C3D 2013 64 Bit, Win 7 Pro 64Bit
When I use the open command in C3D the file date is incorrect for a file. I also have a explorer windows open and it shows the same file with the current date.
This file is located on my local hard drive. C3D shows 11/15/2013 for the date the actual date of the file is 11/26/2013. Even after a save it's still wrong. My isavepercent is set to 0 .
I seem to have a big (and very weird) problem with dates in Lightroom. This relates - for the moment at least - to images dating back ten years, to when I had my first digital camera, a Nikon D100.
My belief is that the photo in question, one of many, was taken at around 2pm on the afternoon of 17th April 2004. Note the following from the image (EXIF data):
- The "date/time original" shows 17/04/2002 13:58:48
- The "date/time digitized" shows 17/04/2004 23:15:29
- The "date/time" shows 17/04/2004 23:24:17
The same image in Windows explorer (see second image) shows:
> Date 17/04/2004 23:15
> Date Taken 17/04/2004 23:15
> Date Imported 17/04/2004 22:24
Given the subject matter of the image, it is 100% certain this image was in fact taken in April 2004.
How can it be, then, that the "original" shows a date two years earlier? Why would Lightroom use this field (the ONLY one showing 2002 when every other shows 2004)? And why does Explorer correctly show the date but Lightroom does not - surely if anything one might expect the opposite?
This is urgently needed to be resolved as I am making a photo book for my wife's 40th and, as it turns out, I am putting all the photos in all the wrong years!
All of a sudden I notice that when I open a file in Autocad Architecture, it shows the file creation date and not the actual last save date. Only thing I can think of is I reinstalled 3dsmax Design and I wonder if that changed something. I attached a screenshot for reference.
Building Suite Premium
Win 7, ultimate
i7 1.86ghz, 4meg ram
ATI 5730
Photoshop CS6, running on 2006 iMac, OS X 10.7.5. Opened a .tif file (which did not have a Date File Created in its file properties. Saved it as a .psd file using "save as". In Bridge, Date File Created shows 12/31/03 7:00:00 PM.
View 2 Replies View RelatedI am having an issue with drawing files. I have set views on assembly files. But on the idw file it is showing wrong views... And this is making problems when i am trying to give dimensions. I have attached jpg files.
View 7 Replies View RelatedI'm trying to print contact sheets showing the file name and date. How can I get the date to display YYYYMMDD?
View 4 Replies View Relatedit does not showing command window in civil in 3D 2011 after installing first time.How can i get it?
View 5 Replies View RelatedI've recently begun using the "DWG to PDF.pc3" plotter/printer for making PDF files of my AutoCAD 2013 drawings because it's quite a lot faster than using the "Adobe PDF" plotter/printer that I have been using up to now.
But today I noticed something very odd: After I create a PDF file using the "DWG to PDF.pc3" plotter/printer, when I go into Windows Explorer (the file manager) and click on a file to select it, the file shows the "Date Created" and "Date Modified" as being "11/27/2007 9:11 AM" even though the file was actually created today, 4/18/2013 at 3:01 PM. If I right-click the file and select Properties, the General tab shows this incorrect date and time for the Created and Modified data, as well as the Accessed data, which you can see in screen capture 1 attached.
Before you ask the obvious: yes, my computer's date and time ARE set correctly. This is as if AutoCAD has some sort of "internal" clock that's set to the wrong time, the wrong dthe wrong year, and is assigning that wrong information to the finished PDF file... very weird.
And then opening the file in Acrobat itself, when I click on the File menu and then on Properties, the Document Properties window appears and shows the data contained within the file: and it is the CORRECT Created and Modified date & time! You can see this in screen capture 2, also attached.
So it seems as if the "DWG to PDF.pc3" printer/plotter is creating the file correctly, and placing the correct Date and Time data inside the file for Acrobat's use, but is coming up with this bizarre time on a date over 5 years in the past as the data that Windows "sees" in the file's Properties.
I'm simply baffled by this. It wouldn't bother me so much except for the fact that we make many corrections and updates to files without changing or "dating" the file name, and my boss frequently asks me to sort the files within a folder by the Date Modified, so we can find the latest revision.
I've been sent an AGS 3.1 file which I'm trying to import to Civil 3D using the Geotechnical module, but keep running up against an error which suggests the date format in the AGS file is incorrect. From what I can see the format should be DD/MM/YYYY, and this is correct in the file, but Geotechnics still won't recognise it.
Is there a different date format I should be using, or is there a way to force the tool to recognise the format in the file?
Photoshop CS5.1
When I click on Open File, the window that comes up has several default columns (FileName, Date, Size, etc).
I can right-click on the tab bar and add "Date Modified" to the tabs, but I would like to have "Date Modified" be a default column whenever I open the file selector (and no matter which folder I open up).
I cannot find a way to do this. I want to know the last date I modified a file, not when it was created.
Is there a way to universally set this column as a default?
I am unable to use the file command open, new etc. I click on open and nothing happens no file box opens. As soon as you do anything else the program says not responding and you have to close it down. I can click on an autocad file in windows explorer and bring up the file this way but as soon as you try any file command such as save as the program freezes again. I am running windows 7 professional and the autocad LT 2011 64 bit program.
View 9 Replies View RelatedI have autocad civil 3d 2008 in my pc. From last 2 days I got a different problem i.e. when I am selecting open / save command from File menu graphical file select explorer is not opening just message in the command window . Previously I used to select files using graphical file explorer.
View 6 Replies View RelatedCurrently when I "export to Cad format" "dwg" the resulting file is created with the wrong date and time.
I am exporting a view of a floor plan with the naming convension "Automatic - Short" and the "Export views on sheets and links as external references" turned off. When i proceed the resulting file has a date of June 25th 2013 at 4:46pm...today is October 16th , 2013 at 9:08am...according to my computer.
I've tried multiple times over the last couple weeks and have had the same result.The weird part is if I switch to the "Automatic - Long (Specify prefix)" or "Manual (Specify name)" naming convension the date ends up being correct.
The fact that the naming convension doing this and not any of the other settings makes me think it is a Revit issue and not my computer.
I have a Civil3D file with Drawing Settings = WGS84 UTM-Zone44 North Map3D coordinate system = WGS84 UTM-Zone44 North a USGS DEM from HYDROsheds data set (tile = N40E80) also note this DEM is a folder of multiple ADF files when using FDO provider the DEM comes in just fine but it lands in the wrong location thousands of kilometers away.
When I load the same shape files into ArcMAP10 with spatial reference as WGS84 UTM-Zone44 North everything lines up perfectly.
The header prj.adf file is this:
PROJECTION GEOGRAPHIC
UNITS DD
DATUM WGS84
PARAMETERS
so how do I make it come into Map3D correctly?
When the attached shape file (change soilmu_a_a.txt to .shp) is imported using MAPIMPORT the data aligns with other imported georeferenced raster imagery (said imagery was imported using the MAPIINSERT command). If the same shape file is imported using the data connect tool it shows up in a much different location (see word document).
The drawing coordinate system code is "UTM83-18F" and the data was downloaded from the Web Soil Survey's data download with the identical coordinate system (see attached readme.txt).
I prefer to use the data connect option when importing this type of shape file because I can label them all using a theme and use stylize the data for visualization/presentation.
As an aside, I have found that data connect does not automatically transform data coordinate systems to match your drawing coordinate system as advertised. I've used the edit coordinate system to no avail; however, again when the file is imported using MAPIMPORT and saved as a drawing (with native data coordinate system) and then that drawing is queried from a drawing in a different coordinate system it seems to transform the coordinate system just fine. Is this a problem with data connect?
While working with some photos taken this summer, I noticed a strange issue where Organizer is sorting pictures by Date (using Date Created/Oldest) and showing a few pictures at the top under the correct date section (for example July 19th 2011), but then breaks to a new date section indicating July 28th 2011, in which the rest of the pictures in the folder are displaying - even though these pictures are still all from July 19th.
I've attached a link to a screenshot to make it clearer to understand: [URL]
I'm running X3 on Windows 7 Pro 64bit.
I found a curious bug in Lightroom 4.2.
If I have pictures taken after 23:00, Lightroom creates an import folder in the next day, but the dates in the files are correct.
Example: The file's date is: 29/11/2012 23:19.
However if I hover my mouse over the image in the import dialog:
The date that appears is 30/11/2012 00:19. Here's the detail:
After you import, you get the image in the wrong import folder, but the meta on the image is correct:
I've started to notice this before, but always thought of a wrong date on my camera. Just noticed that this happens with my camera, iPhone, and any other photo that has a time after 23:00.
I'm using Lightroom 5.2RC. My camera is Sony RX100M2.
Everything was working fine until a few hours ago. Then I noticed that a few shots I took late this evening were being imported into yesterday's folder. So I carefully checked what was going on, and noticed that LR import was seeing an incorrect date and time for the file! For example, below you see the date/time it sees for the first image -- that date/time is wrong.
: LR sees the wrong date/time whether I try to import from camera, from SD card in card slot, or WiFi.
Windows Explorer reads the correct date/time of the files, as does the camera, Playmemories etc. Only Lightroom is seeing a wrong date/time. I even uninstalled LR and reinstalled it, and it's still seeing the wrong date/time in import. I have also formatted my card and took new photos, but same behavior.
How Can I change wrong date and time on a picture using photoshop elements 11 ?
View 1 Replies View RelatedSometimes (atleast 2 times) when I take photos late, butween about 10-11 PM they are created in a folder with the date for the following day.
Last time this happend was yesterday (2013-06-05). Almost all photos was automaticlly in folder for 2013-06-05 for the import but 10 photos shot between 10.07pm - 10.43pm was put in the folder 2013-06-06.
Im using Lightroom 4.4 Swedish version.
Is it at date/time-proporties in Lightroom which is wrong (not Swedish-time) or what can it be?
I have just moved from v3.6 to v4.3. When using the library window, grid view, I use the filter bu selecting a specific date but images are being returned incorrectly. For example: When I select a date i.e. 25/05/2011, I have images being shown for that date but also others with a capture date of 06/02/2012. How can this issue be corrected? I have over 60,000 images to review.
View 17 Replies View RelatedLR 4.6 shows wrong Date (1988-02-07) and time after importing. Explorer shows the exact date and time of craeting the file. File type is MOV, camera Leica M (240).
View 1 Replies View RelatedI import photos direct from camera (5DII) into Lightroom 4.3 the folder automatically created in Lightroom is one day out from the date photo created. Camera, computer and metadata info of file all have correct date. Windows 8 OS.
View 8 Replies View RelatedWhen I click on File>Open The dialog box no longer has a thumnail preview. Only a small grey box hovering on the right that says "Initial View" with a check box. I have attached a snapshot of my Autocad File> open dialog box so you can see what I'm getting on my end.
If I browse for files in windows explorer and change view option to thumbnail I can see the thumbnails just fine.
I've tried everything but I cannot get back my File> Open thumbnail preview.
In Tools> Options I have the thumbnail preview settings all set to save thumbnail preview image. Nothing has changed that I know if for the thumbnail preview to go away.
It's really slowing me down not being able to have thumbnail preview in the file> open dialog box.
the user is running C3D. He can only open a drawing if its in the previously open files list or he can open with Explorer. If he clicks the open toolbar or selects open from the menu or even types it at the command prompt, nothing happens. It seems to be trying to do something because the command prompt doesn't come back unless he escapes. If he instead hits enter, he gets a message that says it can't find the file specified - even though he never got a chance to specify anything. It's not FILEDIA and he has rebooted. It's also not hiding the open dialog box behind the acad screen.
View 9 Replies View Relatedwithout reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
My Autocad Civil 3D 2008 crashed and when I restarted it and tried to open a drawing the file open or save as just brings up text in the command bar asking me to specify the name of the drawing to open. Where have my opo up boxes gone? I have had this problem before and found a code to type in which restored it but now I can't find it.
View 2 Replies View RelatedAn IDW view is showing a second iteration of a part instead of one of each. I have tried turning the visibly on / off in the ipn. I have also toggled the associativity on / off. The view shows the correct image during its preview, but when the view is done being created, it shows the wrong part again.
View 6 Replies View RelatedI use Xara Xtreme Pro 3, and when I open a pdf file for editing, the color gradients don't show up. They are definitely there in the pdf file (I can see them in Adobe Reader) but Xara doesn't seem to display them.
Let me know if I can upload images, pdfs, more info, etc
I need to show feet and meters in my drawing. I got them to show up, however the decimal is in the wrong spot. Instead of it being 1.8288 meters for 6 ft., it's showing as 1828.8. Everything I read says to 'just move the decimal'. But how do I do that without overriding the actual dimension?
View 4 Replies View RelatedI posted a version of the Offset command that lets you Undo individual Offsets and change the offset distance/Through option, without getting out of the command, at Cadalyst CAD Tips: URL....
It's an upgraded version of an earlier concept by Gopal Ramesh. It's been downloaded almost three times every day since it went up, so I guess people expect it will be useful.
But the website's description includes: "this routine does not provide access to the Layer or Erase options of the built-in Offset command." The reason for that is that I'm working back in 2004, so those options are not present for me to emulate. [The Undo option in the routine is one that was added in some later version, but is a very useful enhancement for people using older versions, like me.]
I do also have an Offset-to-any-Layer [not just the source's or the current Layer] routine posted there: URL....
And I have a simple little routine to Offset something and Erase the source object. So I think I have all the "pieces" to include those options that newer versions have, but that I don't. I would like to combine the functionalities into the Offset-with-running-options routine. That way, if people want to use it to redefine the Offset command as I have done, in order to get the while-running distance change option, those working in newer versions won't be losing the Erase and Layer options in the process, and those in older versions will be gaining yet more options.