numbers. see below. I have setup a Point File Format for Pname, North, East, Elev and RAW Description, to import this comma separated point file. The problem is that Civil 3D does not want to seem to use a numeric point name as a Point Number, instead the number is used as a Point name and Civil 3D assigns a Point number from the next availible point number. Is it possible to automatically, when the Point Name is a numer only to also assign it the same value as the Point Names?
I would really want Civil 3D to allow users to use Both, Point Names without assigning a Point number.
CP73,621590.855,846017.619,13.87,10
CP499,620699.227,845545.947,14.21,10
7738,621525.744,846624.727,15.1,10
CHK7737,621860.59,845594.224,14.611,10
8530,621051.442,844635.981,7.39,93
8531,621055.237,844586.744,7.068,93
8532,621054.167,844531.929,6.929
What I wish to do is to assign a set of points a sequence of point numbers (or custom properties) of my choosing. For example, I have the following points:
100
102
104
105
107
I wish to assign point 100 -> 1000, 105 to 1001, 107 to 1002, 104 -> 1003, and 102 ->1004. Basically, I am looking for a command or utility that implements the "TCOUNT" (using select-order) command, but for Cogo points instead of text. The renumber points command appears to only work with offsets, and does not eliminate gaps. I can sequence the points if I select the points I want, then copy them -> set duplicate points to sequence from the range I choose, but this does not allow for reordering of point numbers. I tried individually selecting them in the order I wanted, but didn't change the order in which they were numbered.
Alternatively, I can leave the point numbers the same, and assign a user defined property that I can use to sequence the points in the order of my choosing. However, I'm not sure how to go about assigning the sequence I wish short of typing in each value individually; obviously non-ideal.
A third possibility that presented itself to me was to create new, correctly sequenced points that overlap exactly with the old ones, and then somehow merge the two sets together. Would there be a way to merge the old points and the new ones based on the fact that the two points have the same X-Y coordinates? Preferably done in CAD itself; the last resort would be to export both sets of points out to excel, then do some fancy manipulation in excel, then reimport into CAD.
I know that there is a limitation on the numbers of points added to a surface from a point cloud. But I'm curious how Civil 3D determines which points to exclude from the surface. Is there a special alorithm/criteria the software uses?
View 1 Replies View RelatedThe command for Creating Lines by Specifying a Range of Point Numbers makes 3D line segments. Is there an option to make a zero elevation polyline running through cogo points that are 3D (the 3D line segments occur even if the cogo points are set to flatten elevation)?
View 5 Replies View RelatedIn Civil 3D 2013, in the Toolbox tab, I go to Report Manager, and select the Points_List, which then creates an HTML file.
I open it up in Chrome and when I print it, part of the point information at the bottom of Page 1 is cut off and shows up at the top of Page 2.
Is there a way to fix this?
I am developing an application for C3D using 2010 vb.net. How to build a list of Point File Format names using PointFileFormatCollection and PointFileFormat methods? How to extract the names from PointFileFormatCollection.
View 5 Replies View RelatedHow the order of the list of Point File Formats is controlled?
We have a large list of formats predefined for doing coordinate transformations between various coordinate systems, but there does not seem to be any logical order to the list of formats.
Can I change the order of the list?
Using 2010 Civil3D and trying to use "Reports" to print a point list and I am getting error:
Export LandXML is currently is currently not supporting the following drawing units:
Millimeters, Centimeters, Decimeters, Inches.
I have used the unit command to make sure I am in feet. Niot sure what else to look at.
Is there any way to change the format of Lat/Long in a C3D point list display from degrees, minutes, seconds to decimal degrees? I have looked pretty hard, but can't find anything. The geodetic calculator only does one item at a time, I think. Any plug-ins out there? I suppose this could be on a wish list as well.
I am using R2012.and have ended up manipulating point values in Excel-not a quick way of going about it.
I would like to modified the existing pointlist.xsl.
I would like to use a different font and adjust the text heights smaller, like a 8 pt. for the points, 12 pt for the heading and 6 pt for report data.
I do not see any text size in the file, so how do change these.
Also are there any other point list report available?
For some reason the item numbers in my parts list are blank. All the other information populates.
I've gone to the assmebly and varified that the BOM tabs are active and there are numbers in there.
If I inser the parts list as 'legacy' it works fine.
I can't use the renumber function, it just makes all theh item number boxes go yellow in the parts list box,
Inventor 2013.
According to the keyword list panel, I have one photo assigned two words as keyword, but I don't have such a photo in my catalog. How can correct the numbers appearing near keywords in the keyword list panel?
View 2 Replies View Relateddoes number->string have format options? What is the equivalent of "printf" in gimp tinyscheme?
I am scripting adding axes to an image and need to control of format of floating point numbers that will be passed to gimps text generation functions.
Civil 3d 2012..I used 3d orbit, it crashed. My points, point groups and newly updated description keys are gone.I have looked at all my backup files etc, and they do not want to display.
View 4 Replies View RelatedIm still new to Civil 3D and i would like to know how to connect inported points using 3D polylines. I imported my points from Excel in a PNEZD format. How do i get the 3d poly line to snap to my points so I can Connect them? someone mentioned using a feature line to connect the points but im not sure how or what that would do.
View 3 Replies View RelatedI have a database of points I am trying to import, and the point data for each point includes a hyperlink. I've created a set of custom User-Defined Property Classifications for all the data types in the point database, and I've created a point file format to use to import the points.
It's a database of existing curb ramps, the data includes things like widths, slopes, some text, and a hyperlink to the Google Streetview at each ramp. I've created a custom point label that will show the data I need to see at each ramp.
All goes great except that the import fails because of the hyperlinks. I've tested it by removing the hyperlinks from a small test portion of the data set, and the test points are then successfully imported. I suppose I can delete the hyperlinks from the entire database, but if there is a way to include the hyperlinks in the point import I would prefer that.
Win 7E 64-bit, Intel i7, 12 GB
C3D 2012
In uploading the Point input data into the AutoCAD Civil 3D 2013 software program, is it possible for me to add more Point Attribute items after Point Number, X, Y, Z? I need to have the chemical results/data attached to the (sampling) Point that has the Point #, X, Y, Z - like Point Number, X, Y, Z, Arsenic, Lead, Mercury in the input .txt (or .csv) file.
View 9 Replies View RelatedI am trying to link my parts list to a drawing however all balloons have different numbers.
I open the assembly and check everything out from vault I open my bom and change item numbers. When I get back to my drawing and apply for auto balloon I get completely different item numbers in my balloons. We just updated our software to a new 2012 version so it's maybe something with set up.
Is there a way to sync callout numbers to correspond with note numbers. When I add or delete notes in my drawings it takes to much time to update the callout number in the drawings. I need to figure out a way for the note and corresponding callout to change at the same time.
View 6 Replies View RelatedHow to set a default point style for point groups? Whenever I import survey points, I always put them into their own point group, so I can display each day's worth of survey data differently. For some reason, the point style always defaults to a certain style (our control point symbol). I'd like it to default to Basic, so I don't have to change this every time. Is it a template drawing setting somewhere?
View 5 Replies View RelatedC3D 2012
Is there a 'property' to use the Point Group Name. I need it in the Point Table Style: Title text like this:
The default Insertion Point of a part list is its" range box.maxpoint",but I need to make its "rangebox.minpoint" as its InsertionPoint . My code to insert the part list is as follows :
I have tried using the code " oPartsList.RangeBox.MinPoint.InsertionPoint = True" , imitating "oSketchLines(1).EndSketchPoint.InsertionPoint = True" ,but without luck .
I am trying to get point 1234 to show a label that says Point #1234 and then in a grading plan have that same point show up as a spot elevation. I have tried making two point groups "Point #" and "Spot Grades" which include the same points in them with two different label styles for each group, however the point seems to only want to take one label style at a time.
C3D 2012
Win 7 x64
8 GB Ram
Quadro K4000
Is there any method in Civil 3D change the points number?
View 9 Replies View RelatedWe use tags on lines labeled L1, L2 etc... for roads and pipelines (for legal/right of way purposes). We may have multiple lines to describe (differernt section/land owner) and need to start back at L1.
Is there a way to automatically start back at L1 rather than it starting at a higher number and having to reset the number one at a time? Get's quite tedious when you have multiple lines needing number with say lay 20-30 segments.
why the "cut/fill" numbers are all at zero in my report? All the offsets and the design elevations show just fine....
View 9 Replies View RelatedI creating plan and sections from my model. I went through my Create View Frames, and created my sheets fine. But one thing I cannot seem to fix, I am starting from Sheet 10, not sheet 1, so I need my match line to start at sheet 10, then up from there. Whats the setting I need to change for this? I have set all counters to start from 10, but the first match line still says sheet 1 i have attached an image of the matchline.
View 6 Replies View Related