AutoCAD Civil 3D :: View Frame Sheet Numbers?
Apr 24, 2012
I creating plan and sections from my model. I went through my Create View Frames, and created my sheets fine. But one thing I cannot seem to fix, I am starting from Sheet 10, not sheet 1, so I need my match line to start at sheet 10, then up from there. Whats the setting I need to change for this? I have set all counters to start from 10, but the first match line still says sheet 1 i have attached an image of the matchline.
View 6 Replies
ADVERTISEMENT
Apr 13, 2013
I was wondering if a template used to create frames using the create frame tool in autocad civil 3D should have the same datum, projection as the files that are being referenced? Or is the template independent from from the reference files and does not need any datum, projection setting applied to it?
View 4 Replies
View Related
Dec 20, 2013
I'm using C3D 2014.
When I create layouts using the "All layouts in the current drawing" option, the north arrow does not align to the viewport rotation.
But when I use "Number of layouts..." and "All layouts in one..." options, the north arrow block aligns correctly.
View 2 Replies
View Related
Mar 8, 2012
How and where can I adjust the station precision of the view frame start and end station. I am choosing snap to nearest foot station but I am getting 1+00.00. I would like 1+00 in the label. I am setting to start end to the layout name and mapping that to the current drawing field in SSM and do not have precision control there either.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
View 7 Replies
View Related
Nov 13, 2012
How i can Set Automatic Height in the Sheet Profile View ?
View 9 Replies
View Related
May 26, 2009
In the sheet profile view the sampled(existing ground) profile for all 3 profiles does not generate the correct linetype(sample 1). The design drawing that I created the individual sheet from displays it correctly (sample 2). The preferences show it is generating(sample 3), it’s just not displaying correctly in the sheet itself.
View 8 Replies
View Related
Jul 9, 2012
Every now and then I'll have a sheet that will not accept placement of another model view from the sheet set manager. (There are usually two or more model views already on the layout). Every attempt will cause AutoCAD to crash. I run recover and audit and the problem persists.
Today I did something differently. I added a new layout, and successfully placed the model view on that layout (I accepted the condition that the layout was not part of a sheet set). Then I went back to the layout I really wanted the model view on and was able to place it without any problem. The significant difference I can see is that I usually have only one layout (I typically delete layouts I don't use which leaves only one layout). It seems to me that having one layout and only one layout while attempting to place a model view on it could very well be the cause of this random crash problem. I have not been able to confirm this yet but the next time I crash trying to place a model view, the first thing I will try is to add a new layout.
---------------------------------------------Signature--------------------------------------------
Civil Design Professional Since 1983 (Intergraph), AutoCAD since 1989
It is said that a fool's voice is known by multitude of words... I'm just writing this stuff instead of saying it outloud... that's my loophole.
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
View 1 Replies
View Related
Jul 26, 2012
I come across this problem from time to time and generally either just ignore it, if the detail is destined for in house manufacture, or alter it in autocad if it's destined for exterior suppliers.
Our guard frames are manufactured from extruded aluminum section (made by a company called palletti) I have when needed created a new frame generator frame member for each new x-section that we wish to use. I then draw a 2d sketch for the base frame skeleton and then a 3d sketch for all the frame work above. This I then use in an assembly to create the framework. This framework assembly then goes into a second assembly where the framework is then adorned with all the accoutrements that make up a guard frame that we can then order as an assembled frame, panels feet, hinges et al.
When placing the views for the detailing of the second assembly sometimes the view will show the wrong length for one or some of the frame members.
;note how the left and right views are different and how some of the frame members are elongated on the lh view.
I'm guessing its because of the home grown frame members but all seems to work well other wise and this only happens infrequently.
HP z210 16Gb ATI FirePro5800
Autodesk Produst design Suite 2012
View 1 Replies
View Related
Jan 17, 2013
I have several sheets w/in a drawing. Some of the sheets are titled sheet 2A, 2B, etc. I'd like to be able to do this w/o needing several title blocks. what becomes sheet 3 is now sheet 5. How do I offset the sheet numbers?
View 2 Replies
View Related
Apr 18, 2012
I've made a big calculation in a Pipe Stress Analysis program and the program has auto created 10 autocad drawings that is used to find points in the system.The problem is that the program has random numbered (with no intelligence) and now I have a big report which for example points at a number some where in the 10 drawings, which is hopeless to find.
Can I somehow:
1. Find all numbers in this drawing.
2. Put them into Excel.
3. Sort them after size.
4. Add an extra column which tells which drawing I can find the number.
5. Last put all the numbers from all the drawing into one Excel sheet and sort them after size, now I have a number index, so I can find which number is in which drawing.
Can Autocad find all numbers in a drawing and let me copy them to Excel for editing?
View 4 Replies
View Related
Mar 1, 2013
How to etch numbers in sheet metal? Can I use text in an ipt and extrude this?
Is it possible to save as dxf with etch lines in a different color? I didn't find a possibility to change color in the Layer DXF Export Options or must this be done in Autocad?
View 5 Replies
View Related
Jun 7, 2012
I am trying to add sheet numbers to my template for my document. I know I have to use the Sheet Properties, Sheet Number then Drawing Properties, Number of Sheets but I cannot remember how to do this? I am using IV 2010. There used to be a Properties Field icon, but now I cannot find it? I RMB on the title block, select "Edit", then selected the location of the property, then selected Sheet Properties, Sheet Number, but nothing shows up.
View 2 Replies
View Related
Feb 10, 2013
I'm fairly new to Autocad and getting used to using sheet set manager. What I'm experiencing is, when you insert a model view it brings in an xref of that model, but i'm then unsure how to add additional xref models into the same view.
For example I have a separate ground floor plan file and OS data file which I want to show in the one sheet view without nesting the OS data to the original ground floor file.
View 7 Replies
View Related
Mar 3, 2011
I am having trouble putting sheet size and scale together to find out the drawing area. For example, if the scale is 1"=2" and the sheet size is 17"x11" what would the drawing area be?
View 2 Replies
View Related
Jun 21, 2013
Is there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies
View Related
Sep 21, 2011
I have never gotten this to work, but had put little effort into it until recently. Thus far I have checked my project standards to make sure "match sheet views to view" is checked to "yes".
In both View drawing and the sheet- VISRETAIN is set to 1.
the VPLAYEROVERRIDESMODE is set to 1
I am working on drawings that are in my current project through project navigator. I am using ACA 2010 and not sure what else I need to do. I turn off all the unwanted layers in the view drawing, then create a sheet and xref in the view to model space- all the layers reset, and I again have to turn off all the unwanted layers. If I change a layer color in the view drawing, it does not change in the sheet drawing upon save and refresh.
I hate wasting time repeating the same task over and over....
View 2 Replies
View Related
Aug 11, 2012
How can I get dimensions and stair well in view to show in sheet view? Basement & 1st fl are ok but 2nd floor is not.
See attached screen shot.
View 2 Replies
View Related
Mar 13, 2012
I'm currently learning Inventor and going through the tutorials. At present I am learning about drawings. For some reason the scale (e.g 1:1) and dimension numbers do not appear in the drawings. I can see the arrows that make the dimensions but that is all. How to turn these on? I have tried every setting I can find but it appears that I can't figure this out.
View 1 Replies
View Related
Aug 20, 2010
I have used earlier versions of VS in the past with virtually no issues , last version wbeing VS11 Plus. I recently "Upgraded" to VS Pro X2 and am trying to burn my first project with it. During the share stage, trying to make a DVD I get the message "Some chapter entry frame numbers exceed the total frames" and NO I did not edit the project after adding the chapters in the share stage. Seems from google searches that this is an old issue for which Ulead issued a patch in earlier versions, but it is back! One post suggested creating a video file of the whole project then importing that without creating a new project then sharing it and adding chapters.
I tried that and found that the audio for the second half of the project got dropped. If you press Info on the DVD player it displays Dolby 3/2 on the TV screen, but the AVamp shows no Blue Dolby multichannel light and detects no audio streams available. This dropping of audio occurs at a transition between two clips in the original project. The "missing" audio is present in the mpeg file created, and you can hear it if you play the file in the "Edit" tab. It simply does not get carried over to the disc burn. I tried twice. ANyway, that is a secondary issue and I'm not too bothered about that. I would much rather get a fix for the Chapter frame numbers issue and thus avoid the video file creation process.
I have tried taking a few frames out of each clip and re-rendering the whole project again to no avail. I have also tried deselecting two pass conversion.
View 14 Replies
View Related
Jun 5, 2013
This is regarding a error message by Video Studio Pro X5 understanding a fault message which I got after creating a DVD map. This is the original message in Dutch: "Sommige startframenummers van hoofdstukken zijn groter dan het aantal frames". 533:-2147216477:0 Translation: "Some start frame numbers of chapters are greater than the number of frames"
This was also discussed here - but I can not understand the solution: viewtopic.php?t=24055&p=120629
The situation: I have all the same video files (H.264, 24 bits, 25.000 f/s) [worked with this kind of files a couple times and worked alway very well] I have added some tekst and pictures. Total length of video is 01:50 hour. Starting the procedure DVD creating, with burning the DVD folders on my harddisc. Afther the burning proces I got the fault message.
After creating the DVD map I got the fault message (as describbed above) and found on my harddisc the VIDEO_TS folder with 5 files VTS_01_1 till VTS_01_5. The total time of these loose files is ca. 76 minutes. So I missed a hughe chunk. I got the same fault message when I have created chapters within the videofile but also when I created chapters later at the video menu.
When I do not burning a DVD folder but select creating a video file (DVD-video) than I get separated end files instead of just one big file. Maybe this has the same cause?
View 14 Replies
View Related
Jun 23, 2013
In the AutoCAD layout, the View port cannot always be linked to the drawing view. How will the viewport is linked to the drawing view.
View 1 Replies
View Related
Apr 17, 2012
How can I publish a sheet metal in the frame generator? I can not set the base extrusion in the structural shape authoring being this a sheet.
I am attaching the frame that I'm not getting published.
View 1 Replies
View Related
Nov 6, 2012
How people deal with multiple revisions of one sheet with sheet set manager, basically I want the cover sheet of drawings to have a list of drawings including the revision letter and revision date and on each individual sheet keep track of historical revisions
There is the current sheet revision and date fields.Does everyone usually just update these and manually keep track of historical revisions else where in there title block?
View 6 Replies
View Related
Feb 22, 2013
Up until now, for FG I've always created a part with just a sketch in it. I insert that in an assembly and use it as my frame generator driving part. Now, I've started creating a solid instead of just a sketch in the part and using its edges to attach frame members. Picture a cube. I really need to put sheet metal on the cube and have my frame on the outside of the sheet metal. I was setting up a parameter for the sheet metal thickness and offsetting the members in Frame Generator that parameter. Now, I've accidentally discovered that I can select the outside edge of the sheet metal part to attach my frame members to. Is that a valid workflow? If it is, its a bit of an epiphamy for me. Using a parameter in FG as an offset required me to edit each member with FG and update it to get the offset to use the current parameter value.
View 2 Replies
View Related
Jan 15, 2013
I was creating a new sheet set in the sheet set manager as I have created new drawings to be added to the old one. When I do this and browse to the directory of drawings, once I hit next it only wants to create a sheet with a few drawings in the directory. There are 22 drawings in the directory and is leaving out about 18 when it creates the sheet set.
View 2 Replies
View Related
Jul 18, 2013
I have subroutine that retrieves a list of detail numbers in a drawing. Sometimes there are missing numbers. I am looking to find a list of any missing numbers.
Example -
(setq List_DN (list 1 2 3 5 6 7 10 11 12 17))
Missing numbers are - 4,8,9,13,14,15,16
I would like a subroutine to take the List_DN are return the following missing numbers as text
(Get_Missing List_DN)
return
4,8-9,13-16
View 9 Replies
View Related
Feb 20, 2012
I am trying to link my parts list to a drawing however all balloons have different numbers.
I open the assembly and check everything out from vault I open my bom and change item numbers. When I get back to my drawing and apply for auto balloon I get completely different item numbers in my balloons. We just updated our software to a new 2012 version so it's maybe something with set up.
View 9 Replies
View Related
Jun 20, 2011
Is there a way to sync callout numbers to correspond with note numbers. When I add or delete notes in my drawings it takes to much time to update the callout number in the drawings. I need to figure out a way for the note and corresponding callout to change at the same time.
View 6 Replies
View Related
Feb 19, 2013
I have several lifts of dirt. I have 50 shots on each lift, but the shots on each lift are in different locations. I have been told to have each lift on a seperate layout and each layout list each shot starting at 1. Is there a way I can show Lift 1 with point numbers 1-50 and Lift 2 with point numbers 1-50 in the same dwg?
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
View 2 Replies
View Related
Jul 4, 2012
Is there any method in Civil 3D change the points number?
View 9 Replies
View Related
Aug 23, 2013
We use tags on lines labeled L1, L2 etc... for roads and pipelines (for legal/right of way purposes). We may have multiple lines to describe (differernt section/land owner) and need to start back at L1.
Is there a way to automatically start back at L1 rather than it starting at a higher number and having to reset the number one at a time? Get's quite tedious when you have multiple lines needing number with say lay 20-30 segments.
View 6 Replies
View Related
